Merge tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git...

Merge tag 'qcom-arm64-for-6.5-2' of https://git./linux/kernel/git/qcom/linux into soc/dt

More Qualcomm ARM64 DTS changes for v6.5

This introduces support for the Qualcomm SDX75 platform, with the IDP
reference board. On IPQ5332 the RDP474 board is added and on IPQ9574 the
RDP454 is introduced.
On SC8280XP, and hence Lenovo ThinkPad X13s, GPU support is added.

For QDU1000, SDM845, SM670, SC8180X, SM6350 and SM8550 the RSC is added
to the CPU cluster power-domain to flush sleep & wake votes as the
cluster goes down.

On IPQ5332 additional reserved-memory regions to improve post mortem
debugging. UART1 is added. The MI01.2 board is renamed RDP441 and the
RDP474 is added.

On IPQ8074 critical thermal trip points are defined.

As with IPQ5332 additional reserved-memory regions are used to improve
post mortem debugging. Thermal sensors (tsens) are added and zones
defined. The crypto engine is added, and support for the RDP454 board is
added.

Across MSM8916 and MSM8939 pinctrl state definitions are cleaned up and
the purpose of msm8939-pm8916 is documented. MSM8939 has regulator
definitions cleaned up, following to the previous effort on MSM8916.

CPU Bus Fabric scaling support is added to MSM8996 Pro.

On QCM2290 CPU idle states are added.

For QDU1000 SDHCI is introduced and enabled on the IDP to gain eMMC
support. IMEM and PIL information regions are defined for improved post
mortem debugging.

The Qualcomm Robotics RB2 kit gets its on-board buttons described.

A few fixes are introduced for the newly merged SC8180X, in particluar
the DisplayPort blocks are moved to the MMCX power domain to avoid power
being reduced prematurely during boot.

The SC8280XP GPU is added and enabled for the Lenovo Thinkpad X13s,
and resets for the soundwire controllers are added. The OUI is
specified for ethernet phys on SA8540P Ride platform, to avoid reset
issues.

Charger description is added to the PMI8998 PMIC and enabled across
OnePlus 6/6T, SHIFT SHIFT6mq and Xiaomi Pocophone F1.

On SM6350 CPU idle states and UART1 are added. And SM6375 gains GPU
clock controller and IOMMU definitions.

The Fairphone FP4 gains Bluetooth support.

SM8150 is transitioned to use 2 interconnect-cells, and the USB
interconnect path is described to ensure buses are adequately voted for.

The same changes are done for SM8250, and the resolution of the
static framebuffer on Sony Xperia 1 II and 5 II are corrected.

The USB bus paths are also added to SM8350, SM8450 and SM8550.

On SM8550 DisplayPort nodes are added, as is the PWM controller for
driving the notification LED and the RTC is enabled. For the MTP and QRD
boards, the soundcard and audio codecs are defined.

A Tegra change, related to LP855X binding changes, was accidentally
picked up and dropped again later.

A number of DeviceTree fixes identified through validation was
introduced as well. Additionally a few nodes got their default status
changed to avoid unnecessarily having to enable them (e.g. the mdp/dpu
node).

* tag 'qcom-arm64-for-6.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (94 commits)
  Revert "arm64: dts: adapt to LP855X bindings changes"
  arm64: dts: qcom: sc8280xp: Enable GPU related nodes
  arm64: dts: qcom: sc8280xp: Add GPU related nodes
  arm64: dts: qcom: msm8939-pm8916: Mark always-on regulators
  arm64: dts: qcom: msm8939: Define regulator constraints next to usage
  arm64: dts: qcom: msm8939-pm8916: Clarify purpose
  arm64: dts: qcom: msm8939: Fix regulator constraints
  arm64: dts: qcom: msm8939-sony-tulip: Allow disabling pm8916_l6
  arm64: dts: qcom: msm8939-sony-tulip: Fix l10-l12 regulator voltages
  arm64: dts: qcom: msm8939: Disable lpass_codec by default
  arm64: dts: qcom: msm8939-pm8916: Add missing pm8916_codec supplies
  arm64: dts: qcom: qrb4210-rb2: Enable on-board buttons
  arm64: dts: qcom: msm8916: Drop msm8916-pins.dtsi
  arm64: dts: qcom: msm8916/39: Rename wcnss pinctrl
  arm64: dts: qcom: msm8916/39: Cleanup audio pinctrl
  arm64: dts: qcom: apq8016-sbc: Drop unneeded MCLK pinctrl
  arm64: dts: qcom: msm8916/39: Consolidate SDC pinctrl
  arm64: dts: qcom: msm8916/39: Fix SD card detect pinctrl
  arm64: dts: qcom: msm8996: rename labels for HDMI nodes
  arm64: dts: qcom: sm8250: rename labels for DSI nodes
  ...

Link: https://lore.kernel.org/r/20230615162043.1461624-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>