X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=4b6b08885134125187fb38a82a4e4a983c6483e5;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=0118fd246243addcef2d25fb8698f0f4c4b3fb6d;hpb=5ebd27d860ec0c6e36f1b0f973653fe66a7360be;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 0118fd2..4b6b088 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -28,7 +28,6 @@
 #define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
 
 /* Serial drivers */
-#define CONFIG_BAUDRATE		115200
 /* The following table includes the supported baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
@@ -43,7 +42,6 @@
 # define CONFIG_PHY_MARVELL
 # define CONFIG_PHY_REALTEK
 # define CONFIG_PHY_XILINX
-# define CONFIG_BOOTP_SERVERIP
 # define CONFIG_BOOTP_BOOTPATH
 # define CONFIG_BOOTP_GATEWAY
 # define CONFIG_BOOTP_HOSTNAME
@@ -61,7 +59,7 @@
 #endif
 
 /* NOR */
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 # define CONFIG_SYS_FLASH_BASE		0xE2000000
 # define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
 # define CONFIG_SYS_MAX_FLASH_BANKS	1
@@ -76,17 +74,20 @@
 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #endif
 
+#ifdef CONFIG_NAND_ZYNQ
+#define CONFIG_CMD_NAND_LOCK_UNLOCK
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_MTD_DEVICE
+#endif
+
 /* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI)
-# define CONFIG_MMC
-# define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
+#if defined(CONFIG_MMC_SDHCI_ZYNQ)
 # define CONFIG_ZYNQ_SDHCI_MAX_FREQ	52000000
 #endif
 
 #ifdef CONFIG_USB_EHCI_ZYNQ
 # define CONFIG_EHCI_IS_TDI
-# define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT	300
@@ -103,7 +104,7 @@
 	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
 	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 
-# if defined(CONFIG_ZYNQ_SDHCI)
+# if defined(CONFIG_MMC_SDHCI_ZYNQ)
 #  define DFU_ALT_INFO_MMC \
 	"dfu_mmc_info=" \
 	"set dfu_alt_info " \
@@ -126,10 +127,8 @@
 # define DFU_ALT_INFO
 #endif
 
-#if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
+#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQ_USB)
 # define CONFIG_SUPPORT_VFAT
-# define CONFIG_FAT_WRITE
-# define CONFIG_DOS_PARTITION
 #endif
 
 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
@@ -145,7 +144,6 @@
 
 /* EEPROM */
 #ifdef CONFIG_ZYNQ_EEPROM
-# define CONFIG_CMD_EEPROM
 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 # define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
@@ -161,13 +159,13 @@
 
 /* Environment */
 #ifndef CONFIG_ENV_IS_NOWHERE
-# ifndef CONFIG_SYS_NO_FLASH
+# ifdef CONFIG_MTD_NOR_FLASH
 /* Environment in NOR flash */
 #  define CONFIG_ENV_IS_IN_FLASH
 # elif defined(CONFIG_ZYNQ_QSPI)
 /* Environment in Serial Flash */
 #  define CONFIG_ENV_IS_IN_SPI_FLASH
-# elif defined(CONFIG_SYS_NO_FLASH)
+# elif !defined(CONFIG_MTD_NOR_FLASH)
 #  define CONFIG_ENV_IS_NOWHERE
 # endif
 
@@ -234,18 +232,13 @@
 
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
-#define CONFIG_CMD_CLK
 #define CONFIG_SYS_MAXARGS		32 /* max number of command args */
 #define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
-/* Physical Memory map */
-#define CONFIG_SYS_TEXT_BASE		0x4000000
-
 #ifndef CONFIG_NR_DRAM_BANKS
 # define CONFIG_NR_DRAM_BANKS		1
 #endif
@@ -265,10 +258,6 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_FPGA_LOADP
-#define CONFIG_CMD_FPGA_LOADBP
-#define CONFIG_CMD_FPGA_LOADFS
 
 /* FIT support */
 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
@@ -289,15 +278,11 @@
 /* SPL part */
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_RAM_DEVICE
 
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/mach-zynq/u-boot-spl.lds"
 
 /* MMC support */
-#ifdef CONFIG_ZYNQ_SDHCI
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+#ifdef CONFIG_MMC_SDHCI_ZYNQ
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 #endif
@@ -330,7 +315,6 @@
 #endif
 
 /* for booting directly linux */
-#define CONFIG_SPL_OS_BOOT
 
 /* SP location before relocation, must use scratch RAM */
 #define CONFIG_SPL_TEXT_BASE	0x0