X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=ae08ebf2afc1fcf7e9d4486e981d0c893760664e;hb=e4b91f085d4259f187052ff724c80af38fc11b18;hp=526fe055a833c19eff5e6c7ea7e5b82bd048683c;hpb=d7869b2183d2b786e5410b97a5a6b2e630e7825e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 526fe05..ae08ebf 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -14,6 +14,8 @@
 # define CONFIG_CPU_FREQ_HZ	800000000
 #endif
 
+#define CONFIG_REMAKE_ELF
+
 /* Cache options */
 #define CONFIG_SYS_L2CACHE_OFF
 #ifndef CONFIG_SYS_L2CACHE_OFF
@@ -40,9 +42,6 @@
 #endif
 
 /* QSPI */
-#ifdef CONFIG_ZYNQ_QSPI
-# define CONFIG_SF_DEFAULT_SPEED	30000000
-#endif
 
 /* NOR */
 #ifdef CONFIG_MTD_NOR_FLASH
@@ -53,11 +52,7 @@
 # define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 # define CONFIG_SYS_FLASH_WRITE_TOUT	5000
 # define CONFIG_FLASH_SHOW_PROGRESS	10
-# define CONFIG_SYS_FLASH_CFI
 # undef CONFIG_SYS_FLASH_EMPTY_INFO
-# define CONFIG_FLASH_CFI_DRIVER
-# undef CONFIG_SYS_FLASH_PROTECTION
-# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #endif
 
 #ifdef CONFIG_NAND_ZYNQ
@@ -70,11 +65,10 @@
 
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT	300
-# define CONFIG_USB_CABLE_CHECK
 # define CONFIG_THOR_RESET_OFF
 # define DFU_ALT_INFO_RAM \
 	"dfu_ram_info=" \
-	"set dfu_alt_info " \
+	"setenv dfu_alt_info " \
 	"${kernel_image} ram 0x3000000 0x500000\\\\;" \
 	"${devicetree_image} ram 0x2A00000 0x20000\\\\;" \
 	"${ramdisk_image} ram 0x2000000 0x600000\0" \
@@ -84,7 +78,7 @@
 # if defined(CONFIG_MMC_SDHCI_ZYNQ)
 #  define DFU_ALT_INFO_MMC \
 	"dfu_mmc_info=" \
-	"set dfu_alt_info " \
+	"setenv dfu_alt_info " \
 	"${kernel_image} fat 0 1\\\\;" \
 	"${devicetree_image} fat 0 1\\\\;" \
 	"${ramdisk_image} fat 0 1\0" \
@@ -104,31 +98,14 @@
 # define DFU_ALT_INFO
 #endif
 
-/* I2C */
-#if defined(CONFIG_SYS_I2C_ZYNQ)
-# define CONFIG_SYS_I2C
-#endif
-
-/* EEPROM */
-#ifdef CONFIG_ZYNQ_EEPROM
-# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
-# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
-# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-# define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
-#endif
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 /* enable preboot to be loaded before CONFIG_BOOTDELAY */
-#define CONFIG_PREBOOT
 
 /* Boot configuration */
 #define CONFIG_SYS_LOAD_ADDR		0 /* default? */
 
-/* Distro boot enablement */
-
 #ifdef CONFIG_SPL_BUILD
 #define BOOTENV
 #else
@@ -157,11 +134,62 @@
 #define BOOT_TARGET_DEVICES_DHCP(func)
 #endif
 
+#if defined(CONFIG_ZYNQ_QSPI)
+# define BOOT_TARGET_DEVICES_QSPI(func)	func(QSPI, qspi, na)
+#else
+# define BOOT_TARGET_DEVICES_QSPI(func)
+#endif
+
+#if defined(CONFIG_NAND_ZYNQ)
+# define BOOT_TARGET_DEVICES_NAND(func)	func(NAND, nand, na)
+#else
+# define BOOT_TARGET_DEVICES_NAND(func)
+#endif
+
+#if defined(CONFIG_MTD_NOR_FLASH)
+# define BOOT_TARGET_DEVICES_NOR(func)	func(NOR, nor, na)
+#else
+# define BOOT_TARGET_DEVICES_NOR(func)
+#endif
+
+#define BOOTENV_DEV_XILINX(devtypeu, devtypel, instance) \
+	"bootcmd_xilinx=run $modeboot\0"
+
+#define BOOTENV_DEV_NAME_XILINX(devtypeu, devtypel, instance) \
+	"xilinx "
+
+#define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \
+	"bootcmd_qspi=sf probe 0 0 0 && " \
+		      "sf read $scriptaddr $script_offset_f $script_size_f && " \
+		      "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \
+	"qspi "
+
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+	"bootcmd_nand=nand info && " \
+		      "nand read $scriptaddr $script_offset_f $script_size_f && " \
+		      "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+	"nand "
+
+#define BOOTENV_DEV_NOR(devtypeu, devtypel, instance) \
+	"bootcmd_nor=cp.b $scropt_offset_nor $scriptaddr $script_size_f && " \
+		     "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0"
+
+#define BOOTENV_DEV_NAME_NOR(devtypeu, devtypel, instance) \
+	"nor "
+
 #define BOOT_TARGET_DEVICES(func) \
 	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_QSPI(func) \
+	BOOT_TARGET_DEVICES_NAND(func) \
+	BOOT_TARGET_DEVICES_NOR(func) \
 	BOOT_TARGET_DEVICES_USB(func) \
 	BOOT_TARGET_DEVICES_PXE(func) \
-	BOOT_TARGET_DEVICES_DHCP(func)
+	BOOT_TARGET_DEVICES_DHCP(func) \
+	func(XILINX, xilinx, na)
 
 #include <config_distro_bootcmd.h>
 #endif /* CONFIG_SPL_BUILD */
@@ -176,6 +204,10 @@
 	"nor_flash_off=0xE2100000\0"	\
 	"fdt_high=0x20000000\0"		\
 	"initrd_high=0x20000000\0"	\
+	"scriptaddr=0x20000\0"	\
+	"script_offser_nor=0xE2FC0000\0"	\
+	"script_offset_f=0xFC0000\0"	\
+	"script_size_f=0x40000\0"	\
 	"loadbootenv_addr=0x2000000\0" \
 	"fdt_addr_r=0x1f00000\0"        \
 	"pxefile_addr_r=0x2000000\0"    \
@@ -193,9 +225,9 @@
 				"env run importbootenv; " \
 			"fi; " \
 		"fi; \0" \
-	"sd_loadbootenv=set bootenv_dev mmc && " \
+	"sd_loadbootenv=setenv bootenv_dev mmc && " \
 			"run setbootenv \0" \
-	"usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv \0" \
+	"usb_loadbootenv=setenv bootenv_dev usb && usb start && run setbootenv \0" \
 	"preboot=if test $modeboot = sdboot; then " \
 			"run sd_loadbootenv; " \
 			"echo Checking if uenvcmd is set ...; " \
@@ -242,23 +274,12 @@
 /* Boot FreeBSD/vxWorks from an ELF image */
 #define CONFIG_SYS_MMC_MAX_DEVICE	1
 
-#define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"
-
-/* Commands */
-
-/* SPL part */
-
 /* MMC support */
 #ifdef CONFIG_MMC_SDHCI_ZYNQ
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 #endif
 
-/* Disable dcache for SPL just for sure */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_DCACHE_OFF
-#endif
-
 /* Address in RAM where the parameters must be copied by SPL. */
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
 
@@ -272,17 +293,13 @@
 
 /* qspi mode is working fine */
 #ifdef CONFIG_ZYNQ_QSPI
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
 #define CONFIG_SYS_SPI_ARGS_OFFS	0x200000
 #define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
 #define CONFIG_SYS_SPI_KERNEL_OFFS	(CONFIG_SYS_SPI_ARGS_OFFS + \
 					CONFIG_SYS_SPI_ARGS_SIZE)
 #endif
 
-/* for booting directly linux */
-
 /* SP location before relocation, must use scratch RAM */
-#define CONFIG_SPL_TEXT_BASE	0x0
 
 /* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
 #define CONFIG_SPL_MAX_SIZE	0x30000
@@ -302,6 +319,8 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x100000
 
+#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
+
 #define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 
 #endif /* __CONFIG_ZYNQ_COMMON_H */