powerpc/eeh: Fix kernel crash when passing through VF
When doing vfio passthrough a VF, the kernel will crash with following
message:
[ 442.656459] Unable to handle kernel paging request for data at address 0x00000060
[ 442.656593] Faulting instruction address: 0xc000000000038b88
[ 442.656706] Oops: Kernel access of bad area, sig: 11 [#1]
[ 442.656798] SMP NR_CPUS=1024 NUMA PowerNV
[ 442.656890] Modules linked in: vfio_pci mlx4_core nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack bnep bluetooth rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw tg3 nfsd be2net nfs_acl ses lockd ptp enclosure pps_core kvm_hv kvm_pr shpchp binfmt_misc kvm sunrpc uinput lpfc scsi_transport_fc ipr scsi_tgt [last unloaded: mlx4_core]
[ 442.658152] CPU: 40 PID: 14948 Comm: qemu-system-ppc Not tainted 3.10.42yw-pkvm+ #37
[ 442.658219] task:
c000000f7e2a9a00 ti:
c000000f6dc3c000 task.ti:
c000000f6dc3c000
[ 442.658287] NIP:
c000000000038b88 LR:
c0000000004435a8 CTR:
c000000000455bc0
[ 442.658352] REGS:
c000000f6dc3f580 TRAP: 0300 Not tainted (3.10.42yw-pkvm+)
[ 442.658419] MSR:
9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR:
28004882 XER:
20000000
[ 442.658577] CFAR:
c00000000000908c DAR:
0000000000000060 DSISR:
40000000 SOFTE: 1
GPR00:
c0000000004435a8 c000000f6dc3f800 c0000000012b1c10 c00000000da24000
GPR04:
0000000000000003 0000000000001004 00000000000015b3 000000000000ffff
GPR08:
c00000000127f5d8 0000000000000000 000000000000ffff 0000000000000000
GPR12:
c000000000068078 c00000000fdd6800 000001003c320c80 000001003c3607f0
GPR16:
0000000000000001 00000000105480c8 000000001055aaa8 000001003c31ab18
GPR20:
000001003c10fb40 000001003c360ae8 000000001063bcf0 000000001063bdb0
GPR24:
000001003c15ed70 0000000010548f40 c000001fe5514c88 c000001fe5514cb0
GPR28:
c00000000da24000 0000000000000000 c00000000da24000 0000000000000003
[ 442.659471] NIP [
c000000000038b88] .pcibios_set_pcie_reset_state+0x28/0x130
[ 442.659530] LR [
c0000000004435a8] .pci_set_pcie_reset_state+0x28/0x40
[ 442.659585] Call Trace:
[ 442.659610] [
c000000f6dc3f800] [
00000000000719e0] 0x719e0 (unreliable)
[ 442.659677] [
c000000f6dc3f880] [
c0000000004435a8] .pci_set_pcie_reset_state+0x28/0x40
[ 442.659757] [
c000000f6dc3f900] [
c000000000455bf8] .reset_fundamental+0x38/0x80
[ 442.659835] [
c000000f6dc3f980] [
c0000000004562a8] .pci_dev_specific_reset+0xa8/0xf0
[ 442.659913] [
c000000f6dc3fa00] [
c0000000004448c4] .__pci_dev_reset+0x44/0x430
[ 442.659980] [
c000000f6dc3fab0] [
c000000000444d5c] .pci_reset_function+0x7c/0xc0
[ 442.660059] [
c000000f6dc3fb30] [
d00000001c141ab8] .vfio_pci_open+0xe8/0x2b0 [vfio_pci]
[ 442.660139] [
c000000f6dc3fbd0] [
c000000000586c30] .vfio_group_fops_unl_ioctl+0x3a0/0x630
[ 442.660219] [
c000000f6dc3fc90] [
c000000000255fbc] .do_vfs_ioctl+0x4ec/0x7c0
[ 442.660286] [
c000000f6dc3fd80] [
c000000000256364] .SyS_ioctl+0xd4/0xf0
[ 442.660354] [
c000000f6dc3fe30] [
c000000000009e54] syscall_exit+0x0/0x98
[ 442.660420] Instruction dump:
[ 442.660454]
4bfffce9 4bfffee4 7c0802a6 fbc1fff0 fbe1fff8 f8010010 f821ff81 7c7e1b78
[ 442.660566]
7c9f2378 60000000 60000000 e93e02c8 <
e8690060>
2fa30000 41de00c4 2b9f0002
[ 442.660679] ---[ end trace
a64ac9546bcf0328 ]---
[ 442.660724]
The reason is current VF is not EEH enabled.
This patch introduces a macro to convert eeh_dev to eeh_pe. By doing so, it
will prevent converting with NULL pointer.
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
CC: Michael Ellerman <mpe@ellerman.id.au>
V3 -> V4:
1. move the macro definition from include/linux/pci.h to
arch/powerpc/include/asm/eeh.h
V2 -> V3:
1. rebased on 3.17-rc4
2. introduce a macro
3. use this macro in several other places
V1 -> V2:
1. code style and patch subject adjustment
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
projects / platform / kernel / linux-rpi3.git / commit