X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzylonite.h;h=86b6ea1e1842a67a786864cff3469047b39a5544;hb=1c19863fa2ab1fe340cdd7924c84a34f308de6e1;hp=53397d807f7d88925ad1ca3589885daf77f92fcd;hpb=cb5473205206c7f14cbb1e747f28ec75b48826e2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 53397d8..86b6ea1 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -41,12 +41,15 @@
 #ifdef CONFIG_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
-/* #define CONFIG_MMC		1 */
+#undef CONFIG_MMC
 #define BOARD_LATE_INIT		1
 
 #undef CONFIG_SKIP_RELOCATE_UBOOT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
@@ -69,6 +72,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART	       1
 
 /* allow to overwrite serial and ethaddr */
@@ -94,7 +98,7 @@
 #ifdef TURN_ON_ETHERNET
     #define CONFIG_CMD_PING
 #else
-    #define CONFIG_CMD_ENV
+    #define CONFIG_CMD_SAVEENV
     #define CONFIG_CMD_NAND
 
     #undef CONFIG_CMD_NET
@@ -139,11 +143,9 @@
 #define CONFIG_SYS_MEMTEST_START	0x9c000000	/* memtest works on	*/
 #define CONFIG_SYS_MEMTEST_END		0x9c400000	/* 4 ... 8 MB in DRAM	*/
 
-#undef	CONFIG_SYS_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DRAM_BASE + 0x8000) /* default load address */
 
-#define CONFIG_SYS_HZ			3250000		/* incrementer freq: 3.25 MHz */
+#define CONFIG_SYS_HZ			1000
 
 /* Monahans Core Frequency */
 #define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO		16 /* valid values: 8, 16, 24, 31 */
@@ -152,7 +154,11 @@
 						/* valid baudrates */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-/* #define CONFIG_SYS_MMC_BASE		0xF0000000 */
+#ifdef CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SYS_MMC_BASE		0xF0000000
+#endif
 
 /*
  * Stack sizes
@@ -187,7 +193,6 @@
 /*
  * NAND Flash
  */
-#define CONFIG_NEW_NAND_CODE
 #define CONFIG_SYS_NAND0_BASE		0x0
 #undef CONFIG_SYS_NAND1_BASE
 
@@ -200,6 +205,8 @@
 #define CONFIG_SYS_NAND_SENDCMD_RETRY	3
 #undef NAND_ALLOW_ERASE_ALL	/* Allow erasing bad blocks - don't use */
 
+#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
+
 /* NAND Timing Parameters (in ns) */
 #define NAND_TIMING_tCH		10
 #define NAND_TIMING_tCS		0
@@ -221,14 +228,6 @@
 #define CONFIG_MTD_DEBUG
 #define CONFIG_MTD_DEBUG_VERBOSE 1
 
-#define ADDR_COLUMN		1
-#define ADDR_PAGE		2
-#define ADDR_COLUMN_PAGE	3
-
-#define NAND_ChipID_UNKNOWN	0x00
-#define NAND_MAX_FLOORS		1
-#define NAND_MAX_CHIPS		1
-
 #define CONFIG_SYS_NO_FLASH		1
 
 #define CONFIG_ENV_IS_IN_NAND	1