X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fpci.h;h=c8ef997d0de91ce0a9be21df5ece3e6d704c2c92;hb=211aaf309cde193918f9a19b0b010acebfd80a82;hp=07b1e9a4f54ace148ee72061348c203beb5e81a0;hpb=b939689c7b87773c44275a578ffc8674a867e39d;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/pci.h b/include/pci.h index 07b1e9a..c8ef997 100644 --- a/include/pci.h +++ b/include/pci.h @@ -11,6 +11,9 @@ #ifndef _PCI_H #define _PCI_H +#define PCI_CFG_SPACE_SIZE 256 +#define PCI_CFG_SPACE_EXP_SIZE 4096 + /* * Under PCI, each device has 256 bytes of configuration address space, * of which the first 64 bytes are standardized as follows: @@ -228,6 +231,8 @@ #define PCI_MIN_GNT 0x3e /* 8 bits */ #define PCI_MAX_LAT 0x3f /* 8 bits */ +#define PCI_INTERRUPT_LINE_DISABLE 0xff + /* Header type 1 (PCI-to-PCI bridges) */ #define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ #define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ @@ -413,6 +418,39 @@ #define PCI_FIND_CAP_TTL 0x48 #define CAP_START_POS 0x40 +/* Extended Capabilities (PCI-X 2.0 and Express) */ +#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) +#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) +#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) + +#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */ +#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */ +#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */ +#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */ +#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */ +#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */ +#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */ +#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */ +#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */ +#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */ +#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor-Specific */ +#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */ +#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */ +#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */ +#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */ +#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */ +#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */ +#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved for AMD */ +#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR */ +#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power Allocation */ +#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester */ +#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */ +#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */ +#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ +#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ + /* Include the ID list */ #include @@ -468,7 +506,10 @@ typedef int pci_dev_t; #define PCI_ANY_ID (~0) struct pci_device_id { - unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ + unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */ + unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ + unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ + unsigned long driver_data; /* Data private to the driver */ }; struct pci_controller; @@ -496,6 +537,8 @@ extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev /* * Structure of a PCI controller (host bridge) + * + * With driver model this is dev_get_uclass_priv(bus) */ struct pci_controller { #ifdef CONFIG_DM_PCI @@ -513,6 +556,16 @@ struct pci_controller { int indirect_type; + /* + * TODO(sjg@chromium.org): With driver model we use struct + * pci_controller for both the controller and any bridge devices + * attached to it. But there is only one region list and it is in the + * top-level controller. + * + * This could be changed so that struct pci_controller is only used + * for PCI controllers and a separate UCLASS (or perhaps + * UCLASS_PCI_GENERIC) is used for bridges. + */ struct pci_region regions[MAX_PCI_REGIONS]; int region_count; @@ -568,6 +621,7 @@ static inline void pci_set_ops(struct pci_controller *hose, extern void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data); #endif +#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) extern phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose, pci_addr_t addr, unsigned long flags); extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose, @@ -602,6 +656,7 @@ extern pci_addr_t pci_hose_phys_to_bus(struct pci_controller* hose, #define pci_io_to_virt(dev, addr, len, map_flags) \ pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags)) +/* For driver model these are defined in macros in pci_compat.c */ extern int pci_hose_read_config_byte(struct pci_controller *hose, pci_dev_t dev, int where, u8 *val); extern int pci_hose_read_config_word(struct pci_controller *hose, @@ -614,6 +669,7 @@ extern int pci_hose_write_config_word(struct pci_controller *hose, pci_dev_t dev, int where, u16 val); extern int pci_hose_write_config_dword(struct pci_controller *hose, pci_dev_t dev, int where, u32 val); +#endif #ifndef CONFIG_DM_PCI extern int pci_read_config_byte(pci_dev_t dev, int where, u8 *val); @@ -624,6 +680,13 @@ extern int pci_write_config_word(pci_dev_t dev, int where, u16 val); extern int pci_write_config_dword(pci_dev_t dev, int where, u32 val); #endif +void pciauto_region_init(struct pci_region *res); +void pciauto_region_align(struct pci_region *res, pci_size_t size); +void pciauto_config_init(struct pci_controller *hose); +int pciauto_region_allocate(struct pci_region *res, pci_size_t size, + pci_addr_t *bar); + +#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) extern int pci_hose_read_config_byte_via_dword(struct pci_controller *hose, pci_dev_t dev, int where, u8 *val); extern int pci_hose_read_config_word_via_dword(struct pci_controller *hose, @@ -637,14 +700,12 @@ extern void *pci_map_bar(pci_dev_t pdev, int bar, int flags); extern void pci_register_hose(struct pci_controller* hose); extern struct pci_controller* pci_bus_to_hose(int bus); extern struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr); +extern struct pci_controller *pci_get_hose_head(void); extern int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev); extern int pci_hose_scan(struct pci_controller *hose); extern int pci_hose_scan_bus(struct pci_controller *hose, int bus); -extern void pciauto_region_init(struct pci_region* res); -extern void pciauto_region_align(struct pci_region *res, pci_size_t size); -extern int pciauto_region_allocate(struct pci_region* res, pci_size_t size, pci_addr_t *bar); extern void pciauto_setup_device(struct pci_controller *hose, pci_dev_t dev, int bars_num, struct pci_region *mem, @@ -654,7 +715,6 @@ extern void pciauto_prescan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus); extern void pciauto_postscan_setup_bridge(struct pci_controller *hose, pci_dev_t dev, int sub_bus); -extern void pciauto_config_init(struct pci_controller *hose); extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index); @@ -674,12 +734,18 @@ extern int pci_hose_find_cap_start(struct pci_controller *hose, pci_dev_t dev, extern int pci_find_cap(struct pci_controller *hose, pci_dev_t dev, int pos, int cap); +int pci_find_next_ext_capability(struct pci_controller *hose, + pci_dev_t dev, int start, int cap); +int pci_hose_find_ext_capability(struct pci_controller *hose, + pci_dev_t dev, int cap); + #ifdef CONFIG_PCI_FIXUP_DEV extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev, unsigned short vendor, unsigned short device, unsigned short class); #endif +#endif /* !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) */ const char * pci_class_str(u8 class); int pci_last_busno(void); @@ -688,10 +754,17 @@ int pci_last_busno(void); extern void pci_mpc85xx_init (struct pci_controller *hose); #endif +#ifdef CONFIG_PCIE_IMX +extern void imx_pcie_remove(void); +#endif + +#if !defined(CONFIG_DM_PCI) || defined(CONFIG_DM_PCI_COMPAT) /** * pci_write_bar32() - Write the address of a BAR including control bits * - * This writes a raw address (with control bits) to a bar + * This writes a raw address (with control bits) to a bar. This can be used + * with devices which require hard-coded addresses, not part of the normal + * PCI enumeration process. * * @hose: PCI hose to use * @dev: PCI device to update @@ -699,7 +772,7 @@ extern void pci_mpc85xx_init (struct pci_controller *hose); * @addr: BAR address with control bits */ void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, - u32 addr_and_ctrl); + u32 addr); /** * pci_read_bar32() - read the address of a bar @@ -712,15 +785,6 @@ void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum, u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum); /** - * pciauto_setup_rom() - Set up access to a device ROM - * - * @hose: PCI hose to use - * @dev: PCI device to adjust - * @return 0 if done, -ve on error - */ -int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev); - -/** * pci_hose_find_devices() - Find devices by vendor/device ID * * @hose: PCI hose to search @@ -733,6 +797,7 @@ int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev); */ pci_dev_t pci_hose_find_devices(struct pci_controller *hose, int busnum, struct pci_device_id *ids, int *indexp); +#endif /* !CONFIG_DM_PCI || CONFIG_DM_PCI_COMPAT */ /* Access sizes for PCI reads and writes */ enum pci_size_t { @@ -749,7 +814,7 @@ struct udevice; * * Every device on a PCI bus has this per-child data. * - * It can be accessed using dev_get_parentdata(dev) if dev->parent is a + * It can be accessed using dev_get_parent_priv(dev) if dev->parent is a * PCI bus (i.e. UCLASS_PCI) * * @devfn: Encoded device and function index - see PCI_DEVFN() @@ -804,6 +869,14 @@ struct dm_pci_ops { #define pci_get_ops(dev) ((struct dm_pci_ops *)(dev)->driver->ops) /** + * dm_pci_get_bdf() - Get the BDF value for a device + * + * @dev: Device to check + * @return bus/device/function value (see PCI_BDF()) + */ +pci_dev_t dm_pci_get_bdf(struct udevice *dev); + +/** * pci_bind_bus_devices() - scan a PCI bus and bind devices * * Scan a PCI bus looking for devices. Bind each one that is found. If @@ -836,13 +909,13 @@ int pci_bind_bus_devices(struct udevice *bus); int pci_auto_config_devices(struct udevice *bus); /** - * pci_bus_find_bdf() - Find a device given its PCI bus address + * dm_pci_bus_find_bdf() - Find a device given its PCI bus address * * @bdf: PCI device address: bus, device and function -see PCI_BDF() * @devp: Returns the device for this address, if found * @return 0 if OK, -ENODEV if not found */ -int pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp); +int dm_pci_bus_find_bdf(pci_dev_t bdf, struct udevice **devp); /** * pci_bus_find_devfn() - Find a device on a bus @@ -855,6 +928,31 @@ int pci_bus_find_devfn(struct udevice *bus, pci_dev_t find_devfn, struct udevice **devp); /** + * pci_find_first_device() - return the first available PCI device + * + * This function and pci_find_first_device() allow iteration through all + * available PCI devices on all buses. Assuming there are any, this will + * return the first one. + * + * @devp: Set to the first available device, or NULL if no more are left + * or we got an error + * @return 0 if all is OK, -ve on error (e.g. a bus/bridge failed to probe) + */ +int pci_find_first_device(struct udevice **devp); + +/** + * pci_find_next_device() - return the next available PCI device + * + * Finds the next available PCI device after the one supplied, or sets @devp + * to NULL if there are no more. + * + * @devp: On entry, the last device returned. Set to the next available + * device, or NULL if no more are left or we got an error + * @return 0 if all is OK, -ve on error (e.g. a bus/bridge failed to probe) + */ +int pci_find_next_device(struct udevice **devp); + +/** * pci_get_ff() - Returns a mask for the given access size * * @size: Access size @@ -904,7 +1002,7 @@ int pci_find_device_id(struct pci_device_id *ids, int index, * @bdf: PCI bus address to scan (PCI_BUS(bdf) is the bus number) * @return 0 if OK, -ve on error */ -int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf); +int dm_pci_hose_probe_bus(struct udevice *bus); /** * pci_bus_read_config() - Read a configuration value from a device @@ -914,6 +1012,7 @@ int dm_pci_hose_probe_bus(struct pci_controller *hose, pci_dev_t bdf); * * @bus: Bus to read from * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @offset: Register offset to read * @valuep: Place to put the returned value * @size: Access size * @return 0 if OK, -ve on error @@ -926,6 +1025,7 @@ int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset, * * @bus: Bus to write from * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @offset: Register offset to write * @value: Value to write * @size: Access size * @return 0 if OK, -ve on error @@ -933,13 +1033,60 @@ int pci_bus_read_config(struct udevice *bus, pci_dev_t bdf, int offset, int pci_bus_write_config(struct udevice *bus, pci_dev_t bdf, int offset, unsigned long value, enum pci_size_t size); +/** + * pci_bus_clrset_config32() - Update a configuration value for a device + * + * The register at @offset is updated to (oldvalue & ~clr) | set. + * + * @bus: Bus to access + * @bdf: PCI device address: bus, device and function -see PCI_BDF() + * @offset: Register offset to update + * @clr: Bits to clear + * @set: Bits to set + * @return 0 if OK, -ve on error + */ +int pci_bus_clrset_config32(struct udevice *bus, pci_dev_t bdf, int offset, + u32 clr, u32 set); + +/** + * Driver model PCI config access functions. Use these in preference to others + * when you have a valid device + */ +int dm_pci_read_config(struct udevice *dev, int offset, unsigned long *valuep, + enum pci_size_t size); + +int dm_pci_read_config8(struct udevice *dev, int offset, u8 *valuep); +int dm_pci_read_config16(struct udevice *dev, int offset, u16 *valuep); +int dm_pci_read_config32(struct udevice *dev, int offset, u32 *valuep); + +int dm_pci_write_config(struct udevice *dev, int offset, unsigned long value, + enum pci_size_t size); + +int dm_pci_write_config8(struct udevice *dev, int offset, u8 value); +int dm_pci_write_config16(struct udevice *dev, int offset, u16 value); +int dm_pci_write_config32(struct udevice *dev, int offset, u32 value); + +/** + * These permit convenient read/modify/write on PCI configuration. The + * register is updated to (oldvalue & ~clr) | set. + */ +int dm_pci_clrset_config8(struct udevice *dev, int offset, u32 clr, u32 set); +int dm_pci_clrset_config16(struct udevice *dev, int offset, u32 clr, u32 set); +int dm_pci_clrset_config32(struct udevice *dev, int offset, u32 clr, u32 set); + /* * The following functions provide access to the above without needing the * size parameter. We are trying to encourage the use of the 8/16/32-style * functions, rather than byte/word/dword. But both are supported. */ int pci_write_config32(pci_dev_t pcidev, int offset, u32 value); +int pci_write_config16(pci_dev_t pcidev, int offset, u16 value); +int pci_write_config8(pci_dev_t pcidev, int offset, u8 value); +int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep); +int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep); +int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep); +#ifdef CONFIG_DM_PCI_COMPAT /* Compatibility with old naming */ static inline int pci_write_config_dword(pci_dev_t pcidev, int offset, u32 value) @@ -947,8 +1094,6 @@ static inline int pci_write_config_dword(pci_dev_t pcidev, int offset, return pci_write_config32(pcidev, offset, value); } -int pci_write_config16(pci_dev_t pcidev, int offset, u16 value); - /* Compatibility with old naming */ static inline int pci_write_config_word(pci_dev_t pcidev, int offset, u16 value) @@ -956,8 +1101,6 @@ static inline int pci_write_config_word(pci_dev_t pcidev, int offset, return pci_write_config16(pcidev, offset, value); } -int pci_write_config8(pci_dev_t pcidev, int offset, u8 value); - /* Compatibility with old naming */ static inline int pci_write_config_byte(pci_dev_t pcidev, int offset, u8 value) @@ -965,8 +1108,6 @@ static inline int pci_write_config_byte(pci_dev_t pcidev, int offset, return pci_write_config8(pcidev, offset, value); } -int pci_read_config32(pci_dev_t pcidev, int offset, u32 *valuep); - /* Compatibility with old naming */ static inline int pci_read_config_dword(pci_dev_t pcidev, int offset, u32 *valuep) @@ -974,8 +1115,6 @@ static inline int pci_read_config_dword(pci_dev_t pcidev, int offset, return pci_read_config32(pcidev, offset, valuep); } -int pci_read_config16(pci_dev_t pcidev, int offset, u16 *valuep); - /* Compatibility with old naming */ static inline int pci_read_config_word(pci_dev_t pcidev, int offset, u16 *valuep) @@ -983,14 +1122,176 @@ static inline int pci_read_config_word(pci_dev_t pcidev, int offset, return pci_read_config16(pcidev, offset, valuep); } -int pci_read_config8(pci_dev_t pcidev, int offset, u8 *valuep); - /* Compatibility with old naming */ static inline int pci_read_config_byte(pci_dev_t pcidev, int offset, u8 *valuep) { return pci_read_config8(pcidev, offset, valuep); } +#endif /* CONFIG_DM_PCI_COMPAT */ + +/** + * dm_pciauto_config_device() - configure a device ready for use + * + * Space is allocated for each PCI base address register (BAR) so that the + * devices are mapped into memory and I/O space ready for use. + * + * @dev: Device to configure + * @return 0 if OK, -ve on error + */ +int dm_pciauto_config_device(struct udevice *dev); + +/** + * pci_conv_32_to_size() - convert a 32-bit read value to the given size + * + * Some PCI buses must always perform 32-bit reads. The data must then be + * shifted and masked to reflect the required access size and offset. This + * function performs this transformation. + * + * @value: Value to transform (32-bit value read from @offset & ~3) + * @offset: Register offset that was read + * @size: Required size of the result + * @return the value that would have been obtained if the read had been + * performed at the given offset with the correct size + */ +ulong pci_conv_32_to_size(ulong value, uint offset, enum pci_size_t size); + +/** + * pci_conv_size_to_32() - update a 32-bit value to prepare for a write + * + * Some PCI buses must always perform 32-bit writes. To emulate a smaller + * write the old 32-bit data must be read, updated with the required new data + * and written back as a 32-bit value. This function performs the + * transformation from the old value to the new value. + * + * @value: Value to transform (32-bit value read from @offset & ~3) + * @offset: Register offset that should be written + * @size: Required size of the write + * @return the value that should be written as a 32-bit access to @offset & ~3. + */ +ulong pci_conv_size_to_32(ulong old, ulong value, uint offset, + enum pci_size_t size); + +/** + * pci_get_controller() - obtain the controller to use for a bus + * + * @dev: Device to check + * @return pointer to the controller device for this bus + */ +struct udevice *pci_get_controller(struct udevice *dev); + +/** + * pci_get_regions() - obtain pointers to all the region types + * + * @dev: Device to check + * @iop: Returns a pointer to the I/O region, or NULL if none + * @memp: Returns a pointer to the memory region, or NULL if none + * @prefp: Returns a pointer to the pre-fetch region, or NULL if none + * @return the number of non-NULL regions returned, normally 3 + */ +int pci_get_regions(struct udevice *dev, struct pci_region **iop, + struct pci_region **memp, struct pci_region **prefp); + +/** + * dm_pci_write_bar32() - Write the address of a BAR + * + * This writes a raw address to a bar + * + * @dev: PCI device to update + * @barnum: BAR number (0-5) + * @addr: BAR address + */ +void dm_pci_write_bar32(struct udevice *dev, int barnum, u32 addr); + +/** + * dm_pci_read_bar32() - read a base address register from a device + * + * @dev: Device to check + * @barnum: Bar number to read (numbered from 0) + * @return: value of BAR + */ +u32 dm_pci_read_bar32(struct udevice *dev, int barnum); + +/** + * dm_pci_bus_to_phys() - convert a PCI bus address to a physical address + * + * @dev: Device containing the PCI address + * @addr: PCI address to convert + * @flags: Flags for the region type (PCI_REGION_...) + * @return physical address corresponding to that PCI bus address + */ +phys_addr_t dm_pci_bus_to_phys(struct udevice *dev, pci_addr_t addr, + unsigned long flags); + +/** + * dm_pci_phys_to_bus() - convert a physical address to a PCI bus address + * + * @dev: Device containing the bus address + * @addr: Physical address to convert + * @flags: Flags for the region type (PCI_REGION_...) + * @return PCI bus address corresponding to that physical address + */ +pci_addr_t dm_pci_phys_to_bus(struct udevice *dev, phys_addr_t addr, + unsigned long flags); + +/** + * dm_pci_map_bar() - get a virtual address associated with a BAR region + * + * Looks up a base address register and finds the physical memory address + * that corresponds to it + * + * @dev: Device to check + * @bar: Bar number to read (numbered from 0) + * @flags: Flags for the region type (PCI_REGION_...) + * @return: pointer to the virtual address to use + */ +void *dm_pci_map_bar(struct udevice *dev, int bar, int flags); + +#define dm_pci_virt_to_bus(dev, addr, flags) \ + dm_pci_phys_to_bus(dev, (virt_to_phys(addr)), (flags)) +#define dm_pci_bus_to_virt(dev, addr, flags, len, map_flags) \ + map_physmem(dm_pci_bus_to_phys(dev, (addr), (flags)), \ + (len), (map_flags)) + +#define dm_pci_phys_to_mem(dev, addr) \ + dm_pci_phys_to_bus((dev), (addr), PCI_REGION_MEM) +#define dm_pci_mem_to_phys(dev, addr) \ + dm_pci_bus_to_phys((dev), (addr), PCI_REGION_MEM) +#define dm_pci_phys_to_io(dev, addr) \ + dm_pci_phys_to_bus((dev), (addr), PCI_REGION_IO) +#define dm_pci_io_to_phys(dev, addr) \ + dm_pci_bus_to_phys((dev), (addr), PCI_REGION_IO) + +#define dm_pci_virt_to_mem(dev, addr) \ + dm_pci_virt_to_bus((dev), (addr), PCI_REGION_MEM) +#define dm_pci_mem_to_virt(dev, addr, len, map_flags) \ + dm_pci_bus_to_virt((dev), (addr), PCI_REGION_MEM, (len), (map_flags)) +#define dm_pci_virt_to_io(dev, addr) \ + dm_pci_virt_to_bus((dev), (addr), PCI_REGION_IO) +#define dm_pci_io_to_virt(dev, addr, len, map_flags) \ + dm_pci_bus_to_virt((dev), (addr), PCI_REGION_IO, (len), (map_flags)) + +/** + * dm_pci_find_device() - find a device by vendor/device ID + * + * @vendor: Vendor ID + * @device: Device ID + * @index: 0 to find the first match, 1 for second, etc. + * @devp: Returns pointer to the device, if found + * @return 0 if found, -ve on error + */ +int dm_pci_find_device(unsigned int vendor, unsigned int device, int index, + struct udevice **devp); + +/** + * dm_pci_find_class() - find a device by class + * + * @find_class: 3-byte (24-bit) class value to find + * @index: 0 to find the first match, 1 for second, etc. + * @devp: Returns pointer to the device, if found + * @return 0 if found, -ve on error + */ +int dm_pci_find_class(uint find_class, int index, struct udevice **devp); /** * struct dm_pci_emul_ops - PCI device emulator operations @@ -1100,7 +1401,79 @@ struct dm_pci_emul_ops { int sandbox_pci_get_emul(struct udevice *bus, pci_dev_t find_devfn, struct udevice **emulp); -#endif +#endif /* CONFIG_DM_PCI */ + +/** + * PCI_DEVICE - macro used to describe a specific pci device + * @vend: the 16 bit PCI Vendor ID + * @dev: the 16 bit PCI Device ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific device. The subvendor and subdevice fields will be set to + * PCI_ANY_ID. + */ +#define PCI_DEVICE(vend, dev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID + +/** + * PCI_DEVICE_SUB - macro used to describe a specific pci device with subsystem + * @vend: the 16 bit PCI Vendor ID + * @dev: the 16 bit PCI Device ID + * @subvend: the 16 bit PCI Subvendor ID + * @subdev: the 16 bit PCI Subdevice ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific device with subsystem information. + */ +#define PCI_DEVICE_SUB(vend, dev, subvend, subdev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = (subvend), .subdevice = (subdev) + +/** + * PCI_DEVICE_CLASS - macro used to describe a specific pci device class + * @dev_class: the class, subclass, prog-if triple for this device + * @dev_class_mask: the class mask for this device + * + * This macro is used to create a struct pci_device_id that matches a + * specific PCI class. The vendor, device, subvendor, and subdevice + * fields will be set to PCI_ANY_ID. + */ +#define PCI_DEVICE_CLASS(dev_class, dev_class_mask) \ + .class = (dev_class), .class_mask = (dev_class_mask), \ + .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID + +/** + * PCI_VDEVICE - macro used to describe a specific pci device in short form + * @vend: the vendor name + * @dev: the 16 bit PCI Device ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific PCI device. The subvendor, and subdevice fields will be set + * to PCI_ANY_ID. The macro allows the next field to follow as the device + * private data. + */ + +#define PCI_VDEVICE(vend, dev) \ + .vendor = PCI_VENDOR_ID_##vend, .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0 + +/** + * struct pci_driver_entry - Matches a driver to its pci_device_id list + * @driver: Driver to use + * @match: List of match records for this driver, terminated by {} + */ +struct pci_driver_entry { + struct driver *driver; + const struct pci_device_id *match; +}; + +#define U_BOOT_PCI_DEVICE(__name, __match) \ + ll_entry_declare(struct pci_driver_entry, __name, pci_driver_entry) = {\ + .driver = llsym(struct driver, __name, driver), \ + .match = __match, \ + } #endif /* __ASSEMBLY__ */ #endif /* _PCI_H */