X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=src%2Fcryptsetup.c;h=09d7510680aeb9b6ae3512839970364f481f4181;hb=b684fffdaf0ba1adf6a2656bbea8f24da8c58255;hp=f2dc0a8ff44a58061c09773c1b7ab8d1c791b42f;hpb=7b42e0b99ca910b08a367533fb68a954e16ff20f;p=platform%2Fupstream%2Fcryptsetup.git diff --git a/src/cryptsetup.c b/src/cryptsetup.c index f2dc0a8..09d7510 100644 --- a/src/cryptsetup.c +++ b/src/cryptsetup.c @@ -1,3 +1,24 @@ +/* + * cryptsetup - setup cryptographic volumes for dm-crypt + * + * Copyright (C) 2004, Christophe Saout + * Copyright (C) 2004-2007, Clemens Fruhwirth + * Copyright (C) 2009-2012, Red Hat, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + #include #include #include @@ -6,32 +27,35 @@ #include #include #include +#include +#include #include #include - -#include +#include #include -#include "../config.h" - #include "cryptsetup.h" static int opt_verbose = 0; static int opt_debug = 0; -static char *opt_cipher = NULL; -static char *opt_hash = NULL; +static const char *opt_cipher = NULL; +static const char *opt_hash = NULL; static int opt_verify_passphrase = 0; -static char *opt_key_file = NULL; -static char *opt_master_key_file = NULL; -static char *opt_header_backup_file = NULL; -static char *opt_uuid = NULL; -static unsigned int opt_key_size = 0; -static unsigned int opt_keyfile_size = 0; -static unsigned int opt_new_keyfile_size = 0; +static const char *opt_key_file = NULL; +static const char *opt_master_key_file = NULL; +static const char *opt_header_backup_file = NULL; +static const char *opt_uuid = NULL; +static const char *opt_header_device = NULL; +static int opt_key_size = 0; +static long opt_keyfile_size = 0; +static long opt_new_keyfile_size = 0; +static long opt_keyfile_offset = 0; +static long opt_new_keyfile_offset = 0; static int opt_key_slot = CRYPT_ANY_SLOT; static uint64_t opt_size = 0; static uint64_t opt_offset = 0; static uint64_t opt_skip = 0; +static int opt_skip_valid = 0; static int opt_readonly = 0; static int opt_iteration_time = 1000; static int opt_batch_mode = 0; @@ -41,6 +65,10 @@ static int opt_tries = 3; static int opt_align_payload = 0; static int opt_random = 0; static int opt_urandom = 0; +static int opt_dump_master_key = 0; +static int opt_shared = 0; +static int opt_allow_discards = 0; +static int opt_test_passphrase = 0; static const char **action_argv; static int action_argc; @@ -52,9 +80,9 @@ static int action_status(int arg); static int action_luksFormat(int arg); static int action_luksOpen(int arg); static int action_luksAddKey(int arg); -static int action_luksDelKey(int arg); static int action_luksKillSlot(int arg); static int action_luksRemoveKey(int arg); +static int action_luksChangeKey(int arg); static int action_isLuks(int arg); static int action_luksUUID(int arg); static int action_luksDump(int arg); @@ -62,6 +90,8 @@ static int action_luksSuspend(int arg); static int action_luksResume(int arg); static int action_luksBackup(int arg); static int action_luksRestore(int arg); +static int action_loopaesOpen(int arg); +static int action_luksRepair(int arg); static struct action_type { const char *type; @@ -76,22 +106,27 @@ static struct action_type { { "remove", action_remove, 0, 1, 1, N_(""), N_("remove device") }, { "resize", action_resize, 0, 1, 1, N_(""), N_("resize active device") }, { "status", action_status, 0, 1, 0, N_(""), N_("show device status") }, + { "repair", action_luksRepair, 0, 1, 1, N_(""), N_("try to repair on-disk metadata") }, { "luksFormat", action_luksFormat, 0, 1, 1, N_(" []"), N_("formats a LUKS device") }, { "luksOpen", action_luksOpen, 0, 2, 1, N_(" "), N_("open LUKS device as mapping ") }, { "luksAddKey", action_luksAddKey, 0, 1, 1, N_(" []"), N_("add key to LUKS device") }, { "luksRemoveKey",action_luksRemoveKey, 0, 1, 1, N_(" []"), N_("removes supplied key or key file from LUKS device") }, + { "luksChangeKey",action_luksChangeKey, 0, 1, 1, N_(" []"), N_("changes supplied key or key file of LUKS device") }, { "luksKillSlot", action_luksKillSlot, 0, 2, 1, N_(" "), N_("wipes key with number from LUKS device") }, { "luksUUID", action_luksUUID, 0, 1, 0, N_(""), N_("print UUID of LUKS device") }, { "isLuks", action_isLuks, 0, 1, 0, N_(""), N_("tests for LUKS partition header") }, { "luksClose", action_remove, 0, 1, 1, N_(""), N_("remove LUKS mapping") }, - { "luksDump", action_luksDump, 0, 1, 0, N_(""), N_("dump LUKS partition information") }, + { "luksDump", action_luksDump, 0, 1, 1, N_(""), N_("dump LUKS partition information") }, { "luksSuspend",action_luksSuspend, 0, 1, 1, N_(""), N_("Suspend LUKS device and wipe key (all IOs are frozen).") }, { "luksResume", action_luksResume, 0, 1, 1, N_(""), N_("Resume suspended LUKS device.") }, { "luksHeaderBackup",action_luksBackup, 0, 1, 1, N_(""), N_("Backup LUKS device header and keyslots") }, { "luksHeaderRestore",action_luksRestore,0,1, 1, N_(""), N_("Restore LUKS device header and keyslots") }, + { "loopaesOpen",action_loopaesOpen, 0, 2, 1, N_(" "), N_("open loop-AES device as mapping ") }, + { "loopaesClose",action_remove, 0, 1, 1, N_(""), N_("remove loop-AES mapping") }, { NULL, NULL, 0, 0, 0, NULL, NULL } }; +__attribute__((format(printf, 5, 6))) static void clogger(struct crypt_device *cd, int level, const char *file, int line, const char *format, ...) { @@ -116,14 +151,13 @@ static void clogger(struct crypt_device *cd, int level, const char *file, free(target); } -/* Interface Callbacks */ -static int yesDialog(char *msg) +static int _yesDialog(const char *msg, void *usrptr __attribute__((unused))) { char *answer = NULL; size_t size = 0; int r = 1; - if(isatty(0) && !opt_batch_mode) { + if(isatty(STDIN_FILENO) && !opt_batch_mode) { log_std("\nWARNING!\n========\n"); log_std("%s\n\nAre you sure? (Type uppercase yes): ", msg); if(getline(&answer, &size, stdin) == -1) { @@ -139,7 +173,8 @@ static int yesDialog(char *msg) return r; } -static void cmdLineLog(int level, char *msg) { +static void _log(int level, const char *msg, void *usrptr __attribute__((unused))) +{ switch(level) { case CRYPT_LOG_NORMAL: @@ -152,39 +187,41 @@ static void cmdLineLog(int level, char *msg) { case CRYPT_LOG_ERROR: fputs(msg, stderr); break; + case CRYPT_LOG_DEBUG: + if (opt_debug) + printf("# %s\n", msg); + break; default: fprintf(stderr, "Internal error on logging class for msg: %s", msg); break; } } -static struct interface_callbacks cmd_icb = { - .yesDialog = yesDialog, - .log = cmdLineLog, -}; - -static void _log(int level, const char *msg, void *usrptr) +static void _quiet_log(int level, const char *msg, void *usrptr) { - cmdLineLog(level, (char *)msg); + if (!opt_verbose && (level == CRYPT_LOG_ERROR || level == CRYPT_LOG_NORMAL)) + level = CRYPT_LOG_VERBOSE; + _log(level, msg, usrptr); } -static int _yesDialog(const char *msg, void *usrptr) -{ - return yesDialog((char*)msg); -} - -/* End ICBs */ - -static int check_slot(int key_slot) +static int _verify_passphrase(int def) { - /* FIXME: use per format define here */ - if (key_slot != CRYPT_ANY_SLOT && (key_slot < 0 || key_slot > 8)) - return 0; + /* Batch mode switch off verify - if not overrided by -y */ + if (opt_verify_passphrase) + def = 1; + else if (opt_batch_mode) + def = 0; + + /* Non-tty input doesn't allow verify */ + if (def && !isatty(STDIN_FILENO)) { + if (opt_verify_passphrase) + log_err(_("Can't do passphrase verification on non-tty inputs.\n")); + def = 0; + } - return 1; + return def; } - static void show_status(int errcode) { char error[256], *error_; @@ -214,87 +251,247 @@ static void show_status(int errcode) log_err(".\n"); } -static int action_create(int arg) +static const char *uuid_or_device(const char *spec) +{ + static char device[PATH_MAX]; + char s, *ptr; + int i = 0, uuid_len = 5; + + /* Check if it is correct UUID= format */ + if (spec && !strncmp(spec, "UUID=", uuid_len)) { + strcpy(device, "/dev/disk/by-uuid/"); + ptr = &device[strlen(device)]; + i = uuid_len; + while ((s = spec[i++]) && i < PATH_MAX) { + if (!isxdigit(s) && s != '-') + return spec; /* Bail it out */ + if (isalpha(s)) + s = tolower(s); + *ptr++ = s; + } + *ptr = '\0'; + return device; + } + + return spec; +} + +static int action_create(int arg __attribute__((unused))) { - struct crypt_options options = { - .name = action_argv[0], - .device = action_argv[1], - .cipher = opt_cipher ? opt_cipher : DEFAULT_CIPHER(PLAIN), + struct crypt_device *cd = NULL; + char cipher[MAX_CIPHER_LEN], cipher_mode[MAX_CIPHER_LEN]; + struct crypt_params_plain params = { .hash = opt_hash ?: DEFAULT_PLAIN_HASH, - .key_file = opt_key_file, - .key_size = (opt_key_size ?: DEFAULT_PLAIN_KEYBITS) / 8, - .key_slot = opt_key_slot, - .flags = 0, - .size = opt_size, - .offset = opt_offset, .skip = opt_skip, - .timeout = opt_timeout, - .tries = opt_tries, - .icb = &cmd_icb, + .offset = opt_offset, + .size = opt_size, }; + char *password = NULL; + size_t passwordLen; + size_t key_size = (opt_key_size ?: DEFAULT_PLAIN_KEYBITS) / 8; + uint32_t activate_flags = 0; + int r; + + if (params.hash && !strcmp(params.hash, "plain")) + params.hash = NULL; + + /* FIXME: temporary hack */ + if (opt_key_file && strcmp(opt_key_file, "-")) + params.hash = NULL; + + if ((opt_keyfile_offset || opt_keyfile_size) && opt_key_file) + log_std(("Ignoring keyfile offset and size options, keyfile read " + "size is always the same as encryption key size.\n")); + + r = crypt_parse_name_and_mode(opt_cipher ?: DEFAULT_CIPHER(PLAIN), + cipher, NULL, cipher_mode); + if (r < 0) { + log_err("No known cipher specification pattern detected.\n"); + goto out; + } + + if ((r = crypt_init(&cd, action_argv[1]))) + goto out; + + crypt_set_timeout(cd, opt_timeout); + crypt_set_password_retry(cd, opt_tries); + + r = crypt_format(cd, CRYPT_PLAIN, + cipher, cipher_mode, + NULL, NULL, + key_size, + ¶ms); + if (r < 0) + goto out; - if (options.hash && strcmp(options.hash, "plain") == 0) - options.hash = NULL; - if (opt_verify_passphrase) - options.flags |= CRYPT_FLAG_VERIFY; if (opt_readonly) - options.flags |= CRYPT_FLAG_READONLY; + activate_flags |= CRYPT_ACTIVATE_READONLY; + + if (opt_shared) + activate_flags |= CRYPT_ACTIVATE_SHARED; + + if (opt_allow_discards) + activate_flags |= CRYPT_ACTIVATE_ALLOW_DISCARDS; + + if (opt_key_file) + /* With hashing, read the whole keyfile */ + r = crypt_activate_by_keyfile_offset(cd, action_argv[0], + CRYPT_ANY_SLOT, opt_key_file, + params.hash ? 0 : key_size, 0, + activate_flags); + else { + r = crypt_get_key(_("Enter passphrase: "), + &password, &passwordLen, + opt_keyfile_offset, opt_keyfile_size, + NULL, opt_timeout, + _verify_passphrase(0), + cd); + if (r < 0) + goto out; - return crypt_create_device(&options); + r = crypt_activate_by_passphrase(cd, action_argv[0], + CRYPT_ANY_SLOT, password, passwordLen, activate_flags); + } +out: + crypt_free(cd); + crypt_safe_free(password); + + return r; } -static int action_remove(int arg) +static int action_loopaesOpen(int arg __attribute__((unused))) { - struct crypt_options options = { - .name = action_argv[0], - .icb = &cmd_icb, + struct crypt_device *cd = NULL; + struct crypt_params_loopaes params = { + .hash = opt_hash ?: NULL, + .offset = opt_offset, + .skip = opt_skip_valid ? opt_skip : opt_offset, }; + unsigned int key_size = (opt_key_size ?: DEFAULT_LOOPAES_KEYBITS) / 8; + uint32_t activate_flags = 0; + int r; - return crypt_remove_device(&options); + if (!opt_key_file) { + log_err(_("Option --key-file is required.\n")); + return -EINVAL; + } + + if (opt_readonly) + activate_flags |= CRYPT_ACTIVATE_READONLY; + + if (opt_allow_discards) + activate_flags |= CRYPT_ACTIVATE_ALLOW_DISCARDS; + + if ((r = crypt_init(&cd, action_argv[0]))) + goto out; + + r = crypt_format(cd, CRYPT_LOOPAES, opt_cipher ?: DEFAULT_LOOPAES_CIPHER, + NULL, NULL, NULL, key_size, ¶ms); + if (r < 0) + goto out; + + r = crypt_activate_by_keyfile_offset(cd, action_argv[1], CRYPT_ANY_SLOT, + opt_key_file, opt_keyfile_size, + opt_keyfile_size, activate_flags); +out: + crypt_free(cd); + + return r; } -static int action_resize(int arg) +static int action_remove(int arg __attribute__((unused))) { - struct crypt_options options = { - .name = action_argv[0], - .size = opt_size, - .icb = &cmd_icb, - }; + struct crypt_device *cd = NULL; + int r; + + r = crypt_init_by_name(&cd, action_argv[0]); + if (r == 0) + r = crypt_deactivate(cd, action_argv[0]); - return crypt_resize_device(&options); + crypt_free(cd); + return r; } -static int action_status(int arg) +static int action_resize(int arg __attribute__((unused))) { - struct crypt_options options = { - .name = action_argv[0], - .icb = &cmd_icb, - }; + struct crypt_device *cd = NULL; int r; - r = crypt_query_device(&options); - if (r < 0) - return r; + r = crypt_init_by_name_and_header(&cd, action_argv[0], opt_header_device); + if (r == 0) + r = crypt_resize(cd, action_argv[0], opt_size); - if (r == 0) { - /* inactive */ - log_std("%s/%s is inactive.\n", crypt_get_dir(), options.name); - r = 1; - } else { - /* active */ - log_std("%s/%s is active:\n", crypt_get_dir(), options.name); - log_std(" cipher: %s\n", options.cipher); - log_std(" keysize: %d bits\n", options.key_size * 8); - log_std(" device: %s\n", options.device ?: ""); - log_std(" offset: %" PRIu64 " sectors\n", options.offset); - log_std(" size: %" PRIu64 " sectors\n", options.size); - if (options.skip) - log_std(" skipped: %" PRIu64 " sectors\n", options.skip); - log_std(" mode: %s\n", (options.flags & CRYPT_FLAG_READONLY) - ? "readonly" : "read/write"); - crypt_put_options(&options); - r = 0; + crypt_free(cd); + return r; +} + +static int action_status(int arg __attribute__((unused))) +{ + crypt_status_info ci; + struct crypt_active_device cad; + struct crypt_device *cd = NULL; + struct stat st; + char *backing_file; + const char *device; + int path = 0, r = 0; + + /* perhaps a path, not a dm device name */ + if (strchr(action_argv[0], '/') && !stat(action_argv[0], &st)) + path = 1; + + ci = crypt_status(NULL, action_argv[0]); + switch (ci) { + case CRYPT_INVALID: + r = -EINVAL; + break; + case CRYPT_INACTIVE: + if (path) + log_std("%s is inactive.\n", action_argv[0]); + else + log_std("%s/%s is inactive.\n", crypt_get_dir(), action_argv[0]); + r = -ENODEV; + break; + case CRYPT_ACTIVE: + case CRYPT_BUSY: + if (path) + log_std("%s is active%s.\n", action_argv[0], + ci == CRYPT_BUSY ? " and is in use" : ""); + else + log_std("%s/%s is active%s.\n", crypt_get_dir(), action_argv[0], + ci == CRYPT_BUSY ? " and is in use" : ""); + + r = crypt_init_by_name_and_header(&cd, action_argv[0], opt_header_device); + if (r < 0 || !crypt_get_type(cd)) + goto out; + + log_std(" type: %s\n", crypt_get_type(cd)); + + r = crypt_get_active_device(cd, action_argv[0], &cad); + if (r < 0) + goto out; + + log_std(" cipher: %s-%s\n", crypt_get_cipher(cd), crypt_get_cipher_mode(cd)); + log_std(" keysize: %d bits\n", crypt_get_volume_key_size(cd) * 8); + device = crypt_get_device_name(cd); + log_std(" device: %s\n", device); + if (crypt_loop_device(device)) { + backing_file = crypt_loop_backing_file(device); + log_std(" loop: %s\n", backing_file); + free(backing_file); + } + log_std(" offset: %" PRIu64 " sectors\n", cad.offset); + log_std(" size: %" PRIu64 " sectors\n", cad.size); + if (cad.iv_offset) + log_std(" skipped: %" PRIu64 " sectors\n", cad.iv_offset); + log_std(" mode: %s\n", cad.flags & CRYPT_ACTIVATE_READONLY ? + "readonly" : "read/write"); + if (cad.flags & CRYPT_ACTIVATE_ALLOW_DISCARDS) + log_std(" flags: discards\n"); } +out: + crypt_free(cd); + if (r == -ENOTSUP) + r = 0; return r; } @@ -324,66 +521,87 @@ fail: return -EINVAL; } -static int action_luksFormat(int arg) +static int action_luksRepair(int arg __attribute__((unused))) +{ + struct crypt_device *cd = NULL; + int r; + + if ((r = crypt_init(&cd, action_argv[0]))) + goto out; + + /* Currently only LUKS1 allows repair */ + crypt_set_log_callback(cd, _quiet_log, NULL); + r = crypt_load(cd, CRYPT_LUKS1, NULL); + crypt_set_log_callback(cd, _log, NULL); + if (r == 0) { + log_verbose( _("No known problems detected for LUKS header.\n")); + goto out; + } + + r = _yesDialog(_("Really try to repair LUKS device header?"), + NULL) ? 0 : -EINVAL; + if (r == 0) + r = crypt_repair(cd, CRYPT_LUKS1, NULL); +out: + crypt_free(cd); + return r; +} + +static int action_luksFormat(int arg __attribute__((unused))) { int r = -EINVAL, keysize; + const char *header_device; char *msg = NULL, *key = NULL, cipher [MAX_CIPHER_LEN], cipher_mode[MAX_CIPHER_LEN]; - const char *key_file = NULL; char *password = NULL; - unsigned int passwordLen; + size_t passwordLen; struct crypt_device *cd = NULL; struct crypt_params_luks1 params = { .hash = opt_hash ?: DEFAULT_LUKS1_HASH, .data_alignment = opt_align_payload, + .data_device = opt_header_device ? action_argv[0] : NULL, }; - if (action_argc > 1) { - key_file = action_argv[1]; - if (opt_key_file) - log_err(_("Option --key-file takes precedence over specified key file argument.\n")); - } else - key_file = opt_key_file; + header_device = opt_header_device ?: action_argv[0]; - if(asprintf(&msg, _("This will overwrite data on %s irrevocably."), action_argv[0]) == -1) { + if(asprintf(&msg, _("This will overwrite data on %s irrevocably."), + header_device) == -1) { log_err(_("memory allocation error in action_luksFormat")); r = -ENOMEM; goto out; } - r = yesDialog(msg) ? 0 : -EINVAL; + r = _yesDialog(msg, NULL) ? 0 : -EINVAL; free(msg); if (r < 0) goto out; r = crypt_parse_name_and_mode(opt_cipher ?: DEFAULT_CIPHER(LUKS1), - cipher, cipher_mode); + cipher, NULL, cipher_mode); if (r < 0) { - log_err("No known cipher specification pattern detected.\n"); + log_err(_("No known cipher specification pattern detected.\n")); goto out; } - if ((r = crypt_init(&cd, action_argv[0]))) + if ((r = crypt_init(&cd, header_device))) { + if (opt_header_device) + log_err(_("Cannot use %s as on-disk header.\n"), header_device); goto out; + } keysize = (opt_key_size ?: DEFAULT_LUKS1_KEYBITS) / 8; - crypt_set_password_verify(cd, 1); crypt_set_timeout(cd, opt_timeout); if (opt_iteration_time) - crypt_set_iterarion_time(cd, opt_iteration_time); + crypt_set_iteration_time(cd, opt_iteration_time); if (opt_random) crypt_set_rng_type(cd, CRYPT_RNG_RANDOM); else if (opt_urandom) crypt_set_rng_type(cd, CRYPT_RNG_URANDOM); - r = -EINVAL; - crypt_get_key(_("Enter LUKS passphrase: "), - &password, &passwordLen, - opt_keyfile_size, key_file, - opt_timeout, - opt_batch_mode ? 0 : 1, /* always verify */ - cd); - if(!password) + r = crypt_get_key(_("Enter LUKS passphrase: "), &password, &passwordLen, + opt_keyfile_offset, opt_keyfile_size, opt_key_file, + opt_timeout, _verify_passphrase(1), cd); + if (r < 0) goto out; if (opt_master_key_file) { @@ -405,79 +623,219 @@ out: crypt_safe_free(key); crypt_safe_free(password); - return (r < 0) ? r : 0; + return r; } -static int action_luksOpen(int arg) +static int action_luksOpen(int arg __attribute__((unused))) { struct crypt_device *cd = NULL; + const char *data_device, *header_device, *activated_name; + char *key = NULL; uint32_t flags = 0; - int r; + int r, keysize; - if ((r = crypt_init(&cd, action_argv[0]))) + if (opt_header_device) { + header_device = uuid_or_device(opt_header_device); + data_device = action_argv[0]; + } else { + header_device = uuid_or_device(action_argv[0]); + data_device = NULL; + } + + activated_name = opt_test_passphrase ? NULL : action_argv[1]; + + if ((r = crypt_init(&cd, header_device))) goto out; if ((r = crypt_load(cd, CRYPT_LUKS1, NULL))) goto out; + if (data_device && + (r = crypt_set_data_device(cd, data_device))) + goto out; + + if (!data_device && (crypt_get_data_offset(cd) < 8)) { + log_err(_("Reduced data offset is allowed only for detached LUKS header.\n")); + r = -EINVAL; + goto out; + } + crypt_set_timeout(cd, opt_timeout); crypt_set_password_retry(cd, opt_tries); + crypt_set_password_verify(cd, _verify_passphrase(0)); if (opt_iteration_time) - crypt_set_iterarion_time(cd, opt_iteration_time); + crypt_set_iteration_time(cd, opt_iteration_time); + if (opt_readonly) flags |= CRYPT_ACTIVATE_READONLY; - if (opt_key_file) { + if (opt_allow_discards) + flags |= CRYPT_ACTIVATE_ALLOW_DISCARDS; + + if (opt_master_key_file) { + keysize = crypt_get_volume_key_size(cd); + r = _read_mk(opt_master_key_file, &key, keysize); + if (r < 0) + goto out; + r = crypt_activate_by_volume_key(cd, activated_name, + key, keysize, flags); + } else if (opt_key_file) { crypt_set_password_retry(cd, 1); - r = crypt_activate_by_keyfile(cd, action_argv[1], - CRYPT_ANY_SLOT, opt_key_file, opt_keyfile_size, - flags); + r = crypt_activate_by_keyfile_offset(cd, activated_name, + opt_key_slot, opt_key_file, opt_keyfile_size, + opt_keyfile_offset, flags); } else - r = crypt_activate_by_passphrase(cd, action_argv[1], - CRYPT_ANY_SLOT, NULL, 0, flags); + r = crypt_activate_by_passphrase(cd, activated_name, + opt_key_slot, NULL, 0, flags); out: + crypt_safe_free(key); crypt_free(cd); - return (r < 0) ? r : 0; + return r; } -/* FIXME: keyslot operation needs better get_key() implementation. Use old API for now */ -static int action_luksKillSlot(int arg) +static int verify_keyslot(struct crypt_device *cd, int key_slot, + char *msg_last, char *msg_pass, + const char *key_file, int keyfile_offset, + int keyfile_size) { - struct crypt_options options = { - .device = action_argv[0], - .key_slot = opt_key_slot, - .key_file = opt_key_file, - .timeout = opt_timeout, - .flags = !opt_batch_mode?CRYPT_FLAG_VERIFY_ON_DELKEY : 0, - .icb = &cmd_icb, - }; + crypt_keyslot_info ki; + char *password = NULL; + size_t passwordLen; + int i, r; + + ki = crypt_keyslot_status(cd, key_slot); + if (ki == CRYPT_SLOT_ACTIVE_LAST && msg_last && !_yesDialog(msg_last, NULL)) + return -EPERM; + + r = crypt_get_key(msg_pass, &password, &passwordLen, + keyfile_offset, keyfile_size, key_file, opt_timeout, + _verify_passphrase(0), cd); + if(r < 0) + goto out; + + if (ki == CRYPT_SLOT_ACTIVE_LAST) { + /* check the last keyslot */ + r = crypt_activate_by_passphrase(cd, NULL, key_slot, + password, passwordLen, 0); + } else { + /* try all other keyslots */ + for (i = 0; i < crypt_keyslot_max(CRYPT_LUKS1); i++) { + if (i == key_slot) + continue; + ki = crypt_keyslot_status(cd, key_slot); + if (ki == CRYPT_SLOT_ACTIVE) + r = crypt_activate_by_passphrase(cd, NULL, i, + password, passwordLen, 0); + if (r == i) + break; + } + } - return crypt_luksKillSlot(&options); + if (r < 0) + log_err(_("No key available with this passphrase.\n")); +out: + crypt_safe_free(password); + return r; } -static int action_luksRemoveKey(int arg) +static int action_luksKillSlot(int arg __attribute__((unused))) { - struct crypt_options options = { - .device = action_argv[0], - .new_key_file = action_argc>1?action_argv[1]:NULL, - .key_file = opt_key_file, - .timeout = opt_timeout, - .flags = !opt_batch_mode?CRYPT_FLAG_VERIFY_ON_DELKEY : 0, - .icb = &cmd_icb, - }; + struct crypt_device *cd = NULL; + int r; + + if ((r = crypt_init(&cd, uuid_or_device(action_argv[0])))) + goto out; + + crypt_set_confirm_callback(cd, _yesDialog, NULL); + crypt_set_timeout(cd, opt_timeout); + + if ((r = crypt_load(cd, CRYPT_LUKS1, NULL))) + goto out; + + switch (crypt_keyslot_status(cd, opt_key_slot)) { + case CRYPT_SLOT_ACTIVE_LAST: + case CRYPT_SLOT_ACTIVE: + log_verbose(_("Key slot %d selected for deletion.\n"), opt_key_slot); + break; + case CRYPT_SLOT_INACTIVE: + log_err(_("Key %d not active. Can't wipe.\n"), opt_key_slot); + case CRYPT_SLOT_INVALID: + r = -EINVAL; + goto out; + } + + if (!opt_batch_mode) { + r = verify_keyslot(cd, opt_key_slot, + _("This is the last keyslot. Device will become unusable after purging this key."), + _("Enter any remaining LUKS passphrase: "), + opt_key_file, opt_keyfile_offset, opt_keyfile_size); + if (r < 0) + goto out; + } + + r = crypt_keyslot_destroy(cd, opt_key_slot); +out: + crypt_free(cd); + return r; +} + +static int action_luksRemoveKey(int arg __attribute__((unused))) +{ + struct crypt_device *cd = NULL; + char *password = NULL; + size_t passwordLen; + int r; + + if ((r = crypt_init(&cd, uuid_or_device(action_argv[0])))) + goto out; + + crypt_set_confirm_callback(cd, _yesDialog, NULL); + crypt_set_timeout(cd, opt_timeout); - return crypt_luksRemoveKey(&options); + if ((r = crypt_load(cd, CRYPT_LUKS1, NULL))) + goto out; + + r = crypt_get_key(_("Enter LUKS passphrase to be deleted: "), + &password, &passwordLen, + opt_keyfile_offset, opt_keyfile_size, opt_key_file, + opt_timeout, + _verify_passphrase(0), + cd); + if(r < 0) + goto out; + + r = crypt_activate_by_passphrase(cd, NULL, CRYPT_ANY_SLOT, + password, passwordLen, 0); + if (r < 0) + goto out; + + opt_key_slot = r; + log_verbose(_("Key slot %d selected for deletion.\n"), opt_key_slot); + + if (crypt_keyslot_status(cd, opt_key_slot) == CRYPT_SLOT_ACTIVE_LAST && + !_yesDialog(_("This is the last keyslot. " + "Device will become unusable after purging this key."), + NULL)) { + r = -EPERM; + goto out; + } + + r = crypt_keyslot_destroy(cd, opt_key_slot); +out: + crypt_safe_free(password); + crypt_free(cd); + return r; } -static int action_luksAddKey(int arg) +static int action_luksAddKey(int arg __attribute__((unused))) { int r = -EINVAL, keysize = 0; char *key = NULL; const char *opt_new_key_file = (action_argc > 1 ? action_argv[1] : NULL); struct crypt_device *cd = NULL; - if ((r = crypt_init(&cd, action_argv[0]))) + if ((r = crypt_init(&cd, uuid_or_device(action_argv[0])))) goto out; crypt_set_confirm_callback(cd, _yesDialog, NULL); @@ -486,21 +844,23 @@ static int action_luksAddKey(int arg) goto out; keysize = crypt_get_volume_key_size(cd); - crypt_set_password_verify(cd, opt_verify_passphrase ? 1 : 0); + /* FIXME: lib cannot properly set verification for new/old passphrase */ + crypt_set_password_verify(cd, _verify_passphrase(0)); crypt_set_timeout(cd, opt_timeout); if (opt_iteration_time) - crypt_set_iterarion_time(cd, opt_iteration_time); + crypt_set_iteration_time(cd, opt_iteration_time); if (opt_master_key_file) { - if (_read_mk(opt_master_key_file, &key, keysize) < 0) + r = _read_mk(opt_master_key_file, &key, keysize); + if (r < 0) goto out; - + //FIXME: process keyfile arg r = crypt_keyslot_add_by_volume_key(cd, opt_key_slot, key, keysize, NULL, 0); } else if (opt_key_file || opt_new_key_file) { - r = crypt_keyslot_add_by_keyfile(cd, opt_key_slot, - opt_key_file, opt_keyfile_size, - opt_new_key_file, opt_new_keyfile_size); + r = crypt_keyslot_add_by_keyfile_offset(cd, opt_key_slot, + opt_key_file, opt_keyfile_size, opt_keyfile_offset, + opt_new_key_file, opt_new_keyfile_size, opt_new_keyfile_offset); } else { r = crypt_keyslot_add_by_passphrase(cd, opt_key_slot, NULL, 0, NULL, 0); @@ -508,11 +868,108 @@ static int action_luksAddKey(int arg) out: crypt_free(cd); crypt_safe_free(key); + return r; +} + +static int _slots_full(struct crypt_device *cd) +{ + int i; + + for (i = 0; i < crypt_keyslot_max(crypt_get_type(cd)); i++) + if (crypt_keyslot_status(cd, i) == CRYPT_SLOT_INACTIVE) + return 0; + return 1; +} + +static int action_luksChangeKey(int arg __attribute__((unused))) +{ + const char *opt_new_key_file = (action_argc > 1 ? action_argv[1] : NULL); + struct crypt_device *cd = NULL; + char *vk = NULL, *password = NULL; + size_t passwordLen = 0; + size_t vk_size; + int new_key_slot, old_key_slot, r; + + if ((r = crypt_init(&cd, uuid_or_device(action_argv[0])))) + goto out; + + if ((r = crypt_load(cd, CRYPT_LUKS1, NULL))) + goto out; - return (r < 0) ? r : 0; + if (opt_iteration_time) + crypt_set_iteration_time(cd, opt_iteration_time); + + r = crypt_get_key(_("Enter LUKS passphrase to be changed: "), + &password, &passwordLen, + opt_keyfile_offset, opt_keyfile_size, opt_key_file, + opt_timeout, _verify_passphrase(0), cd); + if (r < 0) + goto out; + + vk_size = crypt_get_volume_key_size(cd); + vk = crypt_safe_alloc(vk_size); + if (!vk) { + r = -ENOMEM; + goto out; + } + + r = crypt_volume_key_get(cd, opt_key_slot, vk, &vk_size, + password, passwordLen); + if (r < 0) { + if (opt_key_slot != CRYPT_ANY_SLOT) + log_err(_("No key available with this passphrase.\n")); + goto out; + } + + if (opt_key_slot != CRYPT_ANY_SLOT || _slots_full(cd)) { + log_dbg("Key slot %d is going to be overwritten (%s).", + r, opt_key_slot != CRYPT_ANY_SLOT ? + "explicit key slot specified" : "no free key slot"); + old_key_slot = r; + new_key_slot = r; + } else { + log_dbg("Allocating new key slot."); + old_key_slot = r; + new_key_slot = CRYPT_ANY_SLOT; + } + + crypt_safe_free(password); + password = NULL; + passwordLen = 0; + r = crypt_get_key(_("Enter new LUKS passphrase: "), + &password, &passwordLen, + opt_new_keyfile_offset, opt_new_keyfile_size, + opt_new_key_file, + opt_timeout, _verify_passphrase(0), cd); + if (r < 0) + goto out; + + if (new_key_slot == old_key_slot) { + (void)crypt_keyslot_destroy(cd, old_key_slot); + r = crypt_keyslot_add_by_volume_key(cd, new_key_slot, + vk, vk_size, + password, passwordLen); + if (r >= 0) + log_verbose(_("Key slot %d changed.\n"), r); + } else { + r = crypt_keyslot_add_by_volume_key(cd, CRYPT_ANY_SLOT, + vk, vk_size, + password, passwordLen); + if (r >= 0) { + log_verbose(_("Replaced with key slot %d.\n"), r); + r = crypt_keyslot_destroy(cd, old_key_slot); + } + } + if (r < 0) + log_err(_("Failed to swap new key slot.\n")); +out: + crypt_safe_free(vk); + crypt_safe_free(password); + crypt_free(cd); + return r; } -static int action_isLuks(int arg) +static int action_isLuks(int arg __attribute__((unused))) { struct crypt_device *cd = NULL; int r; @@ -520,13 +977,14 @@ static int action_isLuks(int arg) if ((r = crypt_init(&cd, action_argv[0]))) goto out; + crypt_set_log_callback(cd, _quiet_log, NULL); r = crypt_load(cd, CRYPT_LUKS1, NULL); out: crypt_free(cd); return r; } -static int action_luksUUID(int arg) +static int action_luksUUID(int arg __attribute__((unused))) { struct crypt_device *cd = NULL; const char *existing_uuid = NULL; @@ -550,32 +1008,87 @@ static int action_luksUUID(int arg) out: crypt_free(cd); return r; +} + +static int luksDump_with_volume_key(struct crypt_device *cd) +{ + char *vk = NULL, *password = NULL; + size_t passwordLen = 0; + size_t vk_size; + unsigned i; + int r; + + crypt_set_confirm_callback(cd, _yesDialog, NULL); + if (!_yesDialog( + _("LUKS header dump with volume key is sensitive information\n" + "which allows access to encrypted partition without passphrase.\n" + "This dump should be always stored encrypted on safe place."), + NULL)) + return -EPERM; + + vk_size = crypt_get_volume_key_size(cd); + vk = crypt_safe_alloc(vk_size); + if (!vk) + return -ENOMEM; + + r = crypt_get_key(_("Enter LUKS passphrase: "), &password, &passwordLen, + opt_keyfile_offset, opt_keyfile_size, opt_key_file, + opt_timeout, 0, cd); + if (r < 0) + goto out; + + r = crypt_volume_key_get(cd, CRYPT_ANY_SLOT, vk, &vk_size, + password, passwordLen); + if (r < 0) + goto out; + + log_std("LUKS header information for %s\n", crypt_get_device_name(cd)); + log_std("Cipher name: \t%s\n", crypt_get_cipher(cd)); + log_std("Cipher mode: \t%s\n", crypt_get_cipher_mode(cd)); + log_std("Payload offset:\t%d\n", (int)crypt_get_data_offset(cd)); + log_std("UUID: \t%s\n", crypt_get_uuid(cd)); + log_std("MK bits: \t%d\n", (int)vk_size * 8); + log_std("MK dump:\t"); + + for(i = 0; i < vk_size; i++) { + if (i && !(i % 16)) + log_std("\n\t\t"); + log_std("%02hhx ", (char)vk[i]); + } + log_std("\n"); +out: + crypt_safe_free(password); + crypt_safe_free(vk); + return r; } -static int action_luksDump(int arg) +static int action_luksDump(int arg __attribute__((unused))) { struct crypt_device *cd = NULL; int r; - if ((r = crypt_init(&cd, action_argv[0]))) + if ((r = crypt_init(&cd, uuid_or_device(action_argv[0])))) goto out; if ((r = crypt_load(cd, CRYPT_LUKS1, NULL))) goto out; - r = crypt_dump(cd); + if (opt_dump_master_key) + r = luksDump_with_volume_key(cd); + else + r = crypt_dump(cd); out: crypt_free(cd); return r; } -static int action_luksSuspend(int arg) +static int action_luksSuspend(int arg __attribute__((unused))) { struct crypt_device *cd = NULL; int r; - r = crypt_init_by_name(&cd, action_argv[0]); + r = crypt_init_by_name_and_header(&cd, action_argv[0], opt_header_device); if (!r) r = crypt_suspend(cd, action_argv[0]); @@ -583,20 +1096,21 @@ static int action_luksSuspend(int arg) return r; } -static int action_luksResume(int arg) +static int action_luksResume(int arg __attribute__((unused))) { struct crypt_device *cd = NULL; int r; - if ((r = crypt_init_by_name(&cd, action_argv[0]))) + if ((r = crypt_init_by_name_and_header(&cd, action_argv[0], opt_header_device))) goto out; - if ((r = crypt_load(cd, CRYPT_LUKS1, NULL))) - goto out; + crypt_set_timeout(cd, opt_timeout); + crypt_set_password_retry(cd, opt_tries); + crypt_set_password_verify(cd, _verify_passphrase(0)); if (opt_key_file) - r = crypt_resume_by_keyfile(cd, action_argv[0], CRYPT_ANY_SLOT, - opt_key_file, opt_keyfile_size); + r = crypt_resume_by_keyfile_offset(cd, action_argv[0], CRYPT_ANY_SLOT, + opt_key_file, opt_keyfile_size, opt_keyfile_offset); else r = crypt_resume_by_passphrase(cd, action_argv[0], CRYPT_ANY_SLOT, NULL, 0); @@ -605,7 +1119,7 @@ out: return r; } -static int action_luksBackup(int arg) +static int action_luksBackup(int arg __attribute__((unused))) { struct crypt_device *cd = NULL; int r; @@ -615,7 +1129,7 @@ static int action_luksBackup(int arg) return -EINVAL; } - if ((r = crypt_init(&cd, action_argv[0]))) + if ((r = crypt_init(&cd, uuid_or_device(action_argv[0])))) goto out; crypt_set_confirm_callback(cd, _yesDialog, NULL); @@ -626,7 +1140,7 @@ out: return r; } -static int action_luksRestore(int arg) +static int action_luksRestore(int arg __attribute__((unused))) { struct crypt_device *cd = NULL; int r = 0; @@ -646,17 +1160,22 @@ out: return r; } -static void usage(poptContext popt_context, int exitcode, - const char *error, const char *more) +static __attribute__ ((noreturn)) void usage(poptContext popt_context, + int exitcode, const char *error, + const char *more) { poptPrintUsage(popt_context, stderr, 0); if (error) log_err("%s: %s\n", more, error); + poptFreeContext(popt_context); exit(exitcode); } -static void help(poptContext popt_context, enum poptCallbackReason reason, - struct poptOption *key, const char * arg, void *data) +static void help(poptContext popt_context, + enum poptCallbackReason reason __attribute__((unused)), + struct poptOption *key, + const char *arg __attribute__((unused)), + void *data __attribute__((unused))) { if (key->shortName == '?') { struct action_type *action; @@ -670,7 +1189,7 @@ static void help(poptContext popt_context, enum poptCallbackReason reason, for(action = action_types; action->type; action++) log_std("\t%s %s - %s\n", action->type, _(action->arg_desc), _(action->desc)); - + log_std(_("\n" " is the device to create under %s\n" " is the encrypted device\n" @@ -678,20 +1197,25 @@ static void help(poptContext popt_context, enum poptCallbackReason reason, " optional key file for the new key for luksAddKey action\n"), crypt_get_dir()); + log_std(_("\nDefault compiled-in keyfile parameters:\n" + "\tMaximum keyfile size: %dkB, " + "Maximum interactive passphrase length %d (characters)\n"), + DEFAULT_KEYFILE_SIZE_MAXKB, DEFAULT_PASSPHRASE_SIZE_MAX); + log_std(_("\nDefault compiled-in device cipher parameters:\n" + "\tloop-AES: %s, Key %d bits\n" "\tplain: %s, Key: %d bits, Password hashing: %s\n" "\tLUKS1: %s, Key: %d bits, LUKS header hashing: %s, RNG: %s\n"), + DEFAULT_LOOPAES_CIPHER, DEFAULT_LOOPAES_KEYBITS, DEFAULT_CIPHER(PLAIN), DEFAULT_PLAIN_KEYBITS, DEFAULT_PLAIN_HASH, DEFAULT_CIPHER(LUKS1), DEFAULT_LUKS1_KEYBITS, DEFAULT_LUKS1_HASH, DEFAULT_RNG); - exit(0); + exit(EXIT_SUCCESS); } else - usage(popt_context, 0, NULL, NULL); + usage(popt_context, EXIT_SUCCESS, NULL, NULL); } -void set_debug_level(int level); - -static void _dbg_version_and_cmd(int argc, char **argv) +static void _dbg_version_and_cmd(int argc, const char **argv) { int i; @@ -699,7 +1223,7 @@ static void _dbg_version_and_cmd(int argc, char **argv) for (i = 0; i < argc; i++) { if (i) log_std(" "); - log_std(argv[i]); + log_std("%s", argv[i]); } log_std("\"\n"); } @@ -708,6 +1232,8 @@ static int run_action(struct action_type *action) { int r; + log_dbg("Running command %s.", action->type); + if (action->required_memlock) crypt_memory_lock(NULL, 1); @@ -716,12 +1242,30 @@ static int run_action(struct action_type *action) if (action->required_memlock) crypt_memory_lock(NULL, 0); + /* Some functions returns keyslot # */ + if (r > 0) + r = 0; + show_status(r); + /* Translate exit code to simple codes */ + switch (r) { + case 0: r = EXIT_SUCCESS; break; + case -EEXIST: + case -EBUSY: r = 5; break; + case -ENOTBLK: + case -ENODEV: r = 4; break; + case -ENOMEM: r = 3; break; + case -EPERM: r = 2; break; + case -EINVAL: + case -ENOENT: + case -ENOSYS: + default: r = EXIT_FAILURE; + } return r; } -int main(int argc, char **argv) +int main(int argc, const char **argv) { static char *popt_tmp; static struct poptOption popt_help_options[] = { @@ -732,6 +1276,7 @@ int main(int argc, char **argv) }; static struct poptOption popt_options[] = { { NULL, '\0', POPT_ARG_INCLUDE_TABLE, popt_help_options, 0, N_("Help options:"), NULL }, + { "version", '\0', POPT_ARG_NONE, &opt_version_mode, 0, N_("Print package version"), NULL }, { "verbose", 'v', POPT_ARG_NONE, &opt_verbose, 0, N_("Shows more detailed error messages"), NULL }, { "debug", '\0', POPT_ARG_NONE, &opt_debug, 0, N_("Show debug messages"), NULL }, { "cipher", 'c', POPT_ARG_STRING, &opt_cipher, 0, N_("The cipher used to encrypt the disk (see /proc/crypto)"), NULL }, @@ -739,9 +1284,12 @@ int main(int argc, char **argv) { "verify-passphrase", 'y', POPT_ARG_NONE, &opt_verify_passphrase, 0, N_("Verifies the passphrase by asking for it twice"), NULL }, { "key-file", 'd', POPT_ARG_STRING, &opt_key_file, 0, N_("Read the key from a file."), NULL }, { "master-key-file", '\0', POPT_ARG_STRING, &opt_master_key_file, 0, N_("Read the volume (master) key from file."), NULL }, + { "dump-master-key", '\0', POPT_ARG_NONE, &opt_dump_master_key, 0, N_("Dump volume (master) key instead of keyslots info."), NULL }, { "key-size", 's', POPT_ARG_INT, &opt_key_size, 0, N_("The size of the encryption key"), N_("BITS") }, - { "keyfile-size", 'l', POPT_ARG_INT, &opt_keyfile_size, 0, N_("Limits the read from keyfile"), N_("bytes") }, - { "new-keyfile-size", '\0', POPT_ARG_INT, &opt_new_keyfile_size, 0, N_("Limits the read from newly added keyfile"), N_("bytes") }, + { "keyfile-size", 'l', POPT_ARG_LONG, &opt_keyfile_size, 0, N_("Limits the read from keyfile"), N_("bytes") }, + { "keyfile-offset", '\0', POPT_ARG_LONG, &opt_keyfile_offset, 0, N_("Number of bytes to skip in keyfile"), N_("bytes") }, + { "new-keyfile-size", '\0', POPT_ARG_LONG, &opt_new_keyfile_size, 0, N_("Limits the read from newly added keyfile"), N_("bytes") }, + { "new-keyfile-offset",'\0', POPT_ARG_LONG, &opt_new_keyfile_offset, 0, N_("Number of bytes to skip in newly added keyfile"), N_("bytes") }, { "key-slot", 'S', POPT_ARG_INT, &opt_key_slot, 0, N_("Slot number for new key (default is first free)"), NULL }, { "size", 'b', POPT_ARG_STRING, &popt_tmp, 1, N_("The size of the device"), N_("SECTORS") }, { "offset", 'o', POPT_ARG_STRING, &popt_tmp, 2, N_("The start offset in the backend device"), N_("SECTORS") }, @@ -749,19 +1297,22 @@ int main(int argc, char **argv) { "readonly", 'r', POPT_ARG_NONE, &opt_readonly, 0, N_("Create a readonly mapping"), NULL }, { "iter-time", 'i', POPT_ARG_INT, &opt_iteration_time, 0, N_("PBKDF2 iteration time for LUKS (in ms)"), N_("msecs") }, { "batch-mode", 'q', POPT_ARG_NONE, &opt_batch_mode, 0, N_("Do not ask for confirmation"), NULL }, - { "version", '\0', POPT_ARG_NONE, &opt_version_mode, 0, N_("Print package version"), NULL }, { "timeout", 't', POPT_ARG_INT, &opt_timeout, 0, N_("Timeout for interactive passphrase prompt (in seconds)"), N_("secs") }, { "tries", 'T', POPT_ARG_INT, &opt_tries, 0, N_("How often the input of the passphrase can be retried"), NULL }, { "align-payload", '\0', POPT_ARG_INT, &opt_align_payload, 0, N_("Align payload at sector boundaries - for luksFormat"), N_("SECTORS") }, { "header-backup-file",'\0', POPT_ARG_STRING, &opt_header_backup_file, 0, N_("File with LUKS header and keyslots backup."), NULL }, { "use-random", '\0', POPT_ARG_NONE, &opt_random, 0, N_("Use /dev/random for generating volume key."), NULL }, { "use-urandom", '\0', POPT_ARG_NONE, &opt_urandom, 0, N_("Use /dev/urandom for generating volume key."), NULL }, - { "uuid", '\0', POPT_ARG_STRING, &opt_uuid, 0, N_("UUID for device to use."), NULL }, + { "shared", '\0', POPT_ARG_NONE, &opt_shared, 0, N_("Share device with another non-overlapping crypt segment."), NULL }, + { "uuid", '\0', POPT_ARG_STRING, &opt_uuid, 0, N_("UUID for device to use."), NULL }, + { "allow-discards", '\0', POPT_ARG_NONE, &opt_allow_discards, 0, N_("Allow discards (aka TRIM) requests for device."), NULL }, + { "header", '\0', POPT_ARG_STRING, &opt_header_device, 0, N_("Device or file with separated LUKS header."), NULL }, + { "test-passphrase", '\0', POPT_ARG_NONE, &opt_test_passphrase, 0, N_("Do not activate device, just check passphrase."), NULL }, POPT_TABLEEND }; poptContext popt_context; struct action_type *action; - char *aname; + const char *aname; int r; const char *null_action_argv[] = {NULL}; @@ -771,17 +1322,21 @@ int main(int argc, char **argv) bindtextdomain(PACKAGE, LOCALEDIR); textdomain(PACKAGE); - popt_context = poptGetContext(PACKAGE, argc, (const char **)argv, - popt_options, 0); + crypt_fips_self_check(NULL); + + popt_context = poptGetContext(PACKAGE, argc, argv, popt_options, 0); poptSetOtherOptionHelp(popt_context, - N_("[OPTION...] ]")); + N_("[OPTION...] ")); while((r = poptGetNextOpt(popt_context)) > 0) { unsigned long long ull_value; char *endp; + errno = 0; ull_value = strtoull(popt_tmp, &endp, 0); - if (*endp || !*popt_tmp) + if (*endp || !*popt_tmp || + (errno == ERANGE && ull_value == ULLONG_MAX) || + (errno != 0 && ull_value == 0)) r = POPT_ERROR_BADNUMBER; switch(r) { @@ -793,6 +1348,7 @@ int main(int argc, char **argv) break; case 3: opt_skip = ull_value; + opt_skip_valid = 1; break; } @@ -801,21 +1357,22 @@ int main(int argc, char **argv) } if (r < -1) - usage(popt_context, 1, poptStrerror(r), + usage(popt_context, EXIT_FAILURE, poptStrerror(r), poptBadOption(popt_context, POPT_BADOPTION_NOALIAS)); if (opt_version_mode) { log_std("%s %s\n", PACKAGE_NAME, PACKAGE_VERSION); - exit(0); + poptFreeContext(popt_context); + exit(EXIT_SUCCESS); } - if (!(aname = (char *)poptGetArg(popt_context))) - usage(popt_context, 1, _("Argument missing."), + if (!(aname = poptGetArg(popt_context))) + usage(popt_context, EXIT_FAILURE, _("Argument missing."), poptGetInvocationName(popt_context)); for(action = action_types; action->type; action++) if (strcmp(action->type, aname) == 0) break; if (!action->type) - usage(popt_context, 1, _("Unknown action."), + usage(popt_context, EXIT_FAILURE, _("Unknown action."), poptGetInvocationName(popt_context)); action_argc = 0; @@ -831,52 +1388,100 @@ int main(int argc, char **argv) if(action_argc < action->required_action_argc) { char buf[128]; snprintf(buf, 128,_("%s: requires %s as arguments"), action->type, action->arg_desc); - usage(popt_context, 1, buf, + usage(popt_context, EXIT_FAILURE, buf, poptGetInvocationName(popt_context)); } /* FIXME: rewrite this from scratch */ + if (opt_shared && strcmp(aname, "create")) + usage(popt_context, EXIT_FAILURE, + _("Option --shared is allowed only for create operation.\n"), + poptGetInvocationName(popt_context)); + + if (opt_allow_discards && + strcmp(aname, "luksOpen") && + strcmp(aname, "create") && + strcmp(aname, "loopaesOpen")) + usage(popt_context, EXIT_FAILURE, + _("Option --allow-discards is allowed only for luksOpen, loopaesOpen and create operation.\n"), + poptGetInvocationName(popt_context)); + if (opt_key_size && strcmp(aname, "luksFormat") && - strcmp(aname, "create")) { - usage(popt_context, 1, - _("Option --key-size is allowed only for luksFormat and create.\n" + strcmp(aname, "create") && + strcmp(aname, "loopaesOpen")) + usage(popt_context, EXIT_FAILURE, + _("Option --key-size is allowed only for luksFormat, create and loopaesOpen.\n" "To limit read from keyfile use --keyfile-size=(bytes)."), poptGetInvocationName(popt_context)); - } + + if (opt_test_passphrase && + strcmp(aname, "luksOpen")) + usage(popt_context, EXIT_FAILURE, + _("Option --test-passphrase is allowed only for luksOpen.\n"), + poptGetInvocationName(popt_context)); if (opt_key_size % 8) - usage(popt_context, 1, + usage(popt_context, EXIT_FAILURE, _("Key size must be a multiple of 8 bits"), poptGetInvocationName(popt_context)); - if (!strcmp(aname, "luksKillSlot")) + if (!strcmp(aname, "luksKillSlot") && action_argc > 1) opt_key_slot = atoi(action_argv[1]); - if (!check_slot(opt_key_slot)) - usage(popt_context, 1, _("Key slot is invalid."), + if (opt_key_slot != CRYPT_ANY_SLOT && + (opt_key_slot < 0 || opt_key_slot >= crypt_keyslot_max(CRYPT_LUKS1))) + usage(popt_context, EXIT_FAILURE, _("Key slot is invalid."), + poptGetInvocationName(popt_context)); + + if ((!strcmp(aname, "luksRemoveKey") || + !strcmp(aname, "luksFormat")) && + action_argc > 1) { + if (opt_key_file) + log_err(_("Option --key-file takes precedence over specified key file argument.\n")); + else + opt_key_file = action_argv[1]; + } + + if (opt_keyfile_size < 0 || opt_new_keyfile_size < 0 || opt_key_size < 0 || + opt_keyfile_offset < 0 || opt_new_keyfile_offset < 0) + usage(popt_context, EXIT_FAILURE, + _("Negative number for option not permitted."), poptGetInvocationName(popt_context)); if (opt_random && opt_urandom) - usage(popt_context, 1, _("Only one of --use-[u]random options is allowed."), + usage(popt_context, EXIT_FAILURE, _("Only one of --use-[u]random options is allowed."), poptGetInvocationName(popt_context)); + if ((opt_random || opt_urandom) && strcmp(aname, "luksFormat")) - usage(popt_context, 1, _("Option --use-[u]random is allowed only for luksFormat."), + usage(popt_context, EXIT_FAILURE, _("Option --use-[u]random is allowed only for luksFormat."), poptGetInvocationName(popt_context)); if (opt_uuid && strcmp(aname, "luksFormat") && strcmp(aname, "luksUUID")) - usage(popt_context, 1, _("Option --uuid is allowed only for luksFormat and luksUUID."), + usage(popt_context, EXIT_FAILURE, _("Option --uuid is allowed only for luksFormat and luksUUID."), poptGetInvocationName(popt_context)); - if ((opt_offset || opt_skip) && strcmp(aname, "create")) - usage(popt_context, 1, _("Options --offset and --skip are supported only for create command.\n"), + if (opt_align_payload && strcmp(aname, "luksFormat")) + usage(popt_context, EXIT_FAILURE, _("Option --align-payload is allowed only for luksFormat."), poptGetInvocationName(popt_context)); + if (opt_skip && strcmp(aname, "create") && strcmp(aname, "loopaesOpen")) + usage(popt_context, EXIT_FAILURE, + _("Option --skip is supported only for create and loopaesOpen commands.\n"), + poptGetInvocationName(popt_context)); + + if (opt_offset && strcmp(aname, "create") && strcmp(aname, "loopaesOpen")) + usage(popt_context, EXIT_FAILURE, + _("Option --offset is supported only for create and loopaesOpen commands.\n"), + poptGetInvocationName(popt_context)); + if (opt_debug) { opt_verbose = 1; crypt_set_debug_level(-1); _dbg_version_and_cmd(argc, argv); } - return run_action(action); + r = run_action(action); + poptFreeContext(popt_context); + return r; }