X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fi2c.h;h=1f35acf67595105b5888d2f516bd4647c97cdf07;hb=26750c8aee2383a026e0cf89e9310628d3a5a6a0;hp=f8a59a6699cad4e2afdc3f1e9267d38406f06771;hpb=9eb468da3fd8753de55ab271d6ff5ed7f36d7ea2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/i2c.h b/include/i2c.h
index f8a59a6..1f35acf 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -46,14 +46,16 @@
  */
 #define I2C_RXTX_LEN	128	/* maximum tx/rx buffer length */
 
-#if defined(CONFIG_I2C_MULTI_BUS)
-#define CONFIG_SYS_MAX_I2C_BUS		2
-#define I2C_GET_BUS()		i2c_get_bus_num()
-#define I2C_SET_BUS(a)		i2c_set_bus_num(a)
+#ifdef	CONFIG_I2C_MULTI_BUS
+#define	MAX_I2C_BUS			2
+#define	I2C_MULTI_BUS			1
 #else
-#define CONFIG_SYS_MAX_I2C_BUS		1
-#define I2C_GET_BUS()		0
-#define I2C_SET_BUS(a)
+#define	MAX_I2C_BUS			1
+#define	I2C_MULTI_BUS			0
+#endif
+
+#if !defined(CONFIG_SYS_MAX_I2C_BUS)
+#define CONFIG_SYS_MAX_I2C_BUS		MAX_I2C_BUS
 #endif
 
 /* define the I2C bus number for RTC and DTT if not already done */
@@ -72,22 +74,33 @@
 #  define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
 # elif defined(CONFIG_8xx)
 #  define I2C_SOFT_DECLARATIONS	volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+
+# elif (defined(CONFIG_AT91RM9200) || \
+	defined(CONFIG_AT91SAM9260) ||  defined(CONFIG_AT91SAM9261) || \
+	defined(CONFIG_AT91SAM9263)) && !defined(CONFIG_AT91_LEGACY)
+#  define I2C_SOFT_DECLARATIONS	at91_pio_t *pio	= (at91_pio_t *) ATMEL_BASE_PIOA;
 # else
 #  define I2C_SOFT_DECLARATIONS
 # endif
 #endif
 
 #ifdef CONFIG_8xx
-/* Set default values for the I2C bus speed and slave address on 8xx. In the
+/* Set default value for the I2C bus speed on 8xx. In the
  * future, we'll define these in all 8xx board config files.
  */
 #ifndef	CONFIG_SYS_I2C_SPEED
 #define	CONFIG_SYS_I2C_SPEED	50000
 #endif
+#endif
 
+/*
+ * Many boards/controllers/drivers don't support an I2C slave interface so
+ * provide a default slave address for them for use in common code.  A real
+ * value for CONFIG_SYS_I2C_SLAVE should be defined for any board which does
+ * support a slave interface.
+ */
 #ifndef	CONFIG_SYS_I2C_SLAVE
-#define	CONFIG_SYS_I2C_SLAVE	0xFE
-#endif
+#define	CONFIG_SYS_I2C_SLAVE	0xfe
 #endif
 
 /*
@@ -95,8 +108,9 @@
  * repeatedly to change the speed and slave addresses.
  */
 void i2c_init(int speed, int slaveaddr);
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
 void i2c_init_board(void);
+#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
+void i2c_board_late_init(void);
 #endif
 
 #if defined(CONFIG_I2C_MUX)
@@ -114,8 +128,6 @@ typedef struct _mux_device {
 	struct _mux_device	*next;
 } I2C_MUX_DEVICE;
 
-int	i2c_mux_add_device(I2C_MUX_DEVICE *dev);
-
 I2C_MUX_DEVICE	*i2c_mux_search_device(int id);
 I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
 int i2x_mux_select_mux(int bus);
@@ -224,4 +236,18 @@ int i2c_set_bus_speed(unsigned int);
 
 unsigned int i2c_get_bus_speed(void);
 
+/* NOTE: These two functions MUST be always_inline to avoid code growth! */
+static inline unsigned int I2C_GET_BUS(void) __attribute__((always_inline));
+static inline unsigned int I2C_GET_BUS(void)
+{
+	return I2C_MULTI_BUS ? i2c_get_bus_num() : 0;
+}
+
+static inline void I2C_SET_BUS(unsigned int bus) __attribute__((always_inline));
+static inline void I2C_SET_BUS(unsigned int bus)
+{
+	if (I2C_MULTI_BUS)
+		i2c_set_bus_num(bus);
+}
+
 #endif	/* _I2C_H_ */