X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxpedite537x.h;h=abbaeaad10b00fc9c4b44e42bc9a9213733c0cc4;hb=d56b4b19744c314c26dc77585a7c7a9253d1487d;hp=5d78560f3ee21aaffc881b34346ef5bc7338a037;hpb=66e399b68d20d96a90ba391d75c2290bd63bf4a5;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 5d78560..abbaeaa 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -29,7 +29,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
 #define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
 #define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
-#define CONFIG_FSL_ELBC		1
 
 /*
  * Multicore config
@@ -82,16 +81,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_MEMTEST_END		0x20000000
 #define CONFIG_POST			(CONFIG_SYS_POST_MEMORY | \
 					 CONFIG_SYS_POST_I2C)
-#define I2C_ADDR_LIST			{CONFIG_SYS_I2C_DS1621_ADDR,	\
-					 CONFIG_SYS_I2C_DS4510_ADDR,	\
-					 CONFIG_SYS_I2C_EEPROM_ADDR,	\
-					 CONFIG_SYS_I2C_LM90_ADDR,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR0,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR1,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR2,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR3,	\
-					 CONFIG_SYS_I2C_PEX8518_ADDR,	\
-					 CONFIG_SYS_I2C_RTC_ADDR}
 /* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */
 #define I2C_ADDR_IGNORE_LIST		{0x50}
 
@@ -210,7 +199,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
@@ -231,9 +219,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
 
 /* I2C DS1631 temperature sensor */
-#define CONFIG_SYS_I2C_DS1621_ADDR	0x48
-#define CONFIG_DTT_DS1621
-#define CONFIG_DTT_SENSORS		{ 0 }
 #define CONFIG_SYS_I2C_LM90_ADDR	0x4c
 
 /* I2C EEPROM - AT24C128B */
@@ -247,10 +232,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
 #define CONFIG_SYS_M41T11_BASE_YEAR	2000
 
-/* GPIO/EEPROM/SRAM */
-#define CONFIG_DS4510
-#define CONFIG_SYS_I2C_DS4510_ADDR	0x51
-
 /* GPIO */
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR0	0x18
@@ -356,12 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO