X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzmx25.h;h=05094a62d75c54f183f9af1919bfb19e3329433b;hb=8850c5d57c10aa6431d138d426e6e105c99cc7ba;hp=765b849e25a48b78501a89fcb421bea719e19f3e;hpb=aaf5e825606a70ddc8fca8e366d8c16a6fd3cc7c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 765b849..05094a6 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -10,11 +10,15 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
+#include <asm/arch/imx-regs.h>
+
 #define CONFIG_MX25
-#define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0xA0000000
 
+#define CONFIG_SYS_TIMER_RATE		32768
+#define CONFIG_SYS_TIMER_COUNTER	\
+	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
+
 #define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
 /*
  * Environment settings
@@ -29,7 +33,6 @@
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_BOARD_LATE_INIT
 
 /*
  * Compressions
@@ -51,7 +54,6 @@
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	UART2_BASE
 #define CONFIG_CONS_INDEX	1	/* use UART2 for console */
-#define CONFIG_BAUDRATE		115200	/* Default baud rate */
 
 /*
  * Ethernet
@@ -71,34 +73,22 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_CACHE
 
 /*
  * Additional command
  */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
-
-#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * USB
  */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_HCD		/* Enable EHCI USB support */
 #define CONFIG_USB_EHCI_MXC
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORT	1
 #define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
 #define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_VFAT
 #endif /* CONFIG_CMD_USB */
 
@@ -134,7 +124,6 @@
 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)
 
-#define CONFIG_SYS_PROMPT	"zmx25> "
 #define CONFIG_SYS_CBSIZE	256
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
@@ -144,11 +133,6 @@
 
 #define CONFIG_PREBOOT  ""
 
-#define CONFIG_BOOTDELAY	5
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"delaygs"
-#define CONFIG_AUTOBOOT_STOP_STR	"stopgs"
 
 /*
  * Size of malloc() pool