X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fmisc.h;h=82ec2ce79368b8bcea2ff719d1a5052fdfd41e4f;hb=355d1e24f6143c4839be3c015c191421c4e9449c;hp=7e9badfabd0119f34980d4b800cb86b29ecaa8a3;hpb=2431492aef1de33bd222c97ecc131a338d9c454e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/misc.h b/include/misc.h
index 7e9badf..82ec2ce 100644
--- a/include/misc.h
+++ b/include/misc.h
@@ -1,42 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Thomas Chou <thomas@wytron.com.tw>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _MISC_H_
 #define _MISC_H_
 
-/*
- * Read the device to buffer, optional.
- *
+struct udevice;
+
+/**
+ * misc_read() - Read the device to buffer, optional.
  * @dev: the device
  * @offset: offset to read the device
  * @buf: pointer to data buffer
  * @size: data size in bytes to read the device
- * @return: 0 if OK, -ve on error
+ *
+ * Return: number of bytes read if OK (may be 0 if EOF), -ve on error
  */
 int misc_read(struct udevice *dev, int offset, void *buf, int size);
-/*
- * Write buffer to the device, optional.
- *
+
+/**
+ * misc_write() - Write buffer to the device, optional.
  * @dev: the device
  * @offset: offset to write the device
  * @buf: pointer to data buffer
  * @size: data size in bytes to write the device
- * @return: 0 if OK, -ve on error
+ *
+ * Return: number of bytes written if OK (may be < @size), -ve on error
  */
 int misc_write(struct udevice *dev, int offset, void *buf, int size);
-/*
- * Assert command to the device, optional.
- *
+
+/**
+ * misc_ioctl() - Assert command to the device, optional.
  * @dev: the device
  * @request: command to be sent to the device
- * @buf: pointer to buffer related to the requset
- * @return: 0 if OK, -ve on error
+ * @buf: pointer to buffer related to the request
+ *
+ * Return: 0 if OK, -ve on error
  */
 int misc_ioctl(struct udevice *dev, unsigned long request, void *buf);
 
+/**
+ * misc_call() - Send a message to the device and wait for a response.
+ * @dev: the device.
+ * @msgid: the message ID/number to send.
+ * @tx_msg: the request/transmit message payload.
+ * @tx_size: the size of the buffer pointed at by tx_msg.
+ * @rx_msg: the buffer to receive the response message payload. May be NULL if
+ *          the caller only cares about the error code.
+ * @rx_size: the size of the buffer pointed at by rx_msg.
+ *
+ * The caller provides the message type/ID and payload to be sent.
+ * The callee constructs any message header required, transmits it to the
+ * target, waits for a response, checks any error code in the response,
+ * strips any message header from the response, and returns the error code
+ * (or a parsed version of it) and the response message payload.
+ *
+ * Return: the response message size if OK, -ve on error
+ */
+int misc_call(struct udevice *dev, int msgid, void *tx_msg, int tx_size,
+	      void *rx_msg, int rx_size);
+
+/**
+ * misc_set_enabled() - Enable or disable a device.
+ * @dev: the device to enable or disable.
+ * @val: the flag that tells the driver to either enable or disable the device.
+ *
+ * The semantics of "disable" and "enable" should be understood here as
+ * activating or deactivating the device's primary function, hence a "disabled"
+ * device should be dormant, but still answer to commands and queries.
+ *
+ * A probed device may start in a disabled or enabled state, depending on the
+ * driver and hardware.
+ *
+ * Return: -ve on error, 0 if the previous state was "disabled", 1 if the
+ *	   previous state was "enabled"
+ */
+int misc_set_enabled(struct udevice *dev, bool val);
+
 /*
  * struct misc_ops - Driver model Misc operations
  *
@@ -44,36 +85,62 @@ int misc_ioctl(struct udevice *dev, unsigned long request, void *buf);
  * use driver model.
  */
 struct misc_ops {
-	/*
+	/**
 	 * Read the device to buffer, optional.
-	 *
 	 * @dev: the device
 	 * @offset: offset to read the device
 	 * @buf: pointer to data buffer
 	 * @size: data size in bytes to read the device
-	 * @return: 0 if OK, -ve on error
+	 *
+	 * Return: number of bytes read if OK (may be 0 if EOF), -ve on error
 	 */
 	int (*read)(struct udevice *dev, int offset, void *buf, int size);
-	/*
+
+	/**
 	 * Write buffer to the device, optional.
-	 *
 	 * @dev: the device
 	 * @offset: offset to write the device
 	 * @buf: pointer to data buffer
 	 * @size: data size in bytes to write the device
-	 * @return: 0 if OK, -ve on error
+	 *
+	 * Return: number of bytes written if OK (may be < @size), -ve on error
 	 */
 	int (*write)(struct udevice *dev, int offset, const void *buf,
 		     int size);
-	/*
+	/**
 	 * Assert command to the device, optional.
-	 *
 	 * @dev: the device
 	 * @request: command to be sent to the device
-	 * @buf: pointer to buffer related to the requset
-	 * @return: 0 if OK, -ve on error
+	 * @buf: pointer to buffer related to the request
+	 *
+	 * Return: 0 if OK, -ve on error
 	 */
 	int (*ioctl)(struct udevice *dev, unsigned long request, void *buf);
+
+	/**
+	 * Send a message to the device and wait for a response.
+	 * @dev: the device
+	 * @msgid: the message ID/number to send
+	 * @tx_msg: the request/transmit message payload
+	 * @tx_size: the size of the buffer pointed at by tx_msg
+	 * @rx_msg: the buffer to receive the response message payload. May be
+	 *          NULL if the caller only cares about the error code.
+	 * @rx_size: the size of the buffer pointed at by rx_msg
+	 *
+	 * Return: the response message size if OK, -ve on error
+	 */
+	int (*call)(struct udevice *dev, int msgid, void *tx_msg, int tx_size,
+		    void *rx_msg, int rx_size);
+	/**
+	 * Enable or disable a device, optional.
+	 * @dev: the device to enable.
+	 * @val: the flag that tells the driver to either enable or disable the
+	 *	 device.
+	 *
+	 * Return: -ve on error, 0 if the previous state was "disabled", 1 if
+	 *	   the previous state was "enabled"
+	 */
+	int (*set_enabled)(struct udevice *dev, bool val);
 };
 
 #endif	/* _MISC_H_ */