[IA64] make ioremap avoid unsupported attributes

[IA64] make ioremap avoid unsupported attributes

Example memory map (from HP sx1000 with VGA enabled):
    0x00000 - 0x9FFFF supports only WB (cacheable) access
    0xA0000 - 0xBFFFF supports only UC (uncacheable) access
    0xC0000 - 0xFFFFF supports only WB (cacheable) access

pci_read_rom() indirectly uses ioremap(0xC0000) to read the shadow VGA option
ROM.  ioremap() used to default to a 16MB or 64MB UC kernel identity mapping,
which would cause an MCA when reading 0xC0000 since only WB is supported there.

X uses reads the option ROM to initialize devices.  A smaller test case is:
  # echo 1 > /sys/bus/pci/devices/0000:aa:03.0/rom
  # cp /sys/bus/pci/devices/0000:aa:03.0/rom x

To avoid this, we can use the same ioremap_page_range() strategy that most
architectures use for all ioremaps.  These page table mappings come out of the
vmalloc area.  On ia64, these are in region 5 (0xA... addresses) and typically
use 16KB or 64KB mappings instead of 16MB or 64MB mappings.  The smaller
mappings give more flexibility to use the correct attributes.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>