mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic

mfd: intel_soc_pmic_chtwc: Add cht_wc_model data to struct intel_soc_pmic

Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.

Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.

So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.

This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).

Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:

1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:

The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.

2. The Xiaomi Mi Pad 2:

The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.

3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:

The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>