This is a collection of all the whitespace, renames, comment, and other
changes that should not change the DT functionality from Linux v6.3-rc6.
Signed-off-by: Andrew Davis <afd@ti.com>
enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
panel-info {
enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
panel-info {
- ac-bias = <255>;
- ac-bias-intrpt = <0>;
- dma-burst-sz = <16>;
- bpp = <16>;
- fdd = <0x80>;
- sync-edge = <0>;
- sync-ctrl = <1>;
- raster-order = <0>;
- fifo-th = <0>;
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p64";
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p64";
stdout-path = &serial1;
};
stdout-path = &serial1;
};
device_type = "memory";
reg = <0xc0000000 0x04000000>;
};
device_type = "memory";
reg = <0xc0000000 0x04000000>;
};
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
edma0: edma@0 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
reg-names = "edma3_cc";
interrupts = <11 12>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
reg-names = "edma3_cc";
interrupts = <11 12>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
};
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
};
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 1>;
};
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 1>;
};
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 2>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc0 2>;
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
- reg = <0x230000 0x8000>;
+ reg = <0x230000 0x8000>;
reg-names = "edma3_cc";
interrupts = <93 94>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
reg-names = "edma3_cc";
interrupts = <93 94>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
};
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
};
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
- reg = <0x238000 0x400>;
+ reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc1 21>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
power-domains = <&psc1 21>;
power-domains = <&psc1 17>;
status = "disabled";
};
power-domains = <&psc1 17>;
status = "disabled";
};
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
power-domains = <&psc1 20>;
status = "disabled";
};
power-domains = <&psc1 20>;
status = "disabled";
};
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
power-domains = <&psc1 20>;
status = "disabled";
};
power-domains = <&psc1 20>;
status = "disabled";
};
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
#pwm-cells = <3>;
cppi41dma: dma-controller@201000 {
compatible = "ti,da830-cppi41";
cppi41dma: dma-controller@201000 {
compatible = "ti,da830-cppi41";
0x202000 0x1000
0x204000 0x4000>;
reg-names = "controller",
0x202000 0x1000
0x204000 0x4000>;
reg-names = "controller",
label = "X-Loader";
reg = <0 0x80000>;
};
label = "X-Loader";
reg = <0 0x80000>;
};
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
label = "Environment";
reg = <0x240000 0x40000>;
};
label = "Environment";
reg = <0x240000 0x40000>;
};
label = "Kernel";
reg = <0x280000 0x500000>;
};
label = "Kernel";
reg = <0x280000 0x500000>;
};
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
compatible = "w25x32";
spi-max-frequency = <48000000>;
reg = <0>;
compatible = "w25x32";
spi-max-frequency = <48000000>;
reg = <0>;
ranges;
prcm: prcm@48180000 {
ranges;
prcm: prcm@48180000 {
- compatible = "ti,dm816-prcm";
+ compatible = "ti,dm816-prcm", "simple-bus";
reg = <0x48180000 0x4000>;
reg = <0x48180000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48180000 0x4000>;
prcm_clocks: clocks {
#address-cells = <1>;
prcm_clocks: clocks {
#address-cells = <1>;
dm816x_pinmux: pinmux@800 {
compatible = "pinctrl-single";
reg = <0x800 0x50a>;
dm816x_pinmux: pinmux@800 {
compatible = "pinctrl-single";
reg = <0x800 0x50a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xf>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
scrm_clockdomains: clockdomains {
};
scrm_clockdomains: clockdomains {
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
#mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
ti,mbox-tx = <3 0 0>;
ti,mbox-rx = <0 0 0>;
};
ti,mbox-tx = <3 0 0>;
ti,mbox-rx = <0 0 0>;
};
+ uart1: serial@48020000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart1";
reg = <0x48020000 0x2000>;
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart1";
reg = <0x48020000 0x2000>;
dma-names = "tx", "rx";
};
dma-names = "tx", "rx";
};
+ uart2: serial@48022000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart2";
reg = <0x48022000 0x2000>;
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart2";
reg = <0x48022000 0x2000>;
dma-names = "tx", "rx";
};
dma-names = "tx", "rx";
};
+ uart3: serial@48024000 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart3";
reg = <0x48024000 0x2000>;
compatible = "ti,am3352-uart", "ti,omap3-uart";
ti,hwmods = "uart3";
reg = <0x48024000 0x2000>;