+#
+# Unusual variables checked by this code:
+# NOP - two byte opcode for no-op (defaults to 0)
+# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
+# (e.g., .PARISC.milli)
+# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+# (e.g., .PARISC.global)
+# OTHER_SECTIONS - at the end
+# EXECUTABLE_SYMBOLS - symbols that must be defined for an
+# executable (e.g., _DYNAMIC_LINK)
+# TEXT_START_SYMBOLS - symbols that appear at the start of the
+# .text section.
+# DATA_START_SYMBOLS - symbols that appear at the start of the
+# .data section.
+# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+# .bss section besides __bss_start.
+# DATA_PLT - .plt should be in data segment, not text segment.
+# EMBEDDED - whether this is for an embedded system.
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+test -z "$ENTRY" && ENTRY=_start
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
+
+# if this is for an embedded system, don't add SIZEOF_HEADERS.
+if [ -z "$EMBEDDED" ]; then
+ test -z "${READONLY_BASE_ADDRESS}" && READONLY_BASE_ADDRESS="${READONLY_START_ADDR} + SIZEOF_HEADERS"
+else
+ test -z "${READONLY_BASE_ADDRESS}" && READONLY_BASE_ADDRESS="${READONLY_START_ADDR}"
+fi
+
+cat <<EOF
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+ "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${OUTPUT_ARCH})
+ENTRY(${ENTRY})
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+/* Do we need any of these for elf?
+ __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
+${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ ${CREATE_SHLIB-${RELOCATING+. = ${READONLY_BASE_ADDRESS};}}
+ ${CREATE_SHLIB+${RELOCATING+. = SIZEOF_HEADERS;}}
+ ${CREATE_SHLIB-${INTERP}}
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss) }
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
+ ${DATA_PLT-${PLT}}
+ .rodata ${RELOCATING-0} : { *(.rodata) *(.gnu.linkonce.r*) }
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
+ ${RELOCATING+${OTHER_READONLY_SECTIONS}}
+
+ /* Adjust the address for the data segment. */
+ ${RELOCATING+. = ${DATA_ADDR-ALIGN(4);}}
+
+ .data ${RELOCATING-0} :
+ {
+ ${RELOCATING+${DATA_START_SYMBOLS}}
+ *(.data)
+ *(.gnu.linkonce.d*)
+ ${CONSTRUCTING+CONSTRUCTORS}
+ }
+ .data1 ${RELOCATING-0} : { *(.data1) }
+ ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
+ .ctors ${RELOCATING-0} :
+ {
+ ${CONSTRUCTING+${CTOR_START}}
+ *(SORT(.ctors.*))
+ *(.ctors)
+ ${CONSTRUCTING+${CTOR_END}}
+ }
+ .dtors ${RELOCATING-0} :
+ {
+ ${CONSTRUCTING+${DTOR_START}}
+ *(SORT(.dtors.*))
+ *(.dtors)
+ ${CONSTRUCTING+${DTOR_END}}
+ }
+ .got ${RELOCATING-0} : { *(.got.plt) *(.got) }
+ .dynamic ${RELOCATING-0} : { *(.dynamic) }
+ ${DATA_PLT+${PLT}}
+ /* We want the small data sections together, so single-instruction offsets
+ can access them all, and initialized data all before uninitialized, so
+ we can shorten the on-disk segment size. */
+ .sdata ${RELOCATING-0} : { *(.sdata) }
+ ${RELOCATING+_edata = .;}
+ ${RELOCATING+PROVIDE (edata = .);}
+ ${RELOCATING+__bss_start = .;}
+ ${RELOCATING+${OTHER_BSS_SYMBOLS}}
+ .sbss ${RELOCATING-0} : { *(.sbss) *(.scommon) }
+ .bss ${RELOCATING-0} :
+ {
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ ${RELOCATING+_end = . ;}
+ ${RELOCATING+PROVIDE (end = .);}
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+
+ .comment 0 : { *(.comment) }
+
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+
+ ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
+
+ /* These must appear regardless of ${RELOCATING}. */
+ ${OTHER_SECTIONS}
+
+
+ /* Hmmm, there's got to be a better way. This sets the stack to the
+ top of the simulator memory (i.e. top of 64K data space). */
+ .stack 0x00007FFE : { _stack = .; *(.stack) }
+
+ .text ${RELOCATING+${TEXT_START_ADDR}} :
+ {
+ ${RELOCATING+${TEXT_START_SYMBOLS}}
+ *(.init)
+ *(.fini)
+ *(.text)
+ /* .gnu.warning sections are handled specially by elf32.em. */
+ *(.gnu.warning)
+ *(.gnu.linkonce.t*)
+ } =${NOP-0}
+ ${RELOCATING+_etext = .;}
+ ${RELOCATING+PROVIDE (etext = .);}
+}
+EOF
projects / external / binutils.git / commitdiff