nvme-multipath: fix hang when disk goes live over reconnect

nvme-multipath: fix hang when disk goes live over reconnect

[ Upstream commit a4a6f3c8f61c3cfbda4998ad94596059ad7e4332 ]

nvme_mpath_init_identify() invoked from nvme_init_identify() fetches a
fresh ANA log from the ctrl.  This is essential to have an up to date
path states for both existing namespaces and for those scan_work may
discover once the ctrl is up.

This happens in the following cases:
  1) A new ctrl is being connected.
  2) An existing ctrl is successfully reconnected.
  3) An existing ctrl is being reset.

While in (1) ctrl->namespaces is empty, (2 & 3) may have namespaces, and
nvme_read_ana_log() may call nvme_update_ns_ana_state().

This result in a hang when the ANA state of an existing namespace changes
and makes the disk live: nvme_mpath_set_live() issues IO to the namespace
through the ctrl, which does NOT have IO queues yet.

See sample hang below.

Solution:
- nvme_update_ns_ana_state() to call set_live only if ctrl is live
- nvme_read_ana_log() call from nvme_mpath_init_identify()
  therefore only fetches and parses the ANA log;
  any erros in this process will fail the ctrl setup as appropriate;
- a separate function nvme_mpath_update()
  is called in nvme_start_ctrl();
  this parses the ANA log without fetching it.
  At this point the ctrl is live,
  therefore, disks can be set live normally.

Sample failure:
    nvme nvme0: starting error recovery
    nvme nvme0: Reconnecting in 10 seconds...
    block nvme0n6: no usable path - requeuing I/O
    INFO: task kworker/u8:3:312 blocked for more than 122 seconds.
          Tainted: G            E     5.14.5-1.el7.elrepo.x86_64 #1
    Workqueue: nvme-wq nvme_tcp_reconnect_ctrl_work [nvme_tcp]
    Call Trace:
     __schedule+0x2a2/0x7e0
     schedule+0x4e/0xb0
     io_schedule+0x16/0x40
     wait_on_page_bit_common+0x15c/0x3e0
     do_read_cache_page+0x1e0/0x410
     read_cache_page+0x12/0x20
     read_part_sector+0x46/0x100
     read_lba+0x121/0x240
     efi_partition+0x1d2/0x6a0
     bdev_disk_changed.part.0+0x1df/0x430
     bdev_disk_changed+0x18/0x20
     blkdev_get_whole+0x77/0xe0
     blkdev_get_by_dev+0xd2/0x3a0
     __device_add_disk+0x1ed/0x310
     device_add_disk+0x13/0x20
     nvme_mpath_set_live+0x138/0x1b0 [nvme_core]
     nvme_update_ns_ana_state+0x2b/0x30 [nvme_core]
     nvme_update_ana_state+0xca/0xe0 [nvme_core]
     nvme_parse_ana_log+0xac/0x170 [nvme_core]
     nvme_read_ana_log+0x7d/0xe0 [nvme_core]
     nvme_mpath_init_identify+0x105/0x150 [nvme_core]
     nvme_init_identify+0x2df/0x4d0 [nvme_core]
     nvme_init_ctrl_finish+0x8d/0x3b0 [nvme_core]
     nvme_tcp_setup_ctrl+0x337/0x390 [nvme_tcp]
     nvme_tcp_reconnect_ctrl_work+0x24/0x40 [nvme_tcp]
     process_one_work+0x1bd/0x360
     worker_thread+0x50/0x3d0

Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>