arm: mvebu: Setup the MBUS bridge registers

With this patch, the MBUS bridge registers (base and size) are
configured upon each call to mbus_dt_setup_win(). This is needed, since
the board code can also call this function in later boot stages. As
done in the maxbcm board.

This is needed to fix a problem with the secondary CPU's not booting
in Linux on AXP.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Peter Morrow <peter@senient.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>

diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index 125b5f278d695bc136a512a79352670b3b4d3657..71254c5d4673941242c12dcbf1e7a826005e37e0 100644 (file)
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -66,6 +66,9 @@
 #define MVEBU_SATA0_BASE       (MVEBU_REGISTER(0xa8000))
 #define MVEBU_SDIO_BASE                (MVEBU_REGISTER(0xd8000))
 
 #define MVEBU_SATA0_BASE       (MVEBU_REGISTER(0xa8000))
 #define MVEBU_SDIO_BASE                (MVEBU_REGISTER(0xd8000))
 

+#define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250))
+#define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254))
+

 #define SDRAM_MAX_CS           4
 #define SDRAM_ADDR_MASK                0xFF000000
 
 #define SDRAM_MAX_CS           4
 #define SDRAM_ADDR_MASK                0xFF000000
 

diff --git a/arch/arm/mach-mvebu/mbus.c b/arch/arm/mach-mvebu/mbus.c
index 9b76bce91d03a11d2a7f5246e5751e2bcea794a4..71fa69325724a392b838c90aeb04faea81982e1c 100644 (file)
--- a/arch/arm/mach-mvebu/mbus.c
+++ b/arch/arm/mach-mvebu/mbus.c
@@ -52,6 +52,7 @@
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>

+#include <linux/compat.h>

 #include <linux/mbus.h>
 
 #define BIT(nr)                        (1UL << (nr))
 #include <linux/mbus.h>
 
 #define BIT(nr)                        (1UL << (nr))


@@ -407,6 +408,53 @@ int mvebu_mbus_del_window(phys_addr_t base, size_t size)
        return 0;
 }
 
        return 0;
 }
 

+static void mvebu_mbus_get_lowest_base(struct mvebu_mbus_state *mbus,
+                                      phys_addr_t *base)
+{
+       int win;
+       *base = 0xffffffff;
+
+       for (win = 0; win < mbus->soc->num_wins; win++) {
+               u64 wbase;
+               u32 wsize;
+               u8 wtarget, wattr;
+               int enabled;
+
+               mvebu_mbus_read_window(mbus, win,
+                                      &enabled, &wbase, &wsize,
+                                      &wtarget, &wattr, NULL);
+
+               if (!enabled)
+                       continue;
+
+               if (wbase < *base)
+                       *base = wbase;
+       }
+}
+
+static void mvebu_config_mbus_bridge(struct mvebu_mbus_state *mbus)
+{
+       phys_addr_t base;
+       u32 val;
+       u32 size;
+
+       /* Set MBUS bridge base/ctrl */
+       mvebu_mbus_get_lowest_base(&mbus_state, &base);
+
+       size = 0xffffffff - base + 1;
+       if (!is_power_of_2(size)) {
+               /* Round up to next power of 2 */
+               size = 1 << (ffs(base) + 1);
+               base = 0xffffffff - size + 1;
+       }
+
+       /* Now write base and size */
+       writel(base, MBUS_BRIDGE_WIN_BASE_REG);
+       /* Align window size to 64KiB */
+       val = (size / (64 << 10)) - 1;
+       writel((val << 16) | 0x1, MBUS_BRIDGE_WIN_CTRL_REG);
+}
+

 int mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
                      u32 base, u32 size, u8 target, u8 attr)
 {
 int mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
                      u32 base, u32 size, u8 target, u8 attr)
 {


@@ -426,6 +474,13 @@ int mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
                        return -ENOMEM;
        }
 
                        return -ENOMEM;
        }
 

+       /*
+        * Re-configure the mbus bridge registers each time this function
+        * is called. Since it may get called from the board code in
+        * later boot stages as well.
+        */
+       mvebu_config_mbus_bridge(mbus);
+

        return 0;
 }
 
        return 0;
 }