dbg() was used a lot a long time ago to trace code flow. Now that we have
ftrace, this isn't needed at all, so remove these calls.
CC: Johan Hovold <jhovold@gmail.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
unsigned long flags;
int result;
unsigned long flags;
int result;
- dbg("%s(port = %d)", __func__, port->number);
-
new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
if (new_setup == NULL) {
dev_err(&port->dev, "%s(): out of memory!\n", __func__);
new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
if (new_setup == NULL) {
dev_err(&port->dev, "%s(): out of memory!\n", __func__);
unsigned long flags;
u8 *allow;
unsigned long flags;
u8 *allow;
- dbg("%s(port = %d)", __func__, port->number);
-
spin_lock_irqsave(&priv->lock, flags);
if (priv->flags.write_urb_in_use) {
spin_unlock_irqrestore(&priv->lock, flags);
spin_lock_irqsave(&priv->lock, flags);
if (priv->flags.write_urb_in_use) {
spin_unlock_irqrestore(&priv->lock, flags);
static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
- dbg("%s(port = %d, count = %d)", __func__, port->number, count);
-
if (!count)
return count;
if (!count)
return count;
int room = 0;
unsigned long flags;
int room = 0;
unsigned long flags;
- dbg("%s(port = %d)", __func__, port->number);
-
spin_lock_irqsave(&port->lock, flags);
room = kfifo_avail(&port->write_fifo);
spin_unlock_irqrestore(&port->lock, flags);
spin_lock_irqsave(&port->lock, flags);
room = kfifo_avail(&port->write_fifo);
spin_unlock_irqrestore(&port->lock, flags);
int chars = 0;
unsigned long flags;
int chars = 0;
unsigned long flags;
- dbg("%s(port = %d)", __func__, port->number);
-
spin_lock_irqsave(&port->lock, flags);
chars = kfifo_len(&port->write_fifo);
spin_unlock_irqrestore(&port->lock, flags);
spin_lock_irqsave(&port->lock, flags);
chars = kfifo_len(&port->write_fifo);
spin_unlock_irqrestore(&port->lock, flags);
- dbg("%s(port = %d)", __func__, port->number);
-
if (!tty) {
dbg("%s(): no tty structures", __func__);
return;
if (!tty) {
dbg("%s(): no tty structures", __func__);
return;
unsigned long flags;
int result;
unsigned long flags;
int result;
- dbg("%s(port = %d)", __func__, port->number);
-
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s(port = %d)", __func__, port->number);
-
spin_lock_irqsave(&port->lock, flags);
/* clear out any remaining data in the buffer */
kfifo_reset_out(&port->write_fifo);
spin_lock_irqsave(&port->lock, flags);
/* clear out any remaining data in the buffer */
kfifo_reset_out(&port->write_fifo);
unsigned pin_state;
unsigned result = 0;
unsigned pin_state;
unsigned result = 0;
- dbg("%s(port = %d)", __func__, port->number);
-
spin_lock_irqsave(&priv->lock, flags);
pin_state = priv->status.pin_state & PIN_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
spin_lock_irqsave(&priv->lock, flags);
pin_state = priv->status.pin_state & PIN_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s()", __func__);
-
for (i = 0; i < serial->num_ports; ++i)
kfree(usb_get_serial_port_data(serial->port[i]));
}
for (i = 0; i < serial->num_ports; ++i)
kfree(usb_get_serial_port_data(serial->port[i]));
}
int transient = 0, can_recv = 0, resubmit = 1;
int status = urb->status;
int transient = 0, can_recv = 0, resubmit = 1;
int status = urb->status;
- dbg("%s(port = %d, status = %d)",
- __func__, port->number, status);
-
switch (status) {
case 0:
/* success */
switch (status) {
case 0:
/* success */
int status = urb->status;
int result;
int status = urb->status;
int result;
- dbg("%s(port = %d, status = %d)",
- __func__, port->number, status);
-
spin_lock_irqsave(&priv->lock, flags);
priv->flags.read_urb_in_use = 0;
spin_unlock_irqrestore(&priv->lock, flags);
spin_lock_irqsave(&priv->lock, flags);
priv->flags.read_urb_in_use = 0;
spin_unlock_irqrestore(&priv->lock, flags);
int status = urb->status;
int result;
int status = urb->status;
int result;
- dbg("%s(port = %d, status = %d)",
- __func__, port->number, status);
-
switch (status) {
case 0:
/* success */
switch (status) {
case 0:
/* success */