X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fstatus_led.h;h=396ea882eaccae038cb51cffb31dfb1b42a7ca1b;hb=68d534201733e84257e357f7ddcb379dbe1cc5d0;hp=c1d2242b9dbcc14a2d663fce373f4f902386be9e;hpb=3e1b36bd584228b0a8070c8b63351aefda652523;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/status_led.h b/include/status_led.h index c1d2242..396ea88 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -23,6 +23,7 @@ #define STATUS_LED_BLINKING 1 #define STATUS_LED_ON 2 +void status_led_init(void); void status_led_tick (unsigned long timestamp); void status_led_set (int led, int state); @@ -56,83 +57,6 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -/***** IVMS8 **********************************************************/ -#elif defined(CONFIG_IVMS8) - -# define STATUS_LED_PAR im_cpm.cp_pbpar -# define STATUS_LED_DIR im_cpm.cp_pbdir -# define STATUS_LED_ODR im_cpm.cp_pbodr -# define STATUS_LED_DAT im_cpm.cp_pbdat - -# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */ -# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE STATUS_LED_OFF -# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */ -# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE1 STATUS_LED_OFF -/* IDE LED usable for other purposes, too */ -# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */ -# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE2 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_ILOCK_SWITCH 0x00800000 /* ILOCK switch in IRQ4 */ - -# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */ - -# define STATUS_LED_YELLOW 0 -# define STATUS_LED_GREEN 1 -# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */ - -/***** IVML24 *********************************************************/ -#elif defined(CONFIG_IVML24) - -# define STATUS_LED_PAR im_cpm.cp_pbpar -# define STATUS_LED_DIR im_cpm.cp_pbdir -# define STATUS_LED_ODR im_cpm.cp_pbodr -# define STATUS_LED_DAT im_cpm.cp_pbdat - -# define STATUS_LED_BIT 0x00000010 /* LED 0 is on PB.27 */ -# define STATUS_LED_PERIOD (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE STATUS_LED_OFF -# define STATUS_LED_BIT1 0x00000020 /* LED 1 is on PB.26 */ -# define STATUS_LED_PERIOD1 (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE1 STATUS_LED_OFF -/* IDE LED usable for other purposes, too */ -# define STATUS_LED_BIT2 0x00000008 /* LED 2 is on PB.28 */ -# define STATUS_LED_PERIOD2 (1 * CONFIG_SYS_HZ) -# define STATUS_LED_STATE2 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_ILOCK_SWITCH 0x00004000 /* ILOCK is on PB.17 */ - -# define STATUS_ILOCK_PERIOD (CONFIG_SYS_HZ / 10) /* about every 100 ms */ - -# define STATUS_LED_YELLOW 0 -# define STATUS_LED_GREEN 1 -# define STATUS_LED_BOOT 2 /* IDE LED used for boot status */ - -/***** ICU862 ********************************************************/ -#elif defined(CONFIG_ICU862) - -# define STATUS_LED_PAR im_ioport.iop_papar -# define STATUS_LED_DIR im_ioport.iop_padir -# define STATUS_LED_ODR im_ioport.iop_paodr -# define STATUS_LED_DAT im_ioport.iop_padat - -# define STATUS_LED_BIT 0x4000 /* LED 0 is on PA.1 */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING -# define STATUS_LED_BIT1 0x1000 /* LED 1 is on PA.3 */ -# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ) -# define STATUS_LED_STATE1 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - /***** Someone else defines these *************************************/ #elif defined(STATUS_LED_PAR) @@ -141,58 +65,6 @@ void status_led_set (int led, int state); * filling this file up with lots of custom board stuff. */ -/***** NetVia ********************************************************/ -#elif defined(CONFIG_NETVIA) - -#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1 - -#define STATUS_LED_PAR im_ioport.iop_pdpar -#define STATUS_LED_DIR im_ioport.iop_pddir -#undef STATUS_LED_ODR -#define STATUS_LED_DAT im_ioport.iop_pddat - -# define STATUS_LED_BIT 0x0080 /* PD.8 */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_BIT1 0x0040 /* PD.9 */ -# define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE1 STATUS_LED_OFF - -# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -#endif - -/***** CMI ********************************************************/ -#elif defined(CONFIG_CMI) -# define STATUS_LED_DIR im_mios.mios_mpiosm32ddr -# define STATUS_LED_DAT im_mios.mios_mpiosm32dr - -# define STATUS_LED_BIT 0x2000 /* Select one of the 16 possible*/ - /* MIOS outputs */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* Blinking periode is 500 ms */ -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 0 */ -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - -/***** KUP4K, KUP4X ****************************************************/ -#elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) - -# define STATUS_LED_PAR im_ioport.iop_papar -# define STATUS_LED_DIR im_ioport.iop_padir -# define STATUS_LED_ODR im_ioport.iop_paodr -# define STATUS_LED_DAT im_ioport.iop_padat - -# define STATUS_LED_BIT 0x00000300 /* green + red PA[8]=yellow, PA[7]=red, PA[6]=green */ -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - #elif defined(CONFIG_V38B) # define STATUS_LED_BIT 0x0010 /* Timer7 GPIO */ @@ -221,6 +93,7 @@ typedef unsigned long led_id_t; extern void __led_toggle (led_id_t mask); extern void __led_init (led_id_t mask, int state); extern void __led_set (led_id_t mask, int state); +void __led_blink(led_id_t mask, int freq); #else # error Status LED configuration missing #endif