audio: update audio driver to the latest. [1/1]

audio: update audio driver to the latest. [1/1]

0504a9a audio: add clk tuning_enable/start_enable control in dts [1/1]
32dd894 audio: add lock for resampler [1/1]
2ad1050 audio: set hdmi format-check threshold by input samplerate [2/2]
953435d audio: fix TDMOUT channel map error [1/1]
9eace31 audio: auge: add lower power mode for PDM & vad [1/1]
90b9c44 audio: auge: add loopback driver [1/1]
0d736dd audio: add 10ms sleep before pdn enable [1/1]
51d1794 audio: add 10ms delay before pdn enable [1/1]
998f60b audio: disable tl1 acodec dac dapm to depop [1/1]
7b0ef35 audio: enable hw resmaple pause thd [1/1]
fcb2613 audio: TM2 bringup: enable ADC for linein [1/1]
4f4dc5a audio: TM2: bringup AMP ti5805 on ab301 [1/1]
758b24b audio: fixed kernel panic when resample is disabled [1/1]
19e844f audio: TM2 audio basic function bringup [1/1]
27c68d0 audio: add codec trigger mute for depop [1/1]
d415bb5 audio: fixed the issue of PDM 16 channel capture. [1/1]
d6e5cf5 audio: always on DDR arb [1/1]
0663274 audio: add HW resample for HDMIRX [1/1]
22f4718 audio: add param check for resample [1/1]
audio: add HW resample for HDMIRX [1/1]

PD#SWPL-6118

Problem:
No resample will cause mismatch between
input and output if they are not at same
samplerate.

Solution:
Add resample for hdmirx case

Verify:
Local tested.

Change-Id: I298e401578bf49484d6b75fd736d2a74c38508e4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: always on DDR arb [1/1]

PD#TV-3452

Problem:
Toddr stuck after a long time playback.

Solution:
For debug usage.

Verify:
No need.

Change-Id: Ibf4446148f5e028040d7d6527c7695f23f964f7c
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: fixed the issue of PDM 16 channel capture. [1/1]

PD#SWPL-5551

Problem:
cannot capture 8PDM + 8LOOPBACK.

Solution:
PDM cannot support 8PDM + 8LOOPBACK.

Verify:
s420/s400, verify pass

Change-Id: Iaf38bdcb218ebfc024666312162569cab93a76a9
Signed-off-by: Renjun Xu <renjun.xu@amlogic.com>
audio: add codec trigger mute for depop [1/1]

PD#SWPL-6944

Problem:
TV-3381
Speaker sometimes has clicking noise when playing DTV program.

Solution:
add codec trigger mute for depop

Verify:
Local verified.

Change-Id: Ib15a6b90bd3a6cdda2255afaf86daeab68ba07e2
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: TM2 audio basic function bringup [1/1]

PD#SWPL-6721

Problem:
TM2 bringup

Solution:
audio basic function bringup

Verify:
Verified on T962e2_ab311

Change-Id: Ic48ded3964ea87e40c4d683d71a50bbdc1975f91
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: fixed kernel panic when resample is disabled [1/1]

PD#SWPL-7039

Problem:
Kernel Panic when resample A is disabled

Solution:
When resample is disabled，don't init resample

Verify:
Verified on T962e2_ab311

Change-Id: Id9552ffc6be40f133b828dbded4ad3f15d177ab0
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: TM2: bringup AMP ti5805 on ab301 [1/1]

PD#SWPL-7074

Problem:
speaker doesn't work

Solution:
bringup AMP ti5805 on ab301

Verify:
Verified on T962x3_ab301

Change-Id: Icb27691b4fd5a1e54070c4a6d3d3c68cdf3a60b7
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: TM2 bringup: enable ADC for linein [1/1]

PD#SWPL-7027

Problem:
audio path AVin is on audio

Solution:
enable ADC for linein

Verify:
Verify on AB311

Change-Id: Iea1d694e0b605d62596635d85416d33f56dbbcb2
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: enable hw resmaple pause thd [1/1]

PD#TV-4638

Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.

Solution:
Enable the hw resample pause thd by default.

Verify:
TL1 X301.

Change-Id: Ib6f0924025e155eaa8ba0e3681b307f7ff56b449
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: disable tl1 acodec dac dapm to depop [1/1]

PD#TV-3933

Problem:
Tl1 acodec has pop sound when first sound appear.

Solution:
Disable the DAPM which disable/enable every time
start/stop the audio stream.

Verify:
Tl1 X301.

Change-Id: Iaaf7da125de513bd8297f6c6e41af0a42c9d25bd
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: add 10ms delay before pdn enable [1/1]

PD#SWPL-7680

Problem:
the pwn signal is self excitable

Solution:
1)add 10ms delay before pdn enable
2)set default clk for extern codec

Verify:
HW verify

Change-Id: I031b20851ee1eeb65215075fc8abe783ceddf42b
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: add 10ms sleep before pdn enable [1/1]

PD#SWPL-7680

Problem:
mdelay will pend the system

Solution:
change mdelay to usleep_range

Verify:
HW verify

Change-Id: I8452dc7b1056378dbc6b743fc43316eccbf525a5
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: auge: add loopback driver [1/1]

PD#SWPL-7240

Problem:
limit of current loopback
add loopback b for tl1
add tdmin_lb

Solution:
optimize loopback driver

Verify:
s400, u200, x301, ac200, ab301

Change-Id: I9dd4c7ad041231bb2c49513e354cfb4fb92131c4
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: auge: add lower power mode for PDM & vad [1/1]

PD#SWPL-3825

Problem:
VAD & PDM works in 24m clks for lowpower mode when in deep suspend

Solution:
support VAD & PDM in 24m sysclk, 768k dclk

Verify:
x301

Change-Id: Ic363337ee9b0eba0f890ae62b9e0cb6bb54dcd6a
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: fix TDMOUT channel map error [1/1]

PD#SWPL-6427

Problem:
ALSA tdmout buffer frequently underrun.
This will cause the tdmout channel map error.
And the other channels data go into the spk.

Solution:
1)Adjust the sequence of starting and stopping.
2)reserved frddrA for EQ/DRC module

Verify:
Test more that 1 hour and pass.
Need more stress test.

Change-Id: Ib9b6897f0b6c32652c611a8c2c367aa76b9f1e3f
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: set hdmi format-check threshold by input samplerate [2/2]

PD#SWPL-6340

Problem:
ddp audio input from hdmiin is not smooth

Solution:
set hdmiin format-check threshold by input sr

Verify:
Verified by x301.

Change-Id: Idb8ffa616c3880b1c34d61ca4e8c2917343a9ffc
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: add lock for resampler [1/1]

PD#SWPL-8134

Problem:
kernel NULL pointer for aml_resample_enable

Solution:
add lock for resampler

Verify:
Need stress test for x301

Change-Id: I1bbf5d7aeab681399c93f0cba9cc59195d3be0d6
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
audio: add clk tuning_enable/start_enable control in dts [1/1]

PD#SWPL-8306

Problem:
speaker without audio on S400. sideeffect of SWPL-7680

Solution:
add control interface in dts to enable clk tuning
and start clk before codec init

Verify:
verify on S400

Change-Id: Ic9f4e7b13b7d4ced18852346cdc7cf5f48e510dc
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
audio: add param check for resample [1/1]

PD#SWPL-7798

Problem:
Crashed when audio resample setting params
are invalid.

Solution:
Add check method if the params is invalid.

Verify:
Tl1.

Change-Id: I1e0396be8d401c0a49ff0de9fd7f160f0c8133ca
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>