X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fdwmmc.h;h=136a95b8cdb69a364840654f063bb611d5bb5e0e;hb=HEAD;hp=7a7555a73ab2c7a5291b5b2f5ee5e263998d4eae;hpb=7a1af7a79bd79ded6a78d0c1afdbc3353669e313;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/dwmmc.h b/include/dwmmc.h
index 7a7555a..136a95b 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -1,15 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2012 SAMSUNG Electronics
  * Jaehoon Chung <jh80.chung@samsung.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __DWMMC_HW_H
 #define __DWMMC_HW_H
 
+#include <asm/cache.h>
 #include <asm/io.h>
 #include <mmc.h>
+#include <linux/bitops.h>
 
 #define DWMCI_CTRL		0x000
 #define	DWMCI_PWREN		0x004
@@ -57,6 +58,7 @@
 #define DWMCI_INTMSK_DTO	(1 << 3)
 #define DWMCI_INTMSK_TXDR	(1 << 4)
 #define DWMCI_INTMSK_RXDR	(1 << 5)
+#define DWMCI_INTMSK_RCRC	(1 << 6)
 #define DWMCI_INTMSK_DCRC	(1 << 7)
 #define DWMCI_INTMSK_RTO	(1 << 8)
 #define DWMCI_INTMSK_DRTO	(1 << 9)
@@ -104,7 +106,11 @@
 #define DWMCI_CTYPE_8BIT	(1 << 16)
 
 /* Status Register */
+#define DWMCI_FIFO_EMPTY	(1 << 2)
+#define DWMCI_FIFO_FULL		(1 << 3)
 #define DWMCI_BUSY		(1 << 9)
+#define DWMCI_FIFO_MASK		0x1fff
+#define DWMCI_FIFO_SHIFT	17
 
 /* FIFOTH Register */
 #define MSIZE(x)		((x) << 28)
@@ -126,6 +132,13 @@
 /* UHS register */
 #define DWMCI_DDR_MODE	(1 << 16)
 
+/* Internal IDMAC interrupt defines */
+#define DWMCI_IDINTEN_RI		BIT(1)
+#define DWMCI_IDINTEN_TI		BIT(0)
+
+#define DWMCI_IDINTEN_MASK	(DWMCI_IDINTEN_TI | \
+				 DWMCI_IDINTEN_RI)
+
 /* quirks */
 #define DWMCI_QUIRK_DISABLE_SMU		(1 << 0)
 
@@ -161,11 +174,29 @@ struct dwmci_host {
 	struct mmc *mmc;
 	void *priv;
 
-	void (*clksel)(struct dwmci_host *host);
+	int (*clksel)(struct dwmci_host *host);
 	void (*board_init)(struct dwmci_host *host);
-	unsigned int (*get_mmc_clk)(struct dwmci_host *host);
 
+	/**
+	 * Get / set a particular MMC clock frequency
+	 *
+	 * This is used to request the current clock frequency of the clock
+	 * that drives the DWMMC peripheral. The caller will then use this
+	 * information to work out the divider it needs to achieve the
+	 * required MMC bus clock frequency. If you want to handle the
+	 * clock external to DWMMC, use @freq to select the frequency and
+	 * return that value too. Then DWMMC will put itself in bypass mode.
+	 *
+	 * @host:	DWMMC host
+	 * @freq:	Frequency the host is trying to achieve
+	 */
+	unsigned int (*get_mmc_clk)(struct dwmci_host *host, uint freq);
+#ifndef CONFIG_BLK
 	struct mmc_config cfg;
+#endif
+
+	/* use fifo mode to read and write data */
+	bool fifo_mode;
 };
 
 struct dwmci_idmac {
@@ -204,5 +235,77 @@ static inline u8 dwmci_readb(struct dwmci_host *host, int reg)
 	return readb(host->ioaddr + reg);
 }
 
+#ifdef CONFIG_BLK
+/**
+ * dwmci_setup_cfg() - Set up the configuration for DWMMC
+ *
+ * This is used to set up a DWMMC device when you are using CONFIG_BLK.
+ *
+ * This should be called from your MMC driver's probe() method once you have
+ * the information required.
+ *
+ * Generally your driver will have a platform data structure which holds both
+ * the configuration (struct mmc_config) and the MMC device info (struct mmc).
+ * For example:
+ *
+ * struct rockchip_mmc_plat {
+ *	struct mmc_config cfg;
+ *	struct mmc mmc;
+ * };
+ *
+ * ...
+ *
+ * Inside U_BOOT_DRIVER():
+ *	.plat_auto	= sizeof(struct rockchip_mmc_plat),
+ *
+ * To access platform data:
+ *	struct rockchip_mmc_plat *plat = dev_get_plat(dev);
+ *
+ * See rockchip_dw_mmc.c for an example.
+ *
+ * @cfg:	Configuration structure to fill in (generally &plat->mmc)
+ * @host:	DWMMC host
+ * @max_clk:	Maximum supported clock speed in HZ (e.g. 150000000)
+ * @min_clk:	Minimum supported clock speed in HZ (e.g. 400000)
+ */
+void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host,
+		u32 max_clk, u32 min_clk);
+
+/**
+ * dwmci_bind() - Set up a new MMC block device
+ *
+ * This is used to set up a DWMMC block device when you are using CONFIG_BLK.
+ * It should be called from your driver's bind() method.
+ *
+ * See rockchip_dw_mmc.c for an example.
+ *
+ * @dev:	Device to set up
+ * @mmc:	Pointer to mmc structure (normally &plat->mmc)
+ * @cfg:	Empty configuration structure (generally &plat->cfg). This is
+ *		normally all zeroes at this point. The only purpose of passing
+ *		this in is to set mmc->cfg to it.
+ * Return: 0 if OK, -ve if the block device could not be created
+ */
+int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg);
+
+#else
+/**
+ * add_dwmci() - Add a new DWMMC interface
+ *
+ * This is used when you are not using CONFIG_BLK. Convert your driver over!
+ *
+ * @host:	DWMMC host structure
+ * @max_clk:	Maximum supported clock speed in HZ (e.g. 150000000)
+ * @min_clk:	Minimum supported clock speed in HZ (e.g. 400000)
+ * Return: 0 if OK, -ve on error
+ */
 int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk);
+#endif /* !CONFIG_BLK */
+
+#ifdef CONFIG_DM_MMC
+/* Export the operations to drivers */
+int dwmci_probe(struct udevice *dev);
+extern const struct dm_mmc_ops dm_dwmci_ops;
+#endif
+
 #endif	/* __DWMMC_HW_H */