X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fzeus.h;h=4d7a7fc75559af286beb52e5263ef846d76d2a98;hb=1a0afe1fad4cc1941cae681e6036ea7a576a833e;hp=75195bc742cf65a121bf88db7529c3b17290d0a1;hpb=ea818dbbcd59300b56014ac2d67798a54994eb9b;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index 75195bc..4d7a7fc 100644
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /************************************************************************
@@ -31,7 +15,6 @@
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
 #define CONFIG_ZEUS		1		/* Board is Zeus	*/
-#define CONFIG_4xx		1		/* ... PPC4xx family	*/
 #define CONFIG_405EP		1		/* Specifc 405EP support*/
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
@@ -138,7 +121,6 @@
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	        "=> "	/* Monitor Command Prompt	*/
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
 #else
@@ -154,8 +136,6 @@
 #define CONFIG_SYS_LOAD_ADDR		0x100000  /* default load address	*/
 #define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
-
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
@@ -168,10 +148,11 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
-#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
-#define CONFIG_SYS_I2C_SPEED		400000		/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
 
 /* these are for the ST M24C02 2kbit serial i2c eeprom */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
@@ -301,7 +282,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
 /*
@@ -337,7 +317,7 @@
 		" ramdisk_size=${ramdisk_size}\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-	        ":${hostname}:${netdev}:off panic=1\0"			\
+		":${hostname}:${netdev}:off panic=1\0"			\
 	"addtty=setenv bootargs ${bootargs} console=ttyS0,"		\
 		"${baudrate}\0"						\
 	"net_nfs=tftp ${kernel_mem_addr} ${file_kernel};"		\
@@ -367,7 +347,7 @@
 	"file_fs=/zeus/rootfs_ba.img\0"					\
 	"tftp_fs=tftp 100000 ${file_fs}\0"				\
 	"update_fs=protect off ff300000 ff87ffff;era ff300000 ff87ffff;"\
-	        "cp.b 100000 ff300000 580000\0"				\
+		"cp.b 100000 ff300000 580000\0"				\
 	"upd_fs=run tftp_fs;run update_fs\0"				\
 	"bootcmd=chkreset;run ramargs addip addtty addmisc;"		\
 		"bootm ${kernel_fl_addr} ${ramdisk_fl_addr}\0"		\