X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=28cee15b37a5d8d47f071b9238310c03ccb0ac82;hb=8bad6cb176a0e92ac8e7771fb68e5e0713edbf8e;hp=4975d76c36f18fe923177a8299191e148a580da3;hpb=ec7483e34ea932fb68267dc0b1de30be51f271c9;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 4975d76..28cee15 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -33,7 +33,6 @@
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
 #define CONFIG_ARM_DCC
-#define CONFIG_ZYNQ_SERIAL
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
@@ -91,7 +90,6 @@
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT	300
 # define CONFIG_USB_CABLE_CHECK
-# define CONFIG_CMD_THOR_DOWNLOAD
 # define CONFIG_THOR_RESET_OFF
 # define CONFIG_USB_FUNCTION_THOR
 # define DFU_ALT_INFO_RAM \
@@ -126,10 +124,6 @@
 # define DFU_ALT_INFO
 #endif
 
-#if defined(CONFIG_MMC_SDHCI_ZYNQ) || defined(CONFIG_ZYNQ_USB)
-# define CONFIG_SUPPORT_VFAT
-#endif
-
 #if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
 #define CONFIG_SYS_I2C_ZYNQ
 #endif
@@ -158,12 +152,6 @@
 
 /* Environment */
 #ifndef CONFIG_ENV_IS_NOWHERE
-# ifdef CONFIG_MTD_NOR_FLASH
-/* Environment in NOR flash */
-# elif defined(CONFIG_ZYNQ_QSPI)
-/* Environment in Serial Flash */
-# endif
-
 # define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
 # define CONFIG_ENV_OFFSET		0xE0000
 #endif
@@ -171,6 +159,50 @@
 /* enable preboot to be loaded before CONFIG_BOOTDELAY */
 #define CONFIG_PREBOOT
 
+/* Boot configuration */
+#define CONFIG_BOOTCOMMAND		"run $modeboot || run distro_bootcmd"
+#define CONFIG_SYS_LOAD_ADDR		0 /* default? */
+
+/* Distro boot enablement */
+
+#ifdef CONFIG_SPL_BUILD
+#define BOOTENV
+#else
+#include <config_distro_defaults.h>
+
+#ifdef CONFIG_CMD_MMC
+#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
+#else
+#define BOOT_TARGET_DEVICES_MMC(func)
+#endif
+
+#ifdef CONFIG_CMD_USB
+#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_DEVICES_USB(func)
+#endif
+
+#if defined(CONFIG_CMD_PXE)
+#define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na)
+#else
+#define BOOT_TARGET_DEVICES_PXE(func)
+#endif
+
+#if defined(CONFIG_CMD_DHCP)
+#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
+#else
+#define BOOT_TARGET_DEVICES_DHCP(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+	BOOT_TARGET_DEVICES_MMC(func) \
+	BOOT_TARGET_DEVICES_USB(func) \
+	BOOT_TARGET_DEVICES_PXE(func) \
+	BOOT_TARGET_DEVICES_DHCP(func)
+
+#include <config_distro_bootcmd.h>
+#endif /* CONFIG_SPL_BUILD */
+
 /* Default environment */
 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS	\
@@ -182,6 +214,11 @@
 	"fdt_high=0x20000000\0"		\
 	"initrd_high=0x20000000\0"	\
 	"loadbootenv_addr=0x2000000\0" \
+	"fdt_addr_r=0x1f00000\0"        \
+	"pxefile_addr_r=0x2000000\0"    \
+	"kernel_addr_r=0x2000000\0"     \
+	"scriptaddr=0x3000000\0"        \
+	"ramdisk_addr_r=0x3100000\0"    \
 	"bootenv=uEnv.txt\0" \
 	"bootenv_dev=mmc\0" \
 	"loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \
@@ -217,12 +254,10 @@
 			"echo Copying FIT from USB to RAM... && " \
 			"load usb 0 ${load_addr} ${fit_image} && " \
 			"bootm ${load_addr}; fi\0" \
-		DFU_ALT_INFO
+		DFU_ALT_INFO \
+		BOOTENV
 #endif
 
-#define CONFIG_BOOTCOMMAND		"run $modeboot"
-#define CONFIG_SYS_LOAD_ADDR		0 /* default? */
-
 /* Miscellaneous configurable options */
 
 #define CONFIG_CMDLINE_EDITING
@@ -230,9 +265,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CLOCKS
 #define CONFIG_SYS_MAXARGS		32 /* max number of command args */
-#define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
 
 #ifndef CONFIG_NR_DRAM_BANKS
 # define CONFIG_NR_DRAM_BANKS		1
@@ -250,16 +282,11 @@
 					GENERATED_GBL_DATA_SIZE)
 
 /* Enable the PL to be downloaded */
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
 
 /* FIT support */
 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
 
-/* FDT support */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
-
 /* Extend size of kernel image for uncompression */
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
 
@@ -271,11 +298,8 @@
 /* Commands */
 
 /* SPL part */
-#define CONFIG_CMD_SPL
 #define CONFIG_SPL_FRAMEWORK
 
-#define CONFIG_SPL_LDSCRIPT	"arch/arm/mach-zynq/u-boot-spl.lds"
-
 /* MMC support */
 #ifdef CONFIG_MMC_SDHCI_ZYNQ
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
@@ -285,7 +309,6 @@
 /* Disable dcache for SPL just for sure */
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_DCACHE_OFF
-#undef CONFIG_FPGA
 #endif
 
 /* Address in RAM where the parameters must be copied by SPL. */
@@ -317,12 +340,9 @@
 /* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
 #define CONFIG_SPL_MAX_SIZE	0x30000
 
-/* The highest 64k OCM address */
-#define OCM_HIGH_ADDR	0xffff0000
-
 /* On the top of OCM space */
-#define CONFIG_SYS_SPL_MALLOC_START	OCM_HIGH_ADDR
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x2000
+#define CONFIG_SYS_SPL_MALLOC_START	CONFIG_SPL_STACK_R_ADDR
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x2000000
 
 /*
  * SPL stack position - and stack goes down