X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzmx25.h;h=c1daf65621324678495cda4d19fb3d7c5cab8e87;hb=4125bbcef6a998ce8580a1f5c53c8c93a56a125b;hp=af7cc497513483d76394bc4b422e945749c42116;hpb=808bf7cf655a1caa5f48f6f3a6b274f4b83ab8b4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index af7cc49..c1daf65 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -15,8 +15,6 @@
 #define CONFIG_MX25
 #define CONFIG_SYS_TEXT_BASE		0xA0000000
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 #define CONFIG_SYS_TIMER_RATE		32768
 #define CONFIG_SYS_TIMER_COUNTER	\
 	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
@@ -35,7 +33,6 @@
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_BOARD_LATE_INIT
 
 /*
  * Compressions
@@ -57,7 +54,6 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART2_BASE
 #define CONFIG_CONS_INDEX	1	/* use UART2 for console */
-#define CONFIG_BAUDRATE		115200	/* Default baud rate */
 
 /*
  * Ethernet
@@ -77,32 +73,21 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_CACHE
 
 /*
  * Additional command
  */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
-
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * USB
  */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
 #define CONFIG_USB_EHCI_MXC
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
 #define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_VFAT
 #endif /* CONFIG_CMD_USB */
 
@@ -138,7 +123,6 @@
 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)
 
-#define CONFIG_SYS_PROMPT	"zmx25> "
 #define CONFIG_SYS_CBSIZE	256
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
@@ -148,7 +132,6 @@
 
 #define CONFIG_PREBOOT  ""
 
-#define CONFIG_BOOTDELAY	5
 
 /*
  * Size of malloc() pool