X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fmpc824x.h;h=31d6f693dafeb705f4ad06482338500b621762fe;hb=14bc66bd9a1d8073a12c6e785ab379909f620356;hp=30f01d5aa8999d69b4a70832b84566f19dc17d3f;hpb=bc2962482b707e44e0b43d20bd4dcf2a40230abb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/mpc824x.h b/include/mpc824x.h
index 30f01d5..31d6f69 100644
--- a/include/mpc824x.h
+++ b/include/mpc824x.h
@@ -2,23 +2,7 @@
  * Copyright Rob Taylor, Flying Pig Systems Ltd. 2000.
  * Copyright (C) 2001, James Dougherty, jfd@cs.stanford.edu
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __MPC824X_H__
@@ -154,7 +138,7 @@
 #define MAP_B_CONFIG_DATA_LOW	0x0000	/* Lower half of CONFIG_DAT for Map B */
 
 
-#if defined(CFG_ADDR_MAP_A)
+#if defined(CONFIG_SYS_ADDR_MAP_A)
 #define CONFIG_ADDR_HIGH    MAP_A_CONFIG_ADDR_HIGH  /* Upper half of CONFIG_ADDR */
 #define CONFIG_ADDR_LOW	    MAP_A_CONFIG_ADDR_LOW   /* Lower half of CONFIG_ADDR */
 #define CONFIG_DATA_HIGH    MAP_A_CONFIG_DATA_HIGH  /* Upper half of CONFIG_DAT */
@@ -258,7 +242,7 @@
 #define PLTR		0x8000000d  /* PCI Latancy Timer Register */
 #define PHTR		0x8000000e  /* PCI Header Type Register */
 #define BISTCTRL	0x8000000f  /* BIST Control */
-#define LMBAR		0x80000010  /* Local Base Addres Register */
+#define LMBAR		0x80000010  /* Local Base Address Register */
 #define PCSRBAR		0x80000014  /* PCSR Base Address Register */
 #define ILR		0x8000003c  /* PCI Interrupt Line Register */
 #define IPR		0x8000003d  /* Interrupt Pin Register */
@@ -451,45 +435,6 @@
 #define MICR_EADDR_MASK		0x30000000
 #define MICR_EADDR_SHIFT	28
 
-#define BATU_BEPI_MSK		0xfffe0000
-#define BATU_BL_MSK		0x00001ffc
-
-#define BATU_BL_128K		0x00000000
-#define BATU_BL_256K		0x00000004
-#define BATU_BL_512K		0x0000000c
-#define BATU_BL_1M		0x0000001c
-#define BATU_BL_2M		0x0000003c
-#define BATU_BL_4M		0x0000007c
-#define BATU_BL_8M		0x000000fc
-#define BATU_BL_16M		0x000001fc
-#define BATU_BL_32M		0x000003fc
-#define BATU_BL_64M		0x000007fc
-#define BATU_BL_128M		0x00000ffc
-#define BATU_BL_256M		0x00001ffc
-
-#define BATU_VS			0x00000002
-#define BATU_VP			0x00000001
-
-#define BATL_BRPN_MSK		0xfffe0000
-#define BATL_WIMG_MSK		0x00000078
-
-#define BATL_WRITETHROUGH	0x00000040
-#define BATL_CACHEINHIBIT	0x00000020
-#define BATL_MEMCOHERENCE	0x00000010
-#define BATL_GUARDEDSTORAGE	0x00000008
-
-#define BATL_PP_MSK		0x00000003
-#define BATL_PP_00		0x00000000 /* No access */
-#define BATL_PP_01		0x00000001 /* Read-only */
-#define BATL_PP_10		0x00000002 /* Read-write */
-#define BATL_PP_11		0x00000003
-
-/*
- * I'd attempt to do defines for the PP bits, but it's use is a bit
- * too complex, see the PowerPC Operating Environment Architecture
- * section in the PowerPc arch book, chapter 4.
- */
-
 /*eumb and epic config*/
 
 #define EPIC_FPR		0x00041000