X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=873c42d3a1c03a9b8fed67af3e1802ca341d4b6b;hb=a726075911c231e81ecbe12825840b6183bc10da;hp=926b381580654d8c6144609da3174d3dff75695b;hpb=1131d4e22cf8f13d0dabaad7f1b84d9baffdfbd6;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 926b381..873c42d 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -25,6 +25,11 @@
 # define CONFIG_SYS_PL310_BASE		0xf8f02000
 #endif
 
+#define ZYNQ_SCUTIMER_BASEADDR		0xF8F00600
+#define CONFIG_SYS_TIMERBASE		ZYNQ_SCUTIMER_BASEADDR
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
+
 /* Serial drivers */
 #define CONFIG_BAUDRATE		115200
 /* The following table includes the supported baudrates */
@@ -43,7 +48,6 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
-# define CONFIG_NET_MULTI
 # define CONFIG_ZYNQ_GEM
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
@@ -64,7 +68,6 @@
 
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
 # define CONFIG_SPI_FLASH_SST
 # define CONFIG_CMD_SF
 #endif
@@ -107,10 +110,10 @@
 # define CONFIG_CI_UDC           /* ChipIdea CI13xxx UDC */
 # define CONFIG_USB_GADGET
 # define CONFIG_USB_GADGET_DUALSPEED
-# define CONFIG_USBDOWNLOAD_GADGET
+# define CONFIG_USB_GADGET_DOWNLOAD
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT	300
-# define CONFIG_DFU_FUNCTION
+# define CONFIG_USB_FUNCTION_DFU
 # define CONFIG_DFU_RAM
 # define CONFIG_USB_GADGET_VBUS_DRAW	2
 # define CONFIG_G_DNL_VENDOR_NUM	0x03FD
@@ -120,7 +123,7 @@
 # define CONFIG_USB_CABLE_CHECK
 # define CONFIG_CMD_DFU
 # define CONFIG_CMD_THOR_DOWNLOAD
-# define CONFIG_THOR_FUNCTION
+# define CONFIG_USB_FUNCTION_THOR
 # define DFU_ALT_INFO_RAM \
 	"dfu_ram_info=" \
 	"set dfu_alt_info " \
@@ -200,7 +203,6 @@
 
 # define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
 # define CONFIG_ENV_OFFSET		0xE0000
-# define CONFIG_CMD_SAVEENV
 #endif
 
 /* Default environment */
@@ -233,7 +235,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0 /* default? */
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT		"zynq-uboot> "
 #define CONFIG_SYS_HUSH_PARSER
 
 #define CONFIG_CMDLINE_EDITING
@@ -268,7 +269,6 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA
 #define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_FPGA_LOADP
 #define CONFIG_CMD_FPGA_LOADBP
@@ -289,15 +289,12 @@
 /* Boot FreeBSD/vxWorks from an ELF image */
 #if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
 # define CONFIG_API
-# define CONFIG_CMD_ELF
 # define CONFIG_SYS_MMC_MAX_DEVICE	1
 #endif
 
 #define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"
 
 /* Commands */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
@@ -321,7 +318,7 @@
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 #endif
 
 /* Disable dcache for SPL just for sure */