+ # Setups where regulator (especially the buck8) output voltage is scaled
+ # by adding external connection where some other regulator output is
+ # connected to feedback-pin (over suitable resistors) is getting popular
+ # amongst users of BD71837. (This allows for example scaling down the
+ # buck8 voltages to suit lover GPU voltages for projects where buck8 is
+ # (ab)used to supply power for GPU.
+ #
+ # So we allow describing this external connection from DT and scale the
+ # voltages accordingly. This is what the connection should look like:
+ #
+ # |---------------|
+ # | buck 8 |-------+----->Vout
+ # | | |
+ # |---------------| |
+ # | |
+ # | |
+ # +-------+--R2----+
+ # |
+ # R1
+ # |
+ # V FB-pull-up
+ #
+ # Here the buck output is sifted according to formula:
+ #
+ # Vout_o = Vo - (Vpu - Vo)*R2/R1
+ # Linear_step = step_orig*(R1+R2)/R1
+ #
+ # where:
+ # Vout_o is adjusted voltage output at vsel reg value 0
+ # Vo is original voltage output at vsel reg value 0
+ # Vpu is the pull-up voltage V FB-pull-up in the picture
+ # R1 and R2 are resistor values.
+
+ rohm,fb-pull-up-microvolt:
+ description:
+ Feedback-pin has pull-up connection to adjust voltage range. This is
+ the used pull-up voltage before R1.
+
+ rohm,feedback-pull-up-r1-ohms:
+ description:
+ Feedback-pin has pull-up connection to adjust voltage range. This is
+ the used R1 resistor.
+
+ rohm,feedback-pull-up-r2-ohms:
+ description:
+ Feedback-pin has pull-up connection to adjust voltage range. This is
+ the used R2 resistor.
+