[ Upstream commit
adb8049097a9ec4acd09fbd3aa8636199a78df8a ]
x86_energy_perf_policy first uses __get_cpuid() to check the maximum
CPUID level and exits if it is too low. It then assumes that later
calls will succeed (which I think is architecturally guaranteed). It
also assumes that CPUID works at all (which is not guaranteed on
x86_32).
If optimisations are enabled, gcc warns about potentially
uninitialized variables. Fix this by adding an exit-on-error after
every call to __get_cpuid() instead of just checking the maximum
level.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
if (system("/sbin/modprobe msr > /dev/null 2>&1"))
err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" ");
}
if (system("/sbin/modprobe msr > /dev/null 2>&1"))
err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" ");
}
+
+static void get_cpuid_or_exit(unsigned int leaf,
+ unsigned int *eax, unsigned int *ebx,
+ unsigned int *ecx, unsigned int *edx)
+{
+ if (!__get_cpuid(leaf, eax, ebx, ecx, edx))
+ errx(1, "Processor not supported\n");
+}
+
/*
* early_cpuid()
* initialize turbo_is_enabled, has_hwp, has_epb
/*
* early_cpuid()
* initialize turbo_is_enabled, has_hwp, has_epb
*/
void early_cpuid(void)
{
*/
void early_cpuid(void)
{
- unsigned int eax, ebx, ecx, edx, max_level;
+ unsigned int eax, ebx, ecx, edx;
unsigned int fms, family, model;
unsigned int fms, family, model;
- __get_cpuid(0, &max_level, &ebx, &ecx, &edx);
-
- if (max_level < 6)
- errx(1, "Processor not supported\n");
-
- __get_cpuid(1, &fms, &ebx, &ecx, &edx);
+ get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx);
family = (fms >> 8) & 0xf;
model = (fms >> 4) & 0xf;
if (family == 6 || family == 0xf)
family = (fms >> 8) & 0xf;
model = (fms >> 4) & 0xf;
if (family == 6 || family == 0xf)
bdx_highest_ratio = msr & 0xFF;
}
bdx_highest_ratio = msr & 0xFF;
}
- __get_cpuid(0x6, &eax, &ebx, &ecx, &edx);
+ get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx);
turbo_is_enabled = (eax >> 1) & 1;
has_hwp = (eax >> 7) & 1;
has_epb = (ecx >> 3) & 1;
turbo_is_enabled = (eax >> 1) & 1;
has_hwp = (eax >> 7) & 1;
has_epb = (ecx >> 3) & 1;
eax = ebx = ecx = edx = 0;
eax = ebx = ecx = edx = 0;
- __get_cpuid(0, &max_level, &ebx, &ecx, &edx);
+ get_cpuid_or_exit(0, &max_level, &ebx, &ecx, &edx);
if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
genuine_intel = 1;
if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
genuine_intel = 1;
fprintf(stderr, "CPUID(0): %.4s%.4s%.4s ",
(char *)&ebx, (char *)&edx, (char *)&ecx);
fprintf(stderr, "CPUID(0): %.4s%.4s%.4s ",
(char *)&ebx, (char *)&edx, (char *)&ecx);
- __get_cpuid(1, &fms, &ebx, &ecx, &edx);
+ get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx);
family = (fms >> 8) & 0xf;
model = (fms >> 4) & 0xf;
stepping = fms & 0xf;
family = (fms >> 8) & 0xf;
model = (fms >> 4) & 0xf;
stepping = fms & 0xf;
errx(1, "CPUID: no MSR");
errx(1, "CPUID: no MSR");
- __get_cpuid(0x6, &eax, &ebx, &ecx, &edx);
+ get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx);
/* turbo_is_enabled already set */
/* has_hwp already set */
has_hwp_notify = eax & (1 << 8);
/* turbo_is_enabled already set */
/* has_hwp already set */
has_hwp_notify = eax & (1 << 8);