+ return 0;
+}
+
+int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
+{
+ struct bnx2x *bp = netdev_priv(dev);
+ int rc, q_logical_state;
+ struct bnx2x_virtf *vf = BP_VF(bp, vfidx);
+ struct pf_vf_bulletin_content *bulletin = BP_VF_BULLETIN(bp, vfidx);
+
+ /* sanity */
+ rc = bnx2x_vf_ndo_sanity(bp, vfidx, vf);
+ if (rc)
+ return rc;
+
+ if (vlan > 4095) {
+ BNX2X_ERR("illegal vlan value %d\n", vlan);
+ return -EINVAL;
+ }
+
+ DP(BNX2X_MSG_IOV, "configuring VF %d with VLAN %d qos %d\n",
+ vfidx, vlan, 0);
+
+ /* update PF's copy of the VF's bulletin. No point in posting the vlan
+ * to the VF since it doesn't have anything to do with it. But it useful
+ * to store it here in case the VF is not up yet and we can only
+ * configure the vlan later when it does.
+ */
+ bulletin->valid_bitmap |= 1 << VLAN_VALID;
+ bulletin->vlan = vlan;
+
+ /* is vf initialized and queue set up? */
+ q_logical_state =
+ bnx2x_get_q_logical_state(bp, &bnx2x_vfq(vf, 0, sp_obj));
+ if (vf->state == VF_ENABLED &&
+ q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) {
+ /* configure the vlan in device on this vf's queue */
+ unsigned long ramrod_flags = 0;
+ unsigned long vlan_mac_flags = 0;
+ struct bnx2x_vlan_mac_obj *vlan_obj =
+ &bnx2x_vfq(vf, 0, vlan_obj);
+ struct bnx2x_vlan_mac_ramrod_params ramrod_param;
+ struct bnx2x_queue_state_params q_params = {NULL};
+ struct bnx2x_queue_update_params *update_params;
+
+ memset(&ramrod_param, 0, sizeof(ramrod_param));
+
+ /* must lock vfpf channel to protect against vf flows */
+ bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+
+ /* remove existing vlans */
+ __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags,
+ &ramrod_flags);
+ if (rc) {
+ BNX2X_ERR("failed to delete vlans\n");
+ return -EINVAL;
+ }
+
+ /* send queue update ramrod to configure default vlan and silent
+ * vlan removal
+ */
+ __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags);
+ q_params.cmd = BNX2X_Q_CMD_UPDATE;
+ q_params.q_obj = &bnx2x_vfq(vf, 0, sp_obj);
+ update_params = &q_params.params.update;
+ __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG,
+ &update_params->update_flags);
+ __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
+ &update_params->update_flags);
+
+ if (vlan == 0) {
+ /* if vlan is 0 then we want to leave the VF traffic
+ * untagged, and leave the incoming traffic untouched
+ * (i.e. do not remove any vlan tags).
+ */
+ __clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
+ &update_params->update_flags);
+ __clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
+ &update_params->update_flags);
+ } else {
+ /* configure the new vlan to device */
+ __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+ ramrod_param.vlan_mac_obj = vlan_obj;
+ ramrod_param.ramrod_flags = ramrod_flags;
+ ramrod_param.user_req.u.vlan.vlan = vlan;
+ ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
+ rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
+ if (rc) {
+ BNX2X_ERR("failed to configure vlan\n");
+ return -EINVAL;
+ }
+
+ /* configure default vlan to vf queue and set silent
+ * vlan removal (the vf remains unaware of this vlan).
+ */
+ update_params = &q_params.params.update;
+ __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN,
+ &update_params->update_flags);
+ __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM,
+ &update_params->update_flags);
+ update_params->def_vlan = vlan;
+ }
+
+ /* Update the Queue state */
+ rc = bnx2x_queue_state_change(bp, &q_params);
+ if (rc) {
+ BNX2X_ERR("Failed to configure default VLAN\n");
+ return rc;
+ }
+
+ /* clear the flag indicating that this VF needs its vlan
+ * (will only be set if the HV configured th Vlan before vf was
+ * and we were called because the VF came up later
+ */
+ vf->cfg_flags &= ~VF_CFG_VLAN;
+
+ bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
+ }
+ return 0;