powerpc/85xx: Add Support for Freescale P1010 Processor
authorPoonam Aggrwal <poonam.aggrwal@freescale.com>
Thu, 13 Jan 2011 16:09:27 +0000 (21:39 +0530)
committerKumar Gala <galak@kernel.crashing.org>
Thu, 20 Jan 2011 04:58:23 +0000 (22:58 -0600)
commitb8cdd014629133c554b81df0447c748d10960583
tree73d2067d2a1438bee34417004fd891686d877b57
parent17028be23887ea6d467e63e115c49b516ae58746
powerpc/85xx: Add Support for Freescale P1010 Processor

Key Features include of the P1010:
* e500v2 core frequency operation of 500 to 800 MHz
* Power consumption less than 5.0 W at 800 MHz core speed
* Dual SATA 3 Gbps controllers with integrated PHY
* Dual PCI Express controllers
* Three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers (eTSECs)
* TCP/IP acceleration and classification capabilities
* IEEE 1588 support
* Lossless flow control
* RGMII, SGMII
* DDR3 with support for a 32-bit data interface (40 bits including ECC),
  up to 800 MHz data rate 32/16-bit DDR3 memory controller
* Dedicated security engine featuring trusted boot
* TDM interface
* Dual controller area networks (FlexCAN) controller
* SD/MMC card controller supporting booting from Flash cards
* USB 2.0 host and device controller with an on-chip, high-speed PHY
* Integrated Flash controller (IFC)
* Power Management Controller (PMC)
* Four-channel, general-purpose DMA controller
* I2C controller
* Serial peripheral interface (SPI) controller with master and slave support
* System timers including a periodic interrupt timer, real-time clock,
  software watchdog timer, and four general-purpose timers
* Dual DUARTs

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/cpu/mpc85xx/Makefile
arch/powerpc/cpu/mpc8xxx/cpu.c
arch/powerpc/include/asm/config.h
arch/powerpc/include/asm/processor.h
drivers/misc/fsl_law.c