X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Flcd.h;h=0e098d925ecb053e875cc5340aebe2b07d70765e;hb=10d1a160f5e28b05f891c050ca2f23855b226f5f;hp=8a4273cce15d040af62b9221c741807104c2c7d0;hpb=b8685affe614ccf5f4ec66252b30e2e524d18948;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/lcd.h b/include/lcd.h
index 8a4273c..0e098d9 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -43,6 +43,18 @@ extern void *lcd_console_address;	/* Start of console buffer	*/
 
 extern short console_col;
 extern short console_row;
+extern struct vidinfo panel_info;
+
+extern void lcd_ctrl_init (void *lcdbase);
+extern void lcd_enable (void);
+
+/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
+extern void lcd_setcolreg (ushort regno,
+				ushort red, ushort green, ushort blue);
+extern void lcd_initcolregs (void);
+
+/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
+extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp);
 
 #if defined CONFIG_MPC823
 /*
@@ -75,9 +87,7 @@ typedef struct vidinfo {
 	u_char	vl_wbf;		/* Wait between frames */
 } vidinfo_t;
 
-extern vidinfo_t panel_info;
-
-#elif defined CONFIG_PXA250
+#elif defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS
 /*
  * PXA LCD DMA descriptor
  */
@@ -146,16 +156,48 @@ typedef struct vidinfo {
 	struct	pxafb_info pxa;
 } vidinfo_t;
 
-extern vidinfo_t panel_info;
+#elif defined(CONFIG_ATMEL_LCD)
+
+typedef struct vidinfo {
+	u_long vl_col;		/* Number of columns (i.e. 640) */
+	u_long vl_row;		/* Number of rows (i.e. 480) */
+	u_long vl_clk;	/* pixel clock in ps    */
+
+	/* LCD configuration register */
+	u_long vl_sync;		/* Horizontal / vertical sync */
+	u_long vl_bpix;		/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+	u_long vl_tft;		/* 0 = passive, 1 = TFT */
+	u_long vl_cont_pol_low;	/* contrast polarity is low */
+
+	/* Horizontal control register. */
+	u_long vl_hsync_len;	/* Length of horizontal sync */
+	u_long vl_left_margin;	/* Time from sync to picture */
+	u_long vl_right_margin;	/* Time from picture to sync */
+
+	/* Vertical control register. */
+	u_long vl_vsync_len;	/* Length of vertical sync */
+	u_long vl_upper_margin;	/* Time from sync to picture */
+	u_long vl_lower_margin;	/* Time from picture to sync */
+
+	u_long	mmio;		/* Memory mapped registers */
+} vidinfo_t;
+
+#else
 
-#elif defined(CONFIG_MCC200)
 typedef struct vidinfo {
 	ushort	vl_col;		/* Number of columns (i.e. 160) */
 	ushort	vl_row;		/* Number of rows (i.e. 100) */
 
 	u_char	vl_bpix;	/* Bits per pixel, 0 = 1 */
+
+	ushort	*cmap;		/* Pointer to the colormap */
+
+	void	*priv;		/* Pointer to driver-specific data */
 } vidinfo_t;
-#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
+
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
+
+extern vidinfo_t panel_info;
 
 /* Video functions */
 
@@ -169,6 +211,8 @@ void	lcd_putc	(const char c);
 void	lcd_puts	(const char *s);
 void	lcd_printf	(const char *fmt, ...);
 
+/* Allow boards to customize the information displayed */
+void lcd_show_board_info(void);
 
 /************************************************************************/
 /* ** BITMAP DISPLAY SUPPORT						*/
@@ -183,8 +227,8 @@ void	lcd_printf	(const char *fmt, ...);
  *  the LCD controller and memory allocation. Someone has to know what
  *  is connected, as we can't autodetect anything.
  */
-#define CFG_HIGH	0	/* Pins are active high			*/
-#define CFG_LOW		1	/* Pins are active low			*/
+#define CONFIG_SYS_HIGH	0	/* Pins are active high			*/
+#define CONFIG_SYS_LOW		1	/* Pins are active low			*/
 
 #define LCD_MONOCHROME	0
 #define LCD_COLOR2	1
@@ -279,7 +323,7 @@ void	lcd_printf	(const char *fmt, ...);
 #if LCD_BPP == LCD_MONOCHROME
 # define COLOR_MASK(c)		((c)	  | (c) << 1 | (c) << 2 | (c) << 3 | \
 				 (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
-#elif LCD_BPP == LCD_COLOR8
+#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
 # define COLOR_MASK(c)		(c)
 #else
 # error Unsupported LCD BPP.