Added support for HiFiBerry DAC+
authorDaniel Matuschek <info@crazy-audio.com>
Mon, 4 Aug 2014 08:06:56 +0000 (10:06 +0200)
committerpopcornmix <popcornmix@gmail.com>
Mon, 13 May 2019 23:07:56 +0000 (00:07 +0100)
commit541743a5f262c2fb2651ea2e7ac652d99f0cf124
tree7a7eeb424b5d59956904d77c2046fae7fee2497d
parentb05ef7478accf7345588c1c35a0fb3416da45b03
Added support for HiFiBerry DAC+

The driver is based on the HiFiBerry DAC driver. However HiFiBerry DAC+ uses
a different codec chip (PCM5122), therefore a new driver is necessary.

Add support for the HiFiBerry DAC+ Pro.

The HiFiBerry DAC+ and DAC+ Pro products both use the existing bcm sound driver with the DAC+ Pro having a special clock device driver representing the two high precision oscillators.

An addition bug fix is included for the PCM512x codec where by the physical size of the sample frame is used in the calculation of the LRCK divisor as it was found to be wrong when using 24-bit depth sample contained in a little endian 4-byte sample frame.

Limit PCM512x "Digital" gain to 0dB by default with HiFiBerry DAC+

24db_digital_gain DT param can be used to specify that PCM512x
codec "Digital" volume control should not be limited to 0dB gain,
and if specified will allow the full 24dB gain.

Add dt param to force HiFiBerry DAC+ Pro into slave mode

"dtoverlay=hifiberry-dacplus,slave"

Add 'slave' param to use HiFiBerry DAC+ Pro in slave mode,
with Pi as master for bit and frame clock.

Signed-off-by: DigitalDreamtime <clive.messer@digitaldreamtime.co.uk>
Fixed a bug when using 352.8kHz sample rate

Signed-off-by: Daniel Matuschek <daniel@hifiberry.com>
ASoC: pcm512x: revert downstream changes

This partially reverts commit 185ea05465aac8bf02a0d2b2f4289d42c72870b7
which was added by https://github.com/raspberrypi/linux/pull/1152

The downstream pcm512x changes caused a regression, it broke normal
use of the 24bit format with the codec, eg when using simple-audio-card.

The actual bug with 24bit playback is the incorrect usage
of physical_width in various drivers in the downstream tree
which causes 24bit data to be transmitted with 32 clock
cycles. So it's not the pcm512x that needs fixing, it's the
soundcard drivers.

Signed-off-by: Matthias Reichl <hias@horus.com>
ASoC: hifiberry_dacplus: fix S24_LE format

Remove set_bclk_ratio call so 24-bit data is transmitted in
24 bclk cycles.

Signed-off-by: Matthias Reichl <hias@horus.com>
ASoC: hifiberry_dacplus: transmit S24_LE with 64 BCLK cycles

Signed-off-by: Matthias Reichl <hias@horus.com>
drivers/clk/Makefile
drivers/clk/clk-hifiberry-dacpro.c [new file with mode: 0644]
sound/soc/bcm/hifiberry_dacplus.c [new file with mode: 0644]