X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fstatus_led.h;h=d12bb67c2c8a401091d2f5fee7886734b884ba69;hb=b77cddc7b52acd4ed78830ac681a398dd3053938;hp=47f7c355afe6f5014951bd990b3e18537e680882;hpb=8bde7f776c77b343aca29b8c7b58464d915ac245;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/status_led.h b/include/status_led.h
index 47f7c35..d12bb67 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -43,7 +43,7 @@ void status_led_tick (unsigned long timestamp);
 void status_led_set  (int led, int state);
 
 /*****  TQM8xxL  ********************************************************/
-#if defined(CONFIG_TQM8xxL)
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_HMI10)
 # define STATUS_LED_PAR		im_cpm.cp_pbpar
 # define STATUS_LED_DIR		im_cpm.cp_pbdir
 # define STATUS_LED_ODR		im_cpm.cp_pbodr
@@ -269,8 +269,8 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 0	*/
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
-/*****  KUP4K  ********************************************************/
-#elif defined(CONFIG_KUP4K)
+/*****  KUP4K, KUP4X  ****************************************************/
+#elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) || defined(CONFIG_CCM)
 
 # define STATUS_LED_PAR		im_ioport.iop_papar
 # define STATUS_LED_DIR		im_ioport.iop_padir
@@ -318,7 +318,62 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BOOT        0               /* LED 0 used for boot status */
 
+/*****  HMI10  **********************************************************/
+#elif defined(CONFIG_HMI10)
+# define STATUS_LED_PAR		im_ioport.iop_papar
+# define STATUS_LED_DIR		im_ioport.iop_padir
+# define STATUS_LED_ODR		im_ioport.iop_paodr
+# define STATUS_LED_DAT		im_ioport.iop_padat
+
+# define STATUS_LED_BIT		0x00000001	/* LED is on PA15 */
+# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
+
+# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
+
+/*****  NetPhone   ********************************************************/
+#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
+/* XXX empty just to avoid the error */
+/*****  STx XTc    ********************************************************/
+#elif defined(CONFIG_STXXTC)
+/* XXX empty just to avoid the error */
+/*****  sbc8240   ********************************************************/
+#elif defined(CONFIG_WRSBC8240)
+/* XXX empty just to avoid the error */
 /************************************************************************/
+#elif defined(CONFIG_NIOS2)
+/* XXX empty just to avoid the error */
+/************************************************************************/
+#elif defined(CONFIG_V38B)
+
+# define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
+# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
+# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
+
+#elif defined(CONFIG_MOTIONPRO)
+
+#define STATUS_LED_BIT		((vu_long *) MPC5XXX_GPT6_ENABLE)
+#define STATUS_LED_PERIOD	(CFG_HZ / 10)
+#define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+#define STATUS_LED_BIT1		((vu_long *) MPC5XXX_GPT7_ENABLE)
+#define STATUS_LED_PERIOD1	(CFG_HZ / 10)
+#define STATUS_LED_STATE1	STATUS_LED_OFF
+
+#define STATUS_LED_BOOT		0	/* LED 0 used for boot status */
+
+#elif defined(CONFIG_BOARD_SPECIFIC_LED)
+/* led_id_t is unsigned long mask */
+typedef unsigned long led_id_t;
+
+extern void __led_toggle (led_id_t mask);
+extern void __led_init (led_id_t mask, int state);
+extern void __led_set (led_id_t mask, int state);
 #else
 # error Status LED configuration missing
 #endif
@@ -328,6 +383,27 @@ void status_led_set  (int led, int state);
 # include <asm/status_led.h>
 #endif
 
+/*
+ * Coloured LEDs API
+ */
+#ifndef	__ASSEMBLY__
+extern void	coloured_LED_init (void);
+extern void	red_LED_on(void);
+extern void	red_LED_off(void);
+extern void	green_LED_on(void);
+extern void	green_LED_off(void);
+extern void	yellow_LED_on(void);
+extern void	yellow_LED_off(void);
+#else
+	.extern LED_init
+	.extern red_LED_on
+	.extern red_LED_off
+	.extern yellow_LED_on
+	.extern yellow_LED_off
+	.extern green_LED_on
+	.extern green_LED_off
+#endif
+
 #endif	/* CONFIG_STATUS_LED	*/
 
 #endif	/* _STATUS_LED_H_	*/