X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Finit.h;h=fd51d7f9667102c61c42bc0c733a7a040a203ddb;hb=bbcacdf4cd23f2e5deb9ef916096c956c955243d;hp=a58d7a6917f23625d59e24200d7448a90c56a03d;hpb=dc145a7be3fc6ae2181488e48aee51a34d43ffa0;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/init.h b/include/init.h index a58d7a6..fd51d7f 100644 --- a/include/init.h +++ b/include/init.h @@ -12,6 +12,17 @@ #ifndef __ASSEMBLY__ /* put C only stuff in this section */ +#include + +/* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ +#ifdef CONFIG_EFI_STUB +#define ll_boot_init() false +#else +#include + +#define ll_boot_init() (!(gd->flags & GD_FLG_SKIP_LL_INIT)) +#endif + /* * Function Prototypes */ @@ -65,6 +76,17 @@ int mach_cpu_init(void); */ int arch_fsp_init(void); +/** + * arch_fsp_init() - perform post-relocation firmware support package init + * + * Where U-Boot relies on binary blobs to handle part of the system init, this + * function can be used to set up the blobs. This is used on some Intel + * platforms. + * + * Return: 0 + */ +int arch_fsp_init_r(void); + int dram_init(void); /** @@ -84,6 +106,11 @@ int dram_init(void); */ int dram_init_banksize(void); +long get_ram_size(long *base, long size); +phys_size_t get_effective_memsize(void); + +int testdram(void); + /** * arch_reserve_stacks() - Reserve all necessary stacks * @@ -103,15 +130,90 @@ int dram_init_banksize(void); int arch_reserve_stacks(void); /** + * arch_reserve_mmu() - Reserve memory for MMU TLB table + * + * Architecture-specific routine for reserving memory for the MMU TLB table. + * This is used in generic board init sequence in common/board_f.c. + * + * If an implementation is not provided, it will just be a nop stub. + * + * Return: 0 if OK + */ +int arch_reserve_mmu(void); + +/** + * arch_setup_bdinfo() - Architecture dependent boardinfo setup + * + * Architecture-specific routine for populating various boardinfo fields of + * gd->bd. It is called during the generic board init sequence. + * + * If an implementation is not provided, it will just be a nop stub. + * + * Return: 0 if OK + */ +int arch_setup_bdinfo(void); + +/** + * setup_bdinfo() - Generic boardinfo setup + * + * Routine for populating various generic boardinfo fields of + * gd->bd. It is called during the generic board init sequence. + * + * Return: 0 if OK + */ +int setup_bdinfo(void); + +/** + * cpu_secondary_init_r() - CPU-specific secondary initialization + * + * After non-volatile devices, environment and cpu code are setup, have + * another round to deal with any initialization that might require + * full access to the environment or loading of some image (firmware) + * from a non-volatile device. + * + * It is called during the generic post-relocation init sequence. + * + * Return: 0 if OK + */ +int cpu_secondary_init_r(void); + +/** + * pci_ep_init() - Initialize pci endpoint devices + * + * It is called during the generic post-relocation init sequence. + * + * Return: 0 if OK + */ +int pci_ep_init(void); + +/** + * pci_init() - Enumerate pci devices + * + * It is called during the generic post-relocation init sequence to enumerate + * pci buses. This is needed, for instance, in the case of DM PCI-based + * Ethernet devices, which will not be detected without having the enumeration + * performed earlier. + * + * Return: 0 if OK + */ +int pci_init(void); + +/** * init_cache_f_r() - Turn on the cache in preparation for relocation * * Return: 0 if OK, -ve on error */ int init_cache_f_r(void); +#if !CONFIG_IS_ENABLED(CPU) +/** + * print_cpuinfo() - Display information about the CPU + * + * Return: 0 if OK, -ve on error + */ int print_cpuinfo(void); +#endif int timer_init(void); -int reserve_mmu(void); int misc_init_f(void); #if defined(CONFIG_DTB_RESELECT) @@ -142,6 +244,8 @@ ulong board_init_f_alloc_reserve(ulong top); */ void board_init_f_init_reserve(ulong base); +struct global_data; + /** * arch_setup_gd() - Set up the global_data pointer * @gd_ptr: Pointer to global data @@ -153,10 +257,11 @@ void board_init_f_init_reserve(ulong base); * * gd = gd_ptr; */ -void arch_setup_gd(gd_t *gd_ptr); +void arch_setup_gd(struct global_data *gd_ptr); /* common/board_r.c */ -void board_init_r(gd_t *id, ulong dest_addr) __attribute__ ((noreturn)); +void board_init_r(struct global_data *id, ulong dest_addr) + __attribute__ ((noreturn)); int cpu_init_r(void); int last_stage_init(void); @@ -164,7 +269,6 @@ int mac_read_from_eeprom(void); int set_cpu_clk_info(void); int update_flash_size(int flash_size); int arch_early_init_r(void); -void pci_init(void); int misc_init_r(void); #if defined(CONFIG_VID) int init_func_vid(void); @@ -174,6 +278,63 @@ int init_func_vid(void); int checkboard(void); int show_board_info(void); +/** + * Get the uppermost pointer that is valid to access + * + * Some systems may not map all of their address space. This function allows + * boards to indicate what their highest support pointer value is for DRAM + * access. + * + * @param total_size Size of U-Boot (unused?) + */ +ulong board_get_usable_ram_top(ulong total_size); + +int board_early_init_f(void); + +/* manipulate the U-Boot fdt before its relocation */ +int board_fix_fdt(void *rw_fdt_blob); +int board_late_init(void); +int board_postclk_init(void); /* after clocks/timebase, before env/serial */ +int board_early_init_r(void); + +/* TODO(sjg@chromium.org): Drop this when DM_PCI migration is completed */ +void pci_init_board(void); + +/** + * arch_initr_trap() - Init traps + * + * Arch specific routine for initializing traps. It is called during the + * generic board init sequence, after relocation. + * + * Return: 0 if OK + */ +int arch_initr_trap(void); + +/** + * main_loop() - Enter the main loop of U-Boot + * + * This normally runs the command line. + */ +void main_loop(void); + +#if defined(CONFIG_ARM) +void relocate_code(ulong addr_moni); +#else +void relocate_code(ulong start_addr_sp, struct global_data *new_gd, + ulong relocaddr) + __attribute__ ((noreturn)); +#endif + +/* Print a numeric value (for use in arch_print_bdinfo()) */ +void bdinfo_print_num_l(const char *name, ulong value); +void bdinfo_print_num_ll(const char *name, unsigned long long value); + +/* Print a clock speed in MHz */ +void bdinfo_print_mhz(const char *name, unsigned long hz); + +/* Show arch-specific information for the 'bd' command */ +void arch_print_bdinfo(void); + #endif /* __ASSEMBLY__ */ /* Put only stuff here that the assembler can digest */