net: dpaa2-eth: connect to MAC before requesting the "endpoint changed" IRQ

net: dpaa2-eth: connect to MAC before requesting the "endpoint changed" IRQ

dpaa2_eth_connect_mac() is called both from dpaa2_eth_probe() and from
dpni_irq0_handler_thread().

It could happen that the DPNI gets connected to a DPMAC on the fsl-mc
bus exactly during probe, as soon as the "endpoint change" interrupt is
requested in dpaa2_eth_setup_irqs(). This will cause the
dpni_irq0_handler_thread() to register a phylink instance for that DPMAC.

Then, the probing function will also try to register a phylink instance
for the same DPMAC, operation which should fail (and this will fail the
probing of the driver).

Reorder dpaa2_eth_setup_irqs() and dpaa2_eth_connect_mac(), such that
dpni_irq0_handler_thread() never races with the DPMAC-related portion of
the probing path.

Also reorder dpaa2_eth_disconnect_mac() to be in the mirror position of
dpaa2_eth_connect_mac() in the teardown path.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>