This makes the FAT and ext4 filesystem implementations build if
CONFIG_FS_{FAT,EXT4} are defined, rather than basing the build on
whether CONFIG_CMD_{FAT,EXT*} are defined. This will allow the
filesystems to be built separately from the filesystem-specific commands
that use them. This paves the way for the creation of filesystem-generic
commands that used the filesystems, without requiring the filesystem-
specific commands.
Minor documentation changes are made for this change.
The new config options are automatically selected by the old config
options to retain backwards-compatibility.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
CONFIG_CMD_EEPROM * EEPROM read/write support
CONFIG_CMD_ELF * bootelf, bootvx
CONFIG_CMD_EXPORTENV * export the environment
CONFIG_CMD_EEPROM * EEPROM read/write support
CONFIG_CMD_ELF * bootelf, bootvx
CONFIG_CMD_EXPORTENV * export the environment
+ CONFIG_CMD_EXT2 * ext2 command support
+ CONFIG_CMD_EXT4 * ext4 command support
CONFIG_CMD_SAVEENV saveenv
CONFIG_CMD_FDC * Floppy Disk Support
CONFIG_CMD_SAVEENV saveenv
CONFIG_CMD_FDC * Floppy Disk Support
- CONFIG_CMD_FAT * FAT partition support
+ CONFIG_CMD_FAT * FAT command support
CONFIG_CMD_FDOS * Dos diskette Support
CONFIG_CMD_FLASH flinfo, erase, protect
CONFIG_CMD_FPGA FPGA device initialization support
CONFIG_CMD_FDOS * Dos diskette Support
CONFIG_CMD_FLASH flinfo, erase, protect
CONFIG_CMD_FPGA FPGA device initialization support
This patch series adds support for ext4 ls,load and write features in uboot
Journaling is supported for write feature.
This patch series adds support for ext4 ls,load and write features in uboot
Journaling is supported for write feature.
+To enable support for the ext4 (and ext2) filesystem implementation,
+#define CONFIG_FS_EXT4
+
+If you want write support,
+#define CONFIG_EXT4_WRITE
+
To Enable ext2 ls and load commands, modify the board specific config file with
#define CONFIG_CMD_EXT2
To Enable ext2 ls and load commands, modify the board specific config file with
#define CONFIG_CMD_EXT2
+This automatically defines CONFIG_FS_EXT4 for you.
To Enable ext4 ls and load commands, modify the board specific config file with
#define CONFIG_CMD_EXT4
To Enable ext4 ls and load commands, modify the board specific config file with
#define CONFIG_CMD_EXT4
+This automatically defines CONFIG_FS_EXT4 for you.
To enable ext4 write command, modify the board specific config file with
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
To enable ext4 write command, modify the board specific config file with
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
+These automatically define CONFIG_FS_EXT4 and CONFIG_EXT4_WRITE for you.
+
+Also relevant are the generic filesystem commands,
+#define CONFIG_CMD_FS_GENERIC
+This does not automatically enable EXT4 support for you.
LIB = $(obj)libext4fs.o
AOBJS =
LIB = $(obj)libext4fs.o
AOBJS =
-COBJS-$(CONFIG_CMD_EXT4) := ext4fs.o ext4_common.o dev.o
-ifndef CONFIG_CMD_EXT4
-COBJS-$(CONFIG_CMD_EXT2) := ext4fs.o ext4_common.o dev.o
-endif
-COBJS-$(CONFIG_CMD_EXT4_WRITE) += ext4_journal.o crc16.o
+COBJS-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o
+COBJS-$(CONFIG_EXT4_WRITE) += ext4_journal.o crc16.o
SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y))
SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y))
struct ext2_inode *g_parent_inode;
static int symlinknest;
struct ext2_inode *g_parent_inode;
static int symlinknest;
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n)
{
uint32_t res = size / n;
uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n)
{
uint32_t res = size / n;
#include <ext4fs.h>
#include <malloc.h>
#include <asm/errno.h>
#include <ext4fs.h>
#include <malloc.h>
#include <asm/errno.h>
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
#include "ext4_journal.h"
#include "crc16.h"
#endif
#include "ext4_journal.h"
#include "crc16.h"
#endif
int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name,
struct ext2fs_node **fnode, int *ftype);
int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name,
struct ext2fs_node **fnode, int *ftype);
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n);
int ext4fs_checksum_update(unsigned int i);
int ext4fs_get_parent_inode_num(const char *dirname, char *dname, int flags);
uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n);
int ext4fs_checksum_update(unsigned int i);
int ext4fs_get_parent_inode_num(const char *dirname, char *dname, int flags);
return ext4fs_read_file(ext4fs_file, 0, len, buf);
}
return ext4fs_read_file(ext4fs_file, 0, len, buf);
}
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
static void ext4fs_update(void)
{
short i;
static void ext4fs_update(void)
{
short i;
LIB = $(obj)libfat.o
AOBJS =
LIB = $(obj)libfat.o
AOBJS =
-COBJS-$(CONFIG_CMD_FAT) := fat.o
+COBJS-$(CONFIG_FS_FAT) := fat.o
COBJS-$(CONFIG_FAT_WRITE):= fat_write.o
ifndef CONFIG_SPL_BUILD
COBJS-$(CONFIG_FAT_WRITE):= fat_write.o
ifndef CONFIG_SPL_BUILD
-COBJS-$(CONFIG_CMD_FAT) += file.o
+COBJS-$(CONFIG_FS_FAT) += file.o
endif
SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
endif
SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#endif
+#if defined(CONFIG_CMD_FAT) && !defined(CONFIG_FS_FAT)
+#define CONFIG_FS_FAT
+#endif
+
+#if (defined(CONFIG_CMD_EXT4) || defined(CONFIG_CMD_EXT2)) && \
+ !defined(CONFIG_FS_EXT4)
+#define CONFIG_FS_EXT4
+#endif
+
+#if defined(CONFIG_CMD_EXT4_WRITE) && !defined(CONFIG_EXT4_WRITE)
+#define CONFIG_EXT4_WRITE
+#endif
+
#endif /* __CONFIG_FALLBACKS_H */
#endif /* __CONFIG_FALLBACKS_H */
extern struct ext2_data *ext4fs_root;
extern struct ext2fs_node *ext4fs_file;
extern struct ext2_data *ext4fs_root;
extern struct ext2fs_node *ext4fs_file;
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
extern struct ext2_inode *g_parent_inode;
extern int gd_index;
extern int gindex;
extern struct ext2_inode *g_parent_inode;
extern int gd_index;
extern int gindex;