atl2: don't request irq on resume if netif running
If the device is suspended with the cable disconnected, then
resumed with the cable connected, dev->open is called before
resume. During resume, we request an IRQ, but the IRQ was
already assigned during dev->open, resulting in the warning
shown below.
Don't request an IRQ if the device is running.
Call Trace:
[<
c011b89a>] warn_on_slowpath+0x40/0x59
[<
c023df15>] raw_pci_read+0x4d/0x55
[<
c023dff3>] pci_read+0x1c/0x21
[<
c01bcd81>] __pci_find_next_cap_ttl+0x44/0x70
[<
c01bce86>] __pci_find_next_cap+0x1a/0x1f
[<
c01bcef9>] pci_find_capability+0x28/0x2c
[<
c01c4144>] pci_msi_check_device+0x53/0x62
[<
c01c49c2>] pci_enable_msi+0x3a/0x1cd
[<
e019f17b>] atl2_write_phy_reg+0x40/0x5f [atl2]
[<
c01061b1>] dma_generic_alloc_coherent+0x0/0xd7
[<
e019f107>] atl2_request_irq+0x15/0x49 [atl2]
[<
e01a1481>] atl2_open+0x20b/0x297 [atl2]
[<
c024a35c>] dev_open+0x62/0x91
[<
c0248b9a>] dev_change_flags+0x93/0x141
[<
c024f308>] do_setlink+0x238/0x2d5
[<
c02501b2>] rtnl_setlink+0xa9/0xbf
[<
c0297f0c>] mutex_lock+0xb/0x19
[<
c024ffa7>] rtnl_dump_ifinfo+0x0/0x69
[<
c0250109>] rtnl_setlink+0x0/0xbf
[<
c024fe42>] rtnetlink_rcv_msg+0x185/0x19f
[<
c0240fd1>] sock_rmalloc+0x23/0x57
[<
c024fcbd>] rtnetlink_rcv_msg+0x0/0x19f
[<
c0259457>] netlink_rcv_skb+0x2d/0x71
[<
c024fcb7>] rtnetlink_rcv+0x14/0x1a
[<
c025929e>] netlink_unicast+0x184/0x1e4
[<
c025992a>] netlink_sendmsg+0x233/0x240
[<
c023f405>] sock_sendmsg+0xb7/0xd0
[<
c0129131>] autoremove_wake_function+0x0/0x2b
[<
c0129131>] autoremove_wake_function+0x0/0x2b
[<
c0147796>] mempool_alloc+0x2d/0x9e
[<
c020c923>] scsi_pool_alloc_command+0x35/0x4f
[<
c0297f0c>] mutex_lock+0xb/0x19
[<
c028e867>] unix_stream_recvmsg+0x357/0x3e2
[<
c01b81c9>] copy_from_user+0x23/0x4f
[<
c02452ea>] verify_iovec+0x3e/0x6c
[<
c023f5ab>] sys_sendmsg+0x18d/0x1f0
[<
c023ffa8>] sys_recvmsg+0x146/0x1c8
[<
c0240016>] sys_recvmsg+0x1b4/0x1c8
[<
c0118f48>] __wake_up+0xf/0x15
[<
c02586cd>] netlink_table_ungrab+0x17/0x19
[<
c01b83ba>] copy_to_user+0x25/0x3b
[<
c023fe4a>] move_addr_to_user+0x50/0x68
[<
c0240266>] sys_getsockname+0x6f/0x9a
[<
c0240280>] sys_getsockname+0x89/0x9a
[<
c015046a>] do_wp_page+0x3ae/0x41a
[<
c0151525>] handle_mm_fault+0x4c5/0x540
[<
c02405d0>] sys_socketcall+0x176/0x1b0
[<
c010376d>] sysenter_do_call+0x12/0x21
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Jay Cliburn <jcliburn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>