X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxpress.h;h=e13b792f38679eb911e8c17fc48b1c0bb1675c26;hb=a1dc980d88a5c9c2b99251c8d8299b0c8948de73;hp=dc7a75b4ceb80eebf9c26bcf961100fabbb78efa;hpb=eb6b50f631628f48b7e72432ae878e6ff0e306c3;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xpress.h b/include/configs/xpress.h
index dc7a75b..e13b792 100644
--- a/include/configs/xpress.h
+++ b/include/configs/xpress.h
@@ -12,19 +12,11 @@
 #include <asm/imx-common/gpio.h>
 
 /* SPL options */
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"
 
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(16 << 20)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
@@ -33,7 +25,6 @@
 #define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
 
 /* I2C configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
@@ -42,14 +33,12 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* Miscellaneous configurable options */
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x10000000)
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 #define CONFIG_SYS_HZ			1000
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_CMDLINE_EDITING
 
 /* Physical Memory Map */
@@ -66,9 +55,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
 /* Environment is in stored in the eMMC boot partition */
 #define CONFIG_ENV_SIZE			(16 << 10)
 #define CONFIG_ENV_IS_IN_MMC
@@ -77,15 +63,7 @@
 #define CONFIG_SYS_MMC_ENV_PART		1	/* boot parition */
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"  /* USDHC2 */
 
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_BMODE
-#define CONFIG_CMD_CACHE
-
 /* USB Configs */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
@@ -93,7 +71,6 @@
 
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_ENET_DEV		0
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR          0x0