imx:mx6sxsabresd fix pfuz probe failed
authorPeng Fan <Peng.Fan@freescale.com>
Fri, 31 Oct 2014 03:08:06 +0000 (11:08 +0800)
committerStefano Babic <sbabic@denx.de>
Thu, 20 Nov 2014 09:13:53 +0000 (10:13 +0100)
commit05095535f6cab041a8c3007f6feae095a497bb92
treedfcba243c1424fbb773ca647fd6f1716b73f4553
parent7a139959d0de14a7efd0fe12b49b18e939468525
imx:mx6sxsabresd fix pfuz probe failed

The PFUZ probe failed with the following msg:
" wait_for_sr_state: failed sr=81 cr=a0 state=2020
  i2c_init_transfer: failed for chip 0x8 retry=0
  wait_for_sr_state: failed sr=81 cr=a0 state=2020
  i2c_init_transfer: failed for chip 0x8 retry=1
  wait_for_sr_state: failed sr=81 cr=a0 state=2020
  i2c_init_transfer: failed for chip 0x8 retry=2
  i2c_init_transfer: give up i2c_regs=021a0000
  Can't find PMIC:PFUZE100 "

board_early_init_f is too early to call i2c related setting, because
init_func_i2c is called after board_early_init_f being invoked. Thus
move setup_i2c into board_init.

Also PFUZ is connected to I2C bus 0, so change "1" -> "0".

Using this patch PFUZ can be correctly probed:
"PMIC:  PFUZE100 ID=0x11"

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
board/freescale/mx6sxsabresd/mx6sxsabresd.c