usb: gadget: ci13xxx: rename register layouts
authorAlexander Shishkin <alexander.shishkin@linux.intel.com>
Fri, 4 May 2012 13:47:16 +0000 (16:47 +0300)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 8 May 2012 16:27:57 +0000 (09:27 -0700)
commitf9df8395c7f9b1b8d0ea9221595a97f2f4720359
treed8fea00b1dd8194e091380537b99e92bbbf59486
parentd36ade60e3cc212992f001d2046815b068073c0c
usb: gadget: ci13xxx: rename register layouts

Currently, the register prefixes in the driver seem to be mixed: the
capability registers are the ones that contain capability information,
such as number of hardware endpoints, while the registers that are
used to program the controller are called operational registers.

Normally, capability registers start at 0x100 offset of the register
window and are followed by operational registers. In some versions,
however, capability registers start at 0x0 offset.

This patch renames the register and adjusts their offsets appropriately,
leaving the possibility of having a non-standard capability offset.

I couldn't find any mentions of the TESTMODE register anywhere, so I
suspect it might only be enabled in chipidea internal versions of the
controller and I'm really inclined to remove it from the driver or at
least hiding it behind a config option.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/gadget/ci13xxx_msm.c
drivers/usb/gadget/ci13xxx_pci.c
drivers/usb/gadget/ci13xxx_udc.c
drivers/usb/gadget/ci13xxx_udc.h