X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=bd65d20b21509c0e9376baa08ffa88e760159663;hb=86cf1c82850f7c226f23684e19616e526ffaf10f;hp=f24aeda5c9fc057233e29c22450fe7c7793fd8c2;hpb=83144cd3362376fdf0430a91e14f36aa4ee1472b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index f24aeda..bd65d20 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
- * (C) Copyright 2013 Xilinx, Inc.
+ * (C) Copyright 2013 - 2018 Xilinx, Inc.
  *
  * Common configuration options for all Zynq boards.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_ZYNQ_COMMON_H
@@ -38,23 +37,12 @@
 #if defined(CONFIG_ZYNQ_GEM)
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHY_MARVELL
-# define CONFIG_PHY_REALTEK
-# define CONFIG_PHY_XILINX
-# define CONFIG_BOOTP_BOOTPATH
-# define CONFIG_BOOTP_GATEWAY
-# define CONFIG_BOOTP_HOSTNAME
 # define CONFIG_BOOTP_MAY_FAIL
 #endif
 
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-#endif
-
 /* QSPI */
 #ifdef CONFIG_ZYNQ_QSPI
 # define CONFIG_SF_DEFAULT_SPEED	30000000
-# define CONFIG_SPI_FLASH_ISSI
 #endif
 
 /* NOR */
@@ -76,12 +64,6 @@
 #ifdef CONFIG_NAND_ZYNQ
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_MTD_DEVICE
-#endif
-
-/* MMC */
-#if defined(CONFIG_MMC_SDHCI_ZYNQ)
-# define CONFIG_ZYNQ_SDHCI_MAX_FREQ	52000000
 #endif
 
 #ifdef CONFIG_USB_EHCI_ZYNQ
@@ -91,7 +73,6 @@
 # define DFU_DEFAULT_POLL_TIMEOUT	300
 # define CONFIG_USB_CABLE_CHECK
 # define CONFIG_THOR_RESET_OFF
-# define CONFIG_USB_FUNCTION_THOR
 # define DFU_ALT_INFO_RAM \
 	"dfu_ram_info=" \
 	"set dfu_alt_info " \
@@ -124,19 +105,9 @@
 # define DFU_ALT_INFO
 #endif
 
-#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQ_USB)
-# define CONFIG_SUPPORT_VFAT
-#endif
-
-#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
-#define CONFIG_SYS_I2C_ZYNQ
-#endif
-
 /* I2C */
 #if defined(CONFIG_SYS_I2C_ZYNQ)
 # define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
 #endif
 
 /* EEPROM */
@@ -148,18 +119,9 @@
 # define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
 #endif
 
-/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE			(128 << 10)
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-# define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
-# define CONFIG_ENV_OFFSET		0xE0000
-#endif
-
 /* enable preboot to be loaded before CONFIG_BOOTDELAY */
 #define CONFIG_PREBOOT
 
@@ -171,7 +133,6 @@
 #ifdef CONFIG_SPL_BUILD
 #define BOOTENV
 #else
-#include <config_distro_defaults.h>
 
 #ifdef CONFIG_CMD_MMC
 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
@@ -185,7 +146,7 @@
 #define BOOT_TARGET_DEVICES_USB(func)
 #endif
 
-#if defined(CONFIG_CMD_PXE)
+#if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP)
 #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
 #else
 #define BOOT_TARGET_DEVICES_PXE(func)
@@ -263,32 +224,18 @@
 
 /* Miscellaneous configurable options */
 
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
 #define CONFIG_SYS_MAXARGS		32 /* max number of command args */
 
-#ifndef CONFIG_NR_DRAM_BANKS
-# define CONFIG_NR_DRAM_BANKS		1
-#endif
-
 #define CONFIG_SYS_MEMTEST_START	0
 #define CONFIG_SYS_MEMTEST_END		0x1000
 
-#define CONFIG_SYS_MALLOC_LEN		0x1400000
-
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
 					CONFIG_SYS_INIT_RAM_SIZE - \
 					GENERATED_GBL_DATA_SIZE)
 
-/* Enable the PL to be downloaded */
-#define CONFIG_FPGA_ZYNQPL
-
-/* FIT support */
-#define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 
 /* Extend size of kernel image for uncompression */
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
@@ -301,7 +248,6 @@
 /* Commands */
 
 /* SPL part */
-#define CONFIG_SPL_FRAMEWORK
 
 /* MMC support */
 #ifdef CONFIG_MMC_SDHCI_ZYNQ
@@ -327,7 +273,6 @@
 
 /* qspi mode is working fine */
 #ifdef CONFIG_ZYNQ_QSPI
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
 #define CONFIG_SYS_SPI_ARGS_OFFS	0x200000
 #define CONFIG_SYS_SPI_ARGS_SIZE	0x80000