X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=1710feda9185ccc7c1713e8dbb6bdf5f27ca04b8;hb=d01806a8fcbdaedcc67cead56ece572021d97ab7;hp=e5036171783bcd891dac5be4b0a0eac13bb60013;hpb=b25f8e2112b1582ce6386e846800a31bab688e50;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index e503617..1710fed 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
  * (C) Copyright 2013 - 2018 Xilinx, Inc.
  *
  * Common configuration options for all Zynq boards.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_ZYNQ_COMMON_H
@@ -15,6 +14,8 @@
 # define CONFIG_CPU_FREQ_HZ	800000000
 #endif
 
+#define CONFIG_REMAKE_ELF
+
 /* Cache options */
 #define CONFIG_SYS_L2CACHE_OFF
 #ifndef CONFIG_SYS_L2CACHE_OFF
@@ -36,19 +37,13 @@
 
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM)
-# define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 # define CONFIG_BOOTP_MAY_FAIL
 #endif
 
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-#endif
-
 /* QSPI */
 #ifdef CONFIG_ZYNQ_QSPI
 # define CONFIG_SF_DEFAULT_SPEED	30000000
-# define CONFIG_SPI_FLASH_ISSI
 #endif
 
 /* NOR */
@@ -60,17 +55,12 @@
 # define CONFIG_SYS_FLASH_ERASE_TOUT	1000
 # define CONFIG_SYS_FLASH_WRITE_TOUT	5000
 # define CONFIG_FLASH_SHOW_PROGRESS	10
-# define CONFIG_SYS_FLASH_CFI
 # undef CONFIG_SYS_FLASH_EMPTY_INFO
-# define CONFIG_FLASH_CFI_DRIVER
-# undef CONFIG_SYS_FLASH_PROTECTION
-# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #endif
 
 #ifdef CONFIG_NAND_ZYNQ
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_MTD_DEVICE
 #endif
 
 #ifdef CONFIG_USB_EHCI_ZYNQ
@@ -126,30 +116,15 @@
 # define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
 #endif
 
-/* Total Size of Environment Sector */
-#ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE			(128 << 10)
-#endif
-
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-# define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
-# ifndef CONFIG_ENV_OFFSET
-#  define CONFIG_ENV_OFFSET		0xE0000
-# endif
-#endif
-
 /* enable preboot to be loaded before CONFIG_BOOTDELAY */
 #define CONFIG_PREBOOT
 
 /* Boot configuration */
 #define CONFIG_SYS_LOAD_ADDR		0 /* default? */
 
-/* Distro boot enablement */
-
 #ifdef CONFIG_SPL_BUILD
 #define BOOTENV
 #else
@@ -247,15 +222,9 @@
 #define CONFIG_CLOCKS
 #define CONFIG_SYS_MAXARGS		32 /* max number of command args */
 
-#ifndef CONFIG_NR_DRAM_BANKS
-# define CONFIG_NR_DRAM_BANKS		1
-#endif
-
 #define CONFIG_SYS_MEMTEST_START	0
 #define CONFIG_SYS_MEMTEST_END		0x1000
 
-#define CONFIG_SYS_MALLOC_LEN		0x1400000
-
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
 #define CONFIG_SYS_INIT_RAM_SIZE	0x1000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
@@ -271,10 +240,6 @@
 
 #define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"
 
-/* Commands */
-
-/* SPL part */
-
 /* MMC support */
 #ifdef CONFIG_MMC_SDHCI_ZYNQ
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
@@ -306,8 +271,6 @@
 					CONFIG_SYS_SPI_ARGS_SIZE)
 #endif
 
-/* for booting directly linux */
-
 /* SP location before relocation, must use scratch RAM */
 #define CONFIG_SPL_TEXT_BASE	0x0
 
@@ -329,6 +292,8 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x100000
 
+#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000
+
 #define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 
 #endif /* __CONFIG_ZYNQ_COMMON_H */