ARM: OMAP: beagle: Set USB Host Port 1 to OMAP_USBHS_PORT_MODE_UNUSED
authorBrian Austin <brian.austin@cirrus.com>
Thu, 21 Jun 2012 08:36:02 +0000 (01:36 -0700)
committerTony Lindgren <tony@atomide.com>
Thu, 21 Jun 2012 08:36:02 +0000 (01:36 -0700)
commitf6f6c9a5be996f266ff6fbe7850d76c3b0bdab95
tree5a889c0d4e461afa6d632e23c609d39a13f12e7b
parentda0085ff9b2ca9ad21fd9fb380247e6639cccacd
ARM: OMAP: beagle: Set USB Host Port 1 to OMAP_USBHS_PORT_MODE_UNUSED

The beagleboard USB Host Port that is used is Port 2. The platform driver
sets MODE_PHY for port 1 causing pin muxing to override the pins on the
expansion connector P17 when using board_mux[]. Since USBHS Port 1 is not
connected remove the case for muxing the USB Port1 pins by default.

Tested with BeagleBoard xM revC and checked the userguides for Beagle xM
and revC to be sure USB Port2 is what is used.

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Acked-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/board-omap3beagle.c