- fix NAND_CMD_READID command for ONFI detect.
- add NAND_CMD_PARAM command to read the ONFI parameter page.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
/* READID must read all 5 possible bytes while CEB is active */
case NAND_CMD_READID:
/* READID must read all 5 possible bytes while CEB is active */
case NAND_CMD_READID:
- vdbg("fsl_elbc_cmdfunc: NAND_CMD_READID.\n");
+ case NAND_CMD_PARAM:
+ vdbg("fsl_elbc_cmdfunc: NAND_CMD 0x%x.\n", command);
out_be32(&lbc->fir, (FIR_OP_CW0 << FIR_OP0_SHIFT) |
(FIR_OP_UA << FIR_OP1_SHIFT) |
(FIR_OP_RBW << FIR_OP2_SHIFT));
out_be32(&lbc->fir, (FIR_OP_CW0 << FIR_OP0_SHIFT) |
(FIR_OP_UA << FIR_OP1_SHIFT) |
(FIR_OP_RBW << FIR_OP2_SHIFT));
- out_be32(&lbc->fcr, NAND_CMD_READID << FCR_CMD0_SHIFT);
- /* 5 bytes for manuf, device and exts */
- out_be32(&lbc->fbcr, 5);
- ctrl->read_bytes = 5;
+ out_be32(&lbc->fcr, command << FCR_CMD0_SHIFT);
+ /*
+ * although currently it's 8 bytes for READID, we always read
+ * the maximum 256 bytes(for PARAM)
+ */
+ out_be32(&lbc->fbcr, 256);
+ ctrl->read_bytes = 256;
set_addr(mtd, 0, 0, 0);
fsl_elbc_run_command(mtd);
return;
set_addr(mtd, 0, 0, 0);
fsl_elbc_run_command(mtd);
return;