X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzmx25.h;h=b7134ebc20d15ea262593f9c501fb8fa451eaaec;hb=a726075911c231e81ecbe12825840b6183bc10da;hp=0d5ee141f3449bf8a053f3e8651d289358e949f9;hpb=31a4f1e5b6ee9b6335f0313dce7637cef887f84f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 0d5ee14..b7134eb 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -4,34 +4,23 @@
  *
  * Configuation settings for the zmx25 board
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
+#include <asm/arch/imx-regs.h>
+
 #define CONFIG_MX25
-#define CONFIG_MX25_CLK32		32768	/* OSC32K frequency */
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0xA0000000
 
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_SYS_TIMER_RATE		32768
+#define CONFIG_SYS_TIMER_COUNTER	\
+	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
+
 #define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
 /*
  * Environment settings
@@ -46,7 +35,7 @@
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define BOARD_LATE_INIT
+#define CONFIG_BOARD_LATE_INIT
 
 /*
  * Compressions
@@ -66,10 +55,9 @@
  * Serial
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART2
+#define CONFIG_MXC_UART_BASE	UART2_BASE
 #define CONFIG_CONS_INDEX	1	/* use UART2 for console */
 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Ethernet
@@ -89,23 +77,17 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_CACHE
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-
 /*
  * Additional command
  */
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_USB
 
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 /*
  * USB
@@ -114,9 +96,9 @@
 #define CONFIG_USB_EHCI			/* Enable EHCI USB support */
 #define CONFIG_USB_EHCI_MXC
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORT	2
-#define CONFIG_MXC_USB_PORTSC	0xC0000000
-#define CONFIG_MXC_USB_FLAGS	0
+#define CONFIG_MXC_USB_PORT	1
+#define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
+#define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
@@ -155,7 +137,6 @@
 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)
 
-#define CONFIG_SYS_PROMPT	"zmx25> "
 #define CONFIG_SYS_CBSIZE	256
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
@@ -166,15 +147,10 @@
 #define CONFIG_PREBOOT  ""
 
 #define CONFIG_BOOTDELAY	5
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"delaygs"
-#define CONFIG_AUTOBOOT_STOP_STR	"stopgs"
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		(0x400000 - 0x8000)
-#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
 
 #endif	/* __CONFIG_H */