X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=ac9663dea6ed260fec31cf8a47b29bfe778b138b;hb=e12546de54fc9be818e8d39967b07fa351d9e5ba;hp=36dc140e002c7f4ba6a9d1fbb1713bfb923c0c0d;hpb=2c45f8040ea1152d2ff0960f96905ca42ac089cd;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 36dc140..ac9663d 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
- * (C) Copyright 2013 Xilinx, Inc.
+ * (C) Copyright 2013 - 2018 Xilinx, Inc.
  *
  * Common configuration options for all Zynq boards.
  *
@@ -28,24 +28,16 @@
 #define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
 
 /* Serial drivers */
-#define CONFIG_BAUDRATE		115200
 /* The following table includes the supported baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 #define CONFIG_ARM_DCC
-#define CONFIG_ZYNQ_SERIAL
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHY_MARVELL
-# define CONFIG_PHY_REALTEK
-# define CONFIG_PHY_XILINX
-# define CONFIG_BOOTP_BOOTPATH
-# define CONFIG_BOOTP_GATEWAY
-# define CONFIG_BOOTP_HOSTNAME
 # define CONFIG_BOOTP_MAY_FAIL
 #endif
 
@@ -60,7 +52,7 @@
 #endif
 
 /* NOR */
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 # define CONFIG_SYS_FLASH_BASE		0xE2000000
 # define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
 # define CONFIG_SYS_MAX_FLASH_BANKS	1
@@ -76,15 +68,13 @@
 #endif
 
 #ifdef CONFIG_NAND_ZYNQ
-#define CONFIG_CMD_NAND_LOCK_UNLOCK
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_MTD_DEVICE
 #endif
 
 /* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI)
-# define CONFIG_GENERIC_MMC
+#if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define CONFIG_ZYNQ_SDHCI_MAX_FREQ	52000000
 #endif
 
@@ -94,9 +84,7 @@
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT	300
 # define CONFIG_USB_CABLE_CHECK
-# define CONFIG_CMD_THOR_DOWNLOAD
 # define CONFIG_THOR_RESET_OFF
-# define CONFIG_USB_FUNCTION_THOR
 # define DFU_ALT_INFO_RAM \
 	"dfu_ram_info=" \
 	"set dfu_alt_info " \
@@ -106,7 +94,7 @@
 	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 
-# if defined(CONFIG_ZYNQ_SDHCI)
+# if defined(CONFIG_MMC_SDHCI_ZYNQ)
 #  define DFU_ALT_INFO_MMC \
 	"dfu_mmc_info=" \
 	"set dfu_alt_info " \
@@ -129,12 +117,6 @@
 # define DFU_ALT_INFO
 #endif
 
-#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
-# define CONFIG_SUPPORT_VFAT
-# define CONFIG_FAT_WRITE
-# define CONFIG_DOS_PARTITION
-#endif
-
 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
 #define CONFIG_SYS_I2C_ZYNQ
 #endif
@@ -148,7 +130,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_ZYNQ_EEPROM
-# define CONFIG_CMD_EEPROM
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 # define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
@@ -164,16 +145,6 @@
 
 /* Environment */
 #ifndef CONFIG_ENV_IS_NOWHERE
-# ifndef CONFIG_SYS_NO_FLASH
-/* Environment in NOR flash */
-#  define CONFIG_ENV_IS_IN_FLASH
-# elif defined(CONFIG_ZYNQ_QSPI)
-/* Environment in Serial Flash */
-#  define CONFIG_ENV_IS_IN_SPI_FLASH
-# elif defined(CONFIG_SYS_NO_FLASH)
-#  define CONFIG_ENV_IS_NOWHERE
-# endif
-
 # define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
 # define CONFIG_ENV_OFFSET		0xE0000
 #endif
@@ -181,6 +152,48 @@
 /* enable preboot to be loaded before CONFIG_BOOTDELAY */
 #define CONFIG_PREBOOT
 
+/* Boot configuration */
+#define CONFIG_SYS_LOAD_ADDR		0 /* default? */
+
+/* Distro boot enablement */
+
+#ifdef CONFIG_SPL_BUILD
+#define BOOTENV
+#else
+
+#ifdef CONFIG_CMD_MMC
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#else
+#define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#ifdef CONFIG_CMD_USB
+#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
+#if defined(CONFIG_CMD_PXE)
+#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
+#else
+#define BOOT_TARGET_DEVICES_PXE(func)
+#endif
+
+#if defined(CONFIG_CMD_DHCP)
+#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define BOOT_TARGET_DEVICES_DHCP(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_USB(func) \
+	BOOT_TARGET_DEVICES_PXE(func) \
+	BOOT_TARGET_DEVICES_DHCP(func)
+
+#include <config_distro_bootcmd.h>
+#endif /* CONFIG_SPL_BUILD */
+
 /* Default environment */
 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS	\
@@ -192,6 +205,11 @@
 	"fdt_high=0x20000000\0"		\
 	"initrd_high=0x20000000\0"	\
 	"loadbootenv_addr=0x2000000\0" \
+	"fdt_addr_r=0x1f00000\0"        \
+	"pxefile_addr_r=0x2000000\0"    \
+	"kernel_addr_r=0x2000000\0"     \
+	"scriptaddr=0x3000000\0"        \
+	"ramdisk_addr_r=0x3100000\0"    \
 	"bootenv=uEnv.txt\0" \
 	"bootenv_dev=mmc\0" \
 	"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
@@ -227,24 +245,14 @@
 			"echo Copying FIT from USB to RAM... && " \
 			"load usb 0 ${load_addr} ${fit_image} && " \
 			"bootm ${load_addr}; fi\0" \
-		DFU_ALT_INFO
+		DFU_ALT_INFO \
+		BOOTENV
 #endif
 
-#define CONFIG_BOOTCOMMAND		"run $modeboot"
-#define CONFIG_SYS_LOAD_ADDR		0 /* default? */
-
 /* Miscellaneous configurable options */
 
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
-#define CONFIG_CMD_CLK
 #define CONFIG_SYS_MAXARGS		32 /* max number of command args */
-#define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
 
 #ifndef CONFIG_NR_DRAM_BANKS
 # define CONFIG_NR_DRAM_BANKS		1
@@ -262,20 +270,11 @@
 					GENERATED_GBL_DATA_SIZE)
 
 /* Enable the PL to be downloaded */
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FPGA_LOADP
-#define CONFIG_CMD_FPGA_LOADBP
-#define CONFIG_CMD_FPGA_LOADFS
 
 /* FIT support */
 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 
-/* FDT support */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
 /* Extend size of kernel image for uncompression */
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
@@ -287,14 +286,9 @@
 /* Commands */
 
 /* SPL part */
-#define CONFIG_CMD_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-
-#define CONFIG_SPL_LDSCRIPT	"arch/arm/mach-zynq/u-boot-spl.lds"
 
 /* MMC support */
-#ifdef CONFIG_ZYNQ_SDHCI
+#ifdef CONFIG_MMC_SDHCI_ZYNQ
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 #endif
@@ -302,7 +296,6 @@
 /* Disable dcache for SPL just for sure */
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_DCACHE_OFF
-#undef CONFIG_FPGA
 #endif
 
 /* Address in RAM where the parameters must be copied by SPL. */
@@ -334,12 +327,9 @@
 /* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
 #define CONFIG_SPL_MAX_SIZE	0x30000
 
-/* The highest 64k OCM address */
-#define OCM_HIGH_ADDR	0xffff0000
-
 /* On the top of OCM space */
-#define CONFIG_SYS_SPL_MALLOC_START	OCM_HIGH_ADDR
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x2000
+#define CONFIG_SYS_SPL_MALLOC_START	CONFIG_SPL_STACK_R_ADDR
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x2000000
 
 /*
  * SPL stack position - and stack goes down