X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fxpedite537x.h;h=a4566b8384d3816da0b4049c0d054915655e0a86;hb=e89f8aae3d67cd3d2d04cedd9735c5e5fd32b621;hp=48f07b08c02e6fd568205e32ad8b9bcc14eab8cf;hpb=a6d4cd4778bcc30f451f2d5d92ec4722ff5b71cc;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 48f07b0..a4566b8 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -18,10 +18,6 @@
 #define CONFIG_SYS_FORM_3U_VPX	1
 #define CONFIG_BOARD_EARLY_INIT_R	/* Call board_pre_init */
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xfff80000
-#endif
-
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup */
 #define CONFIG_PCIE1		1	/* PCIE controller 1 */
 #define CONFIG_PCIE2		1	/* PCIE controller 2 */
@@ -76,21 +72,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Diagnostics
  */
-#define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x20000000
 #define CONFIG_POST			(CONFIG_SYS_POST_MEMORY | \
 					 CONFIG_SYS_POST_I2C)
-#define I2C_ADDR_LIST			{CONFIG_SYS_I2C_DS1621_ADDR,	\
-					 CONFIG_SYS_I2C_DS4510_ADDR,	\
-					 CONFIG_SYS_I2C_EEPROM_ADDR,	\
-					 CONFIG_SYS_I2C_LM90_ADDR,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR0,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR1,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR2,	\
-					 CONFIG_SYS_I2C_PCA953X_ADDR3,	\
-					 CONFIG_SYS_I2C_PEX8518_ADDR,	\
-					 CONFIG_SYS_I2C_RTC_ADDR}
 /* The XPedite5370 can host an XMC which has an EEPROM at address 0x50 */
 #define I2C_ADDR_IGNORE_LIST		{0x50}
 
@@ -201,7 +186,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
@@ -229,9 +213,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
 
 /* I2C DS1631 temperature sensor */
-#define CONFIG_SYS_I2C_DS1621_ADDR	0x48
-#define CONFIG_DTT_DS1621
-#define CONFIG_DTT_SENSORS		{ 0 }
 #define CONFIG_SYS_I2C_LM90_ADDR	0x4c
 
 /* I2C EEPROM - AT24C128B */
@@ -245,10 +226,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
 #define CONFIG_SYS_M41T11_BASE_YEAR	2000
 
-/* GPIO/EEPROM/SRAM */
-#define CONFIG_DS4510
-#define CONFIG_SYS_I2C_DS4510_ADDR	0x51
-
 /* GPIO */
 #define CONFIG_PCA953X
 #define CONFIG_SYS_I2C_PCA953X_ADDR0	0x18
@@ -321,7 +298,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  * Networking options
  */
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_TSEC_TBI
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
@@ -352,33 +328,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_HAS_ETH1
 
 /*
- * Command configuration.
- */
-#define CONFIG_CMD_DS4510
-#define CONFIG_CMD_DS4510_INFO
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PCI_ENUM
-#define CONFIG_CMD_REGINFO
-
-/*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-#define CONFIG_CMDLINE_EDITING	1		/* add command line history	*/
-#define CONFIG_AUTO_COMPLETE	1		/* add autocompletion support */
 #define CONFIG_LOADADDR		0x1000000	/* default location for tftp and bootm */
-#define CONFIG_PANIC_HANG			/* do not reset board on panic */
 #define CONFIG_PREBOOT				/* enable preboot variable */
 #define CONFIG_INTEGRITY			/* support booting INTEGRITY OS */
 
@@ -393,7 +346,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Environment Configuration
  */
-#define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_SECT_SIZE	0x20000		/* 128k (one sector) for env */
 #define CONFIG_ENV_SIZE		0x8000
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - (256 * 1024))