X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=3b0aca2fe37f353c61a344799b973aeebd269c9c;hb=b0cf733933c3bc1b4ab353e16affabc60f863db5;hp=e4d1111f4915f6f8e6082dfae9c1f0c661f607c2;hpb=a59a77f86318550168d5ceec36a7ca0add42d778;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index e4d1111..3b0aca2 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -16,9 +16,6 @@
 #endif
 
 /* Cache options */
-#define CONFIG_CMD_CACHE
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
 #define CONFIG_SYS_L2CACHE_OFF
 #ifndef CONFIG_SYS_L2CACHE_OFF
 # define CONFIG_SYS_L2_PL310
@@ -46,7 +43,6 @@
 # define CONFIG_PHY_MARVELL
 # define CONFIG_PHY_REALTEK
 # define CONFIG_PHY_XILINX
-# define CONFIG_BOOTP_SERVERIP
 # define CONFIG_BOOTP_BOOTPATH
 # define CONFIG_BOOTP_GATEWAY
 # define CONFIG_BOOTP_HOSTNAME
@@ -55,14 +51,12 @@
 
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_CMD_SF
 #endif
 
 /* QSPI */
 #ifdef CONFIG_ZYNQ_QSPI
 # define CONFIG_SF_DEFAULT_SPEED	30000000
 # define CONFIG_SPI_FLASH_ISSI
-# define CONFIG_CMD_SF
 #endif
 
 /* NOR */
@@ -81,35 +75,25 @@
 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #endif
 
+#ifdef CONFIG_NAND_ZYNQ
+#define CONFIG_CMD_NAND_LOCK_UNLOCK
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_MTD_DEVICE
+#endif
+
 /* MMC */
 #if defined(CONFIG_ZYNQ_SDHCI)
-# define CONFIG_MMC
 # define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
-# define CONFIG_CMD_MMC
 # define CONFIG_ZYNQ_SDHCI_MAX_FREQ	52000000
 #endif
 
-#ifdef CONFIG_ZYNQ_USB
-# define CONFIG_USB_EHCI
-# define CONFIG_CMD_USB
-# define CONFIG_USB_STORAGE
-# define CONFIG_USB_EHCI_ZYNQ
+#ifdef CONFIG_USB_EHCI_ZYNQ
 # define CONFIG_EHCI_IS_TDI
-# define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 
-# define CONFIG_CI_UDC           /* ChipIdea CI13xxx UDC */
-# define CONFIG_USB_GADGET_DUALSPEED
-# define CONFIG_USB_GADGET_DOWNLOAD
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT	300
-# define CONFIG_USB_FUNCTION_DFU
-# define CONFIG_DFU_RAM
-# define CONFIG_G_DNL_VENDOR_NUM	0x03FD
-# define CONFIG_G_DNL_PRODUCT_NUM	0x0300
-# define CONFIG_G_DNL_MANUFACTURER	"Xilinx"
 # define CONFIG_USB_CABLE_CHECK
-# define CONFIG_CMD_DFU
 # define CONFIG_CMD_THOR_DOWNLOAD
 # define CONFIG_THOR_RESET_OFF
 # define CONFIG_USB_FUNCTION_THOR
@@ -123,7 +107,6 @@
 	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
 
 # if defined(CONFIG_ZYNQ_SDHCI)
-#  define CONFIG_DFU_MMC
 #  define DFU_ALT_INFO_MMC \
 	"dfu_mmc_info=" \
 	"set dfu_alt_info " \
@@ -148,13 +131,7 @@
 
 #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB)
 # define CONFIG_SUPPORT_VFAT
-# define CONFIG_CMD_FAT
-# define CONFIG_CMD_EXT2
 # define CONFIG_FAT_WRITE
-# define CONFIG_DOS_PARTITION
-# define CONFIG_CMD_EXT4
-# define CONFIG_CMD_EXT4_WRITE
-# define CONFIG_CMD_FS_GENERIC
 #endif
 
 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
@@ -163,7 +140,6 @@
 
 /* I2C */
 #if defined(CONFIG_SYS_I2C_ZYNQ)
-# define CONFIG_CMD_I2C
 # define CONFIG_SYS_I2C
 # define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
 # define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
@@ -254,16 +230,12 @@
 #endif
 
 #define CONFIG_BOOTCOMMAND		"run $modeboot"
-#define CONFIG_BOOTDELAY		3 /* -1 to Disable autoboot */
 #define CONFIG_SYS_LOAD_ADDR		0 /* default? */
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_HUSH_PARSER
 
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
 #define CONFIG_CMD_CLK
@@ -272,9 +244,6 @@
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
 
-/* Physical Memory map */
-#define CONFIG_SYS_TEXT_BASE		0x4000000
-
 #ifndef CONFIG_NR_DRAM_BANKS
 # define CONFIG_NR_DRAM_BANKS		1
 #endif
@@ -314,35 +283,18 @@
 #define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"
 
 /* Commands */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_TFTPPUT
 
 /* SPL part */
 #define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_RAM_DEVICE
 
 #define CONFIG_SPL_LDSCRIPT	"arch/arm/mach-zynq/u-boot-spl.lds"
 
 /* MMC support */
 #ifdef CONFIG_ZYNQ_SDHCI
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#ifdef CONFIG_OF_SEPARATE
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot-dtb.img"
-#else
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
-#endif
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME     "u-boot.img"
 #endif
 
 /* Disable dcache for SPL just for sure */
@@ -364,9 +316,7 @@
 
 /* qspi mode is working fine */
 #ifdef CONFIG_ZYNQ_QSPI
-#define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
 #define CONFIG_SYS_SPI_ARGS_OFFS	0x200000
 #define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
@@ -375,7 +325,6 @@
 #endif
 
 /* for booting directly linux */
-#define CONFIG_SPL_OS_BOOT
 
 /* SP location before relocation, must use scratch RAM */
 #define CONFIG_SPL_TEXT_BASE	0x0
@@ -403,5 +352,4 @@
 
 #define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 
-
 #endif /* __CONFIG_ZYNQ_COMMON_H */