X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=e372e903170a873f853d8f871bc9cace22b0a154;hb=HEAD;hp=6a045ec60aeb2bfa51bf32bffbc6bd7376cac1d4;hpb=103d1aecb0b9e48955d4cd90aa3dbc0a22a1fab9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 6a045ec..e372e90 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -11,14 +11,12 @@
 
 /* Cache options */
 #ifndef CONFIG_SYS_L2CACHE_OFF
-# define CONFIG_SYS_L2_PL310
-# define CONFIG_SYS_PL310_BASE		0xf8f02000
+# define CFG_SYS_PL310_BASE		0xf8f02000
 #endif
 
 #define ZYNQ_SCUTIMER_BASEADDR		0xF8F00600
-#define CONFIG_SYS_TIMERBASE		ZYNQ_SCUTIMER_BASEADDR
-#define CONFIG_SYS_TIMER_COUNTS_DOWN
-#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
+#define CFG_SYS_TIMERBASE		ZYNQ_SCUTIMER_BASEADDR
+#define CFG_SYS_TIMER_COUNTER	(CFG_SYS_TIMERBASE + 0x4)
 
 /* GUIDs for capsule updatable firmware images */
 #define XILINX_BOOT_IMAGE_GUID \
@@ -31,28 +29,15 @@
 
 /* Serial drivers */
 /* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE  \
+#define CFG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 /* Ethernet driver */
 
 /* NOR */
-#ifdef CONFIG_MTD_NOR_FLASH
-# define CONFIG_SYS_MAX_FLASH_SECT	512
-# define CONFIG_SYS_FLASH_ERASE_TOUT	1000
-# define CONFIG_SYS_FLASH_WRITE_TOUT	5000
-# define CONFIG_FLASH_SHOW_PROGRESS	10
-# undef CONFIG_SYS_FLASH_EMPTY_INFO
-# define CONFIG_SYS_FLASH_QUIET_TEST
-#endif
-
-#ifdef CONFIG_NAND_ZYNQ
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#endif
 
 #ifdef CONFIG_USB_EHCI_ZYNQ
 # define DFU_DEFAULT_POLL_TIMEOUT	300
-# define CONFIG_THOR_RESET_OFF
 #endif
 
 /* enable preboot to be loaded before CONFIG_BOOTDELAY */
@@ -185,8 +170,8 @@
 #endif /* CONFIG_SPL_BUILD */
 
 /* Default environment */
-#ifndef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS	\
+#ifndef CFG_EXTRA_ENV_SETTINGS
+#define CFG_EXTRA_ENV_SETTINGS	\
 	"scriptaddr=0x20000\0"	\
 	"script_size_f=0x40000\0"	\
 	"fdt_addr_r=0x1f00000\0"        \
@@ -199,15 +184,11 @@
 
 /* Miscellaneous configurable options */
 
-#define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2000
+#define CFG_SYS_INIT_RAM_ADDR	0xFFFF0000
+#define CFG_SYS_INIT_RAM_SIZE	0x2000
 
 
 /* Extend size of kernel image for uncompression */
-#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
-
-/* Boot FreeBSD/vxWorks from an ELF image */
-#define CONFIG_SYS_MMC_MAX_DEVICE	1
 
 /* Address in RAM where the parameters must be copied by SPL. */
 
@@ -215,10 +196,10 @@
 
 /* qspi mode is working fine */
 #ifdef CONFIG_ZYNQ_QSPI
-#define CONFIG_SYS_SPI_ARGS_OFFS	0x200000
-#define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
-#define CONFIG_SYS_SPI_KERNEL_OFFS	(CONFIG_SYS_SPI_ARGS_OFFS + \
-					CONFIG_SYS_SPI_ARGS_SIZE)
+#define CFG_SYS_SPI_ARGS_OFFS	0x200000
+#define CFG_SYS_SPI_ARGS_SIZE	0x80000
+#define CFG_SYS_SPI_KERNEL_OFFS	(CFG_SYS_SPI_ARGS_OFFS + \
+					CFG_SYS_SPI_ARGS_SIZE)
 #endif
 
 /* SP location before relocation, must use scratch RAM */