ARM: kirkwood: add dreamplug (fdt) support.
authorJason Cooper <jason@lakedaemon.net>
Mon, 27 Feb 2012 16:07:13 +0000 (16:07 +0000)
committerArnd Bergmann <arnd@arndb.de>
Mon, 27 Feb 2012 16:21:40 +0000 (16:21 +0000)
commit3d468b6d6052293ad3b8538b8277077981c28286
treee07c9d6e5ded0ca2bbcd1194fa61fc1b326f5347
parentd65b4e98d7ea3038b767b70fe8be959b2913f16d
ARM: kirkwood: add dreamplug (fdt) support.

Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g.
Then, switched to SPI based NOR flash.

After talking to Arnd Bergman, chose an incremental approach to adding
devicetree support.  First, we use the dtb to tell us we are on the
dreamplug, then we gradually port over drivers.

Driver porting will start with the uart (see next patch), and progress
from there.  Possibly, spi/flash/partitions will be next.

When done, board-dt.c will no longer be dreamplug specific, and dt's can
be made for the other kirkwood boards.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arch/arm/boot/dts/kirkwood-dreamplug.dts [new file with mode: 0644]
arch/arm/boot/dts/kirkwood.dtsi [new file with mode: 0644]
arch/arm/mach-kirkwood/Kconfig
arch/arm/mach-kirkwood/Makefile
arch/arm/mach-kirkwood/Makefile.boot
arch/arm/mach-kirkwood/board-dt.c [new file with mode: 0644]